Metal Oxides methane oxidation

The elimination of alcohol from P-alkoxypropionates can also be carried out by passing the alkyl P-alkoxypropionate at 200—400°C over metal phosphates, sihcates, metal oxide catalysts (99), or base-treated zeoHtes (98). In addition to the route via oxidative carbonylation of ethylene, alkyl P-alkoxypropionates can be prepared by reaction of dialkoxy methane and ketene (100). 

The process can be operated in two modes co-fed and redox. The co-fed mode employs addition of O2 to the methane/natural gas feed and subsequent conversion over a metal oxide catalyst. The redox mode requires the oxidant to be from the lattice oxygen of a reducible metal oxide in the reactor bed. After methane oxidation has consumed nearly all the lattice oxygen, the reduced metal oxide is reoxidized using an air stream. Both methods have processing advantages and disadvantages. In all cases, however, the process is mn to maximize production of the more desired ethylene product. 

The most successful class of active ingredient for both oxidation and reduction is that of the noble metals silver, gold, ruthenium, rhodium, palladium, osmium, iridium, and platinum. Platinum and palladium readily oxidize carbon monoxide, all the hydrocarbons except methane, and the partially oxygenated organic compounds such as aldehydes and alcohols. Under reducing conditions, platinum can convert NO to N2 and to NH3. Platinum and palladium are used in small quantities as promoters for less active base metal oxide catalysts. Platinum is also a candidate for simultaneous oxidation and reduction when the oxidant/re-ductant ratio is within 1% of stoichiometry. The other four elements of the platinum family are in short supply. Ruthenium produces the least NH3 concentration in NO reduction in comparison with other catalysts, but it forms volatile toxic oxides. 

Screening of metal oxide catalysts for carbon nanotubes and hydrogen production via catalytic decomposition of methane... 

The effect of metal oxide-Ti02 catalysts on methane conversions and hydrogen y ... 

Spectroscopy of the PES for reactions of transition metal (M ) and metal oxide cations (MO ) is particularly interesting due to their rich and complex chemistry. Transition metal M+ can activate C—H bonds in hydrocarbons, including methane, and activate C—C bonds in alkanes [18-20] MO are excellent (and often selective) oxidants, capable of converting methane to methanol [21] and benzene to phenol [22-24]. Transition metal cations tend to be more reactive than the neutrals for two general reasons. First, most neutral transition metal atoms have a ground electronic state, and this... 

In 1990, Schroder and Schwarz reported that gas-phase FeO" " directly converts methane to methanol under thermal conditions [21]. The reaction is efficient, occuring at 20% of the collision rate, and is quite selective, producing methanol 40% of the time (FeOH+ + CH3 is the other major product). More recent experiments have shown that NiO and PtO also convert methane to methanol with good efficiency and selectivity [134]. Reactions of gas-phase transition metal oxides with methane thus provide a simple model system for the direct conversion of methane to methanol. These systems capture the essential chemistry, but do not have complicating contributions from solvent molecules, ligands, or multiple metal sites that are present in condensed-phase systems. 

Methane-to-methanol conversion by gas-phase transition metal oxide cations has been extensively studied by experiment and theory see reviews by Schroder, Schwarz, and co-workers [18, 23, 134, 135] and by Metz [25, 136]. We have used photofragment spectroscopy to study the electronic spectroscopy of FeO" " [47, 137], NiO [25], and PtO [68], as well as the electronic and vibrational spectroscopy of intermediates of the FeO - - CH4 reaction. [45, 136] We have also used photoionization of FeO to characterize low lying, low spin electronic states of FeO [39]. Our results on the iron-containing molecules are presented in this section. 

The Oxidative Transformation of Methane over the Nickel-based Catalysts Modified by Alkali Metal Oxide and Rare Earth Metal Oxide... 

The large amounts of natural gas (mainly methane) found worldwide have led to extentive research programs in the area of the direct conversion of methane [1-3]. Ihe oxidative transformation of methane (OTM) is an important route for the effective utilization of the abundant natural gas resources. How to increase catalyst activity is a common problem on the activation of methane. The oxidation of methane over transition m al oxides is always high active, but its main product is CO2, namely the product of deep oxidation. It is because transition metal oxides have high oxidative activity. So, they were usually used as the main corrqtonent of catalysts for the conqilete oxidation of alkane[4]. The strong oxidative activity of CH4 over tran on metal oxides such as NiO indicates that the activation of C-H bond over transition metal oxides is much easier than that over alkaline earth metal oxides and rare earth metal oxides. Furthermore, the activation of C-H bond is the key step of OTM reaction. It is the reason that we use transition metal oxides as the mam conq>onent of the OTM catalysts. However, we have to reahze that the selectivity of OTM over transition metal oxides is poor. 

We expected to control the direction of OTM reaction over NiO by sur ce modification, namely making use of the interaction between NiO and other conq>onents to beget a synergistic effect. In this paper, two completely different behaviors of the oxidative transformation of methane were performed over the nickel-based catalysts because of the different modifications by alkali metal oxide and rare earth metal oxide and the different interactions between nickel and supports. Furthermore, the two completely different reactions were related with the acid-base properties of catalysts and the states of nickel present. 

Semiconductor electrodes seem to be attractive and promising materials for carbon dioxide reduction to highly reduced products such as methanol and methane, in contrast to many metal electrodes at which formic acid or CO is the major reduction product. This potential utility of semiconductor materials is due to their band structure (especially the conduction band level, where multielectron transfer may be achieved)76 and chemical properties (e.g., C02 is well known to adsorb onto metal oxides and/ or noble metal-doped metal oxides to become more active states77-81). Recently, several reports dealing with C02 reduction at n-type semiconductors in the dark have appeared, as described below. 

Suib et al. [77] used microwaves to generate plasma in an atmosphere containing methane and oxygen. The plasma passing over a metal or metal oxide catalyst led to formation of C2 hydrocarbons and some oxygenates. 

Metal oxide-mediated oxidation of methane using air as a primary oxidant is an alternative way to produce N2-free syngas. The concept is based on the oxidation of methane by transition metal oxides in high-oxidation state yielding syngas and corresponding metal oxide in a low-oxidation state ... 

Another way to eliminate the oxygen plant is to react a metal oxide with methane to yield the synthesis gas in a fluidized-bed reactor (83-86). Experiments have shown that copper oxide readily oxidizes methane to carbon monoxide and hydrogen with high selectivity at a temperature of about 1200 K and that the reduced CuO can be reoxidized with air. Lewis et al. (83-86)... 

It is important to emphasize that the atomic oxygen anion-radical plays a role in catalytic oxidation occnrring on varions oxide surfaces. For instance, O reacts with methane at room temperatnre over varions metal oxides (Lee and Gralowsky 1992). On solid catalysis, Q- is more reactive toward alkanes and alkenes than other ionic oxygen species. Iwamoto and Lnnsford (1980) assumed that O is the active oxygen species oxidizing benzene to phenol on with 70% selectivity at... 

Besides oxidative coupling of methane and double bond isomerization reactions (242), a limited number of organic transformations have been carried out with alkali-doped alkaline earth metal oxides, including the gas-phase condensation of acetone on MgO promoted with alkali (Li, Na, K, or Cs) or alkaline earth (Ca, Sr, or Ba) (14,120). The basic properties of the samples were characterized by chemisorption of CO2 (Table VI). 

Krypton difluoride, 4313 Potassium hexaoxoxenonate-xenon trioxide, 4674 Tetrafluoroammonium hexafluoroxenate, 4386 Xenon difluoride dioxide, 4322 Xenon difluoride oxide, 4319 Xenon difluoride, 4332 Xenon hexafluoride, 4377 Xenon tetrafluoride, 4353 Xenon tetrafluoride oxide, 4346 Xenon tetraoxide, 4863 Xenon trioxide, 4857 Xenon(ll) fluoride methane sulfonate, 0443 Xenon(ll) fluoride perchlorate, 3977 Xenon(ll) fluoride trifluoroacetate, 0634 Xenon(ll) fluoride trifluoromethanesulfonate, 0356 Xenon(lV) hydroxide, 4533 Xenon(ll) pentafluoroorthoselenate, 4382 Xenon(ll) pentafluoroorthotellurate, 4383 Xenon(ll) perchlorate, 4110 See other NON-METAL HALIDES, NON-METAL OXIDES... 

---