Metals silicon carbides

F RESULTS FOR SPECIFIC METAL-SILICON CARBIDE INTERFACES... 

A similar reaction route has been developed for reaction bonded mullite (RBM, aluminum silicate). In this case the powder formulation also includes a source of silicon (silicon metal, silicon carbide, or silica), in addition to aluminum metal and alumina, and the final product contains mullite as the major phase. The RBM process is frequently modified by additions of zircon (ZrSi04), which provide an additional source of silicon and result in a dispersion of fine zirconia particles in the product which restricts grain growth to ensure a fine uniform microstructure. It is again possible to reduce residual porosity while retaining the near-net-shape characteristics, but at the time of writing this process is still under development and some way from commercial exploitation. 

Chrome—nickel alloy heating elements that commonly ate used in low temperature furnaces are not suitable above the very low end of the range. Elements commonly used as resistors are either silicon carbide, carbon, or high temperature metals, eg, molybdenum and tungsten. The latter impose stringent limitations on the atmosphere that must be maintained around the heating elements to prevent rapid element failure (3), or the furnace should be designed to allow easy, periodic replacement. 

Developments in metal-matrix composites technology has resulted in aluminum matrix materials filled with siUcon carbide [409-21 -2] SiC, (see Carbides, silicon carbide) particles (15 to 60 vol %) that provide the possibihty of weight reduction for brakes (20). These composite materials are being tested and evaluated. 

Carbon forms binary compounds with most elements those with metals are considered in this section whilst those with H, the halogens, O, and the chalcogens are discussed in subsequent sections. Alkali metal fullerides and encapsulated (endohedral) metallafullerenes have already been considered (pp. 285, 288 respectively) and met-allacarbohedrenes (metcars) will be dealt with later in this section (p. 300). Silicon carbide is discussed on p. 334. General methods of preparation of metal carbides are ... 

Non-metallic Materials Carbides, carbon, ceramic fiber, ceramic, cermet, composite, cork, elastomer, felt, fiber, glass, glycerin, non-metallic bearing material, rubber (natural), rubber (synthetic), silicone, wood, leather. 

Carbon forms ionic carbides with the metals of Groups 1 and 2, covalent carbides with nonmetals, and interstitial carbides with d-block metals. Silicon compounds are more reactive than carbon compounds. They can act as Lewis acids. 

An., Continuous Silicon Carbide Metal Matrix Composites, Technical Brochure, Textron Specialty Materials, Lowell, MA... 

Carbides produced by CVD include the refractory-metal carbides and two important non-metallic carbides boron carbide and silicon carbide. The refractory-metal carbides consist of those of the nine transition elements of Groups IVa, Va, and Via and the 4th, 5th, and 6th Periods as shown below in Table 9.1. 

The atomic and crystalline structure of the two non-metallic carbides, boron and silicon carbides, is less complex than that of the... 

Silicon, like carbon, is relatively inactive at ordinary temperatures. But, when heated, it reacts vigorously with the halogens (fluorine, chlorine, bromine, cmd iodine) to form halides and with certain metals to form silicides. It is unaffected by all acids except hydrofluoric. At red heat, silicon is attacked by water vapor or by oxygen, forming a surface layer of silicon dioxide. When silicon and carbon are combined at electric furnace temperatures of 2,000 to 2,600 °C (3,600 to 4700 °F), they form silicon carbide (Carborundum = SiC), which is an Importeint abrasive. When reacted with hydrogen, silicon forms a series of hydrides, the silanes. Silicon also forms a series of organic silicon compounds called silicones, when reacted with various organic compounds. 

In the drying of compound intermediates of refractory and reactive metals, particular attention is given to the environment and to the materials so that the compound does not pick up impurities during the process. A good example is the drying of zirconium hydroxide. After the solvent extraction separation from hafnium, which co-occurs with zirconium in the mineral zircon, the zirconium values are precipitated as zirconium hydroxide. The hydroxide is dried first at 250 °C for 12 h in air in stainless steel trays and then at 850 °C on the silicon carbide hearth of a muffle furnace. 

Roewer G, Herzog U, Trommer K, Muller E, Friihauf S (2002) Silicon Carbide - A Survey of Synthetic Approaches, Properties and Applications 101 59-136 Rosa A, Ricciardi G, Gritsenko O, Baerends EJ (2004) Excitation Energies of Metal Complexes with Time-dependent Density Functional Theory 112 49-116 Rosokha SV, Kochi JK (2007) X-ray Structures and Electronic Spectra of the n-Halogen Complexes between Halogen Donors and Acceptors with jc-Receptors. 126 137-160 Rudolf P, see Golden MS (2004) 109 201-229... 

As these experiments indicate, polysilanes can in some cases be converted to silicon carbide directly, without the necessity for formation of polycarbosilane, fractionation, or oxidation. For example, polysilastyrene copolymers can be formed into films or fibers and then crosslinked by irradiation with UV light. The crosslinked polysilane forms silicon carbide when heated to 1100°C in vacuum. (1U This method can be used in a "printing" mode, if a film of polysilane is cast onto a ceramic or metal substrate, then... 

Silicon-containing ceramics include the oxide materials, silica and the silicates the binary compounds of silicon with non-metals, principally silicon carbide and silicon nitride silicon oxynitride and the sialons main group and transition metal silicides, and, finally, elemental silicon itself. There is a vigorous research activity throughout the world on the preparation of all of these classes of solid silicon compounds by the newer preparative techniques. In this report, we will focus on silicon carbide and silicon nitride. 

Other organosilicon polymer precursors for ceramics have either been prepared or improved by means of transition metal complex-catalyzed chemistry. For instance, the Nicalon silicon carbide-based ceramic fibers are fabricated from a polycarbosilane that is produced by thermal rearrangement of poly(dimethylsilylene) [18]. The CH3(H)SiCH2 group is the major constituent of this polycarbosilane. 

Along with compound semiconductor nanoparticles, nanoparticles of many other materials, including metals, metal oxides, carbides, borides, nitrides, silicon, and other elemental... 

Apart from the reactions described above for the formation of thin films of metals and compounds by the use of a solid source of the material, a very important industrial application of vapour phase transport involves the preparation of gas mixtures at room temperature which are then submitted to thermal decomposition in a high temperature furnace to produce a thin film at this temperature. Many of the molecular species and reactions which were considered earlier are used in this procedure, and so the conclusions which were drawn regarding choice and optimal performance apply again. For example, instead of using a solid source to prepare refractory compounds, as in the case of silicon carbide discussed above, a similar reaction has been used to prepare titanium boride coatings on silicon carbide and hafnium diboride coatings on carbon by means of a gaseous input to the deposition furnace (Choy and Derby, 1993) (Shinavski and Diefendorf, 1993). 

---