Milligrams

This usefulness of the correlation is twq-fpld first it provides information on the cetane indices that are not aViit le in the literature as in the cases of polynuclear aromatics and sulfur-containing aromatics, and second it helps provide an evaluation of the cetane index based on a few milligrams of sample, instead of the liter or so required for the motor method. 

A further advancement in organic synthesis was the accomplishment of multi-step syntheses comprising 20 and more steps and the synthesis of rather unstable organic compounds. It was now feasible to do an experiment on a milligram scale and to separate and identify products from by-products in order to analyze them separately. The application of selective reagents or reaction conditions allowed the synthesis of enantiomerically or diastereomerically pure compounds. 

In 1934, scientists discovered that when they bombarded natural bismuth (209Bi) with neutrons, 210Bi, the parent of polonium, was obtained. Milligram amounts of polonium may now be prepared this way, by using the high neutron fluxes of nuclear reactors. 

Polonium-210 is a low-melting, fairly volatile metal, 50% of which is vaporized in air in 45 hours at 55C. It is an alpha emitter with a half-life of 138.39 days. A milligram emits as many alpha particles as 5 g of radium. 

Polonium-210 is very dangerous to handle in even milligram or microgram amounts, and special equipment and strict control is necessary. Damage arises from the complete absorption of the energy of the alpha particle into tissue. 

Micrograms of solute per gram of solution for aqueous solutions the units are often expressed as milligrams of solute per liter of solution (ppm). 

A city s water supply is fluoridated by adding NaF. The desired concentration of F is 1.6 ppm. How many milligrams of NaF should be added per gallon of treated water if the water supply already is 0.2 ppm in F ... 

Shown in the following rows are results for the determination of acetaminophen (in milligrams) in ten separate tablets of Excedrin Extra Strength Pain Reliever. ... 

Salem and Galan have developed a new method for determining the amount of morphine hydrochloride in tablets. Results, in milligrams, for several tablets containing different nominal dosages follow... 

Converting from moles to grams, and rearranging to solve for milligrams of carbon gives... 

Parts per million is the same as milligrams of analyte per liter of solution thus, the total suspended solids for the sample is... 

CO2 is determined by titrating with a standard solution of NaOH to the phenolphthalein end point, or to a pH of 8.3, with results reported as milligrams CO2 per liter. This analysis is essentially the same as that for the determination of total acidity, and can only be applied to water samples that do not contain any strong acid acidity. 

The content of ascorbic acid, in milligrams per 100 mL, in orange juice is determined by a redox titration using either 2,6-dichlorophenolindephenol or N-bromosuccinimide as the titrant. 

Animal fats and vegetable oils are triacylglycerols, or triesters, formed from the reaction of glycerol (1,2, 3-propanetriol) with three long-chain fatty acids. One of the methods used to characterize a fat or an oil is a determination of its saponification number. When treated with boiling aqueous KOH, an ester is saponified into the parent alcohol and fatty acids (as carboxylate ions). The saponification number is the number of milligrams of KOH required to saponify 1.000 g of the fat or oil. In a typical analysis, a 2.085-g sample of butter is added to 25.00 ml of 0.5131 M KOH. After saponification is complete, the excess KOH is back titrated with 10.26 ml of0.5000 M HCl. What is the saponification number for this sample of butter ... 

Directions are provided for constructing and characterizing an ammonium ion-selective electrode. The electrode is then modified to respond to urea by adding a few milligrams of urease and covering with a section of dialysis membrane. Directions for determining urea in serum also are provided. 

Analysis of a 1.000-mb sample, treated in the same manner as the standards, gives a peak current of 1.77 pA. Report the amount of sulfur present in the sample in milligrams per milliliter. 

A 2.00-mb sample of a solution containing an unknown amount of glucose is diluted to 10 mb in a volumetric flask, and a steady-state current of 23.6 is measured. What is the concentration of glucose in the sample in milligrams per 100 mb ... 

A quantitative analysis for vitamin Bi was carried out using this procedure. When a solution of 100.0 ppm Bi and 100.0 ppm o-ethoxybenzamide was analyzed, the peak area for vitamin Bi was 71 % of that for the internal standard. The analysis of a 0.125-g vitamin B complex tablet gave a peak area for vitamin Bi that was 1.82 times as great as that for the internal standard. How many milligrams of vitamin Bi are in the tablet ... 

The concentration of insulin in a production vat is determined by the method of isotope dilution. A 1.00-mg sample of insulin labeled with with an activity of 549 cpm, is added to a 10.0-mL sample taken from the production vat. After homogenizing the sample, a portion of the insulin is separated and purified, yielding 18.3 mg of pure insulin. The activity for the isolated insulin is measured at 148 cpm. How many milligrams of insulin are in the original sample ... 

The vitamin B12 content of a multivitamin tablet is determined by dissolving ten tablets in water. The dissolved tablets are transferred to a 100-mL volumetric flask and diluted to volume. A 50.00-mL portion is removed and treated with 0.500 mg of radioactive vitamin B12 having an activity of 572 cpm. After homogenization, the vitamin B12 in the sample is isolated and purified, producing 18.6 mg with an activity of 361 cpm. Calculate the average concentration of vitamin B12 in the tablet (in milligrams per tablet). 

As part of a collaborative study of a new method for determining the amount of total cholesterol in blood, two samples were sent to ten analysts with instructions to analyze each sample one time. The following results, in milligrams of total cholesterol per 100 mb of serum, were obtained... 

---