Metal ion complexation reactions

Humus can form stable complexes such as chelates with polyvalent cations. SOM is capable of strong polydentate binding to transition metals in a chelate [17,19,45, 65-67]. The complexation of metal ions by SOM is extremely important in affecting the retention and mobility of metal contaminants in solid phases and waters [45]. Several different types of SOM/humus-metal reactions can occur (Fig. 11), and include reactions between DOC-metal ions, complexation reactions between SOM-metal ions, and bottom sediments-metal ions. The functional groups of SOM (Fig. 10) have different affinities for metal ions as shown below ... 

A kinetic description of rapid metal ion complexation reactions. Desolvation of the primary coordination sphere of the metal ion is treated as the rate-limiting step in forming its inner-sphere coordination complex with a ligand. 

Metal-ion complexation reactions as they occur in strong solvating media like water consist in their most elementary form of the interaction of a hydrated metal cation with a hydrated ligand to form a hydrated complex, represented for a lanthanide and a simple mono anion as... 

This cell has also been utilized more recently for studying metal ion complexation reactions and the solubility of metal oxides/hydroxides to temperatures of 300 °C, which is the present working limit of this cell. Moreover, the surface charge characteristics of, and the adsorption of cations and anions onto, metal oxide surfaces in contact with aqueous solutions have been measured for the first time with this cell to temperatures in excess of 100°C, in fact to 250 °C. 

By the use of various transient methods, electrochemistry has found extensive new applications for the study of chemical reactions and adsorption phenomena. Thus, a combination of thermodynamic and kinetic measurements can be utilized to characterize the chemistry of heterogeneous electron-transfer reactions. Furthermore, heterogeneous adsorption processes (liquid-solid) have been the subject of intense investigations. The mechanisms of metal-ion complexation reactions also have been ascertained through the use of various electrochemical impulse techniques. 

Perhaps the most extensively studied catalytic reaction in acpreous solutions is the metal-ion catalysed hydrolysis of carboxylate esters, phosphate esters , phosphate diesters, amides and nittiles". Inspired by hydrolytic metalloenzymes, a multitude of different metal-ion complexes have been prepared and analysed with respect to their hydrolytic activity. Unfortunately, the exact mechanism by which these complexes operate is not completely clarified. The most important role of the catalyst is coordination of a hydroxide ion that is acting as a nucleophile. The extent of activation of tire substrate througji coordination to the Lewis-acidic metal centre is still unclear and probably varies from one substrate to another. For monodentate substrates this interaction is not very efficient. Only a few quantitative studies have been published. Chan et al. reported an equilibrium constant for coordination of the amide carbonyl group of... 

Table 3.1 summarises the influence of the diamine ligands on the equilibrium constant for binding of 3.8c to the ligand-metal ion complex (K ) and the second-order rate constant for reaction of the ternary complex (ICjat) (Scheme 3.5) with diene 3.9. 

The electric field-jump method is applicable to reactions of ions and dipoles. Application of a powerful electric field to a solution will favor the production of ions from a neutral species, and it will orient dipoles with the direction of the applied field. The method has been used to study metal ion complex formation, the binding of ions to macromolecules, and acid-base reactions. 

Metal ion complexation rates have been studied by the T-jump method. ° Divalent nickel and cobalt have coordination numbers of 6, so they can form complexes ML with monodentate ligands L with n = 1—6 or with bidentate ligands, n = 1-3. The ligands are Bronsted bases, and only the conjugate base form undergoes coordination with the metal ion. The complex formation reaction is then... 

In 1965, Breslow and Chipman discovered that zinc or nickel ion complexes of (E)-2-pyridinecarbaldehyde oxime (5) are remarkably active catalyst for the hydrolysis of 8-acetoxyquinoline 5-sulfonate l2). Some years later, Sigman and Jorgensen showed that the zinc ion complex of N-(2-hydroxyethyl)ethylenediamine (3) is very active in the transesterification from p-nitrophenyl picolinate (7)13). In the latter case, noteworthy is a change of the reaction mode at the aminolysis in the absence of zinc ion to the alcoholysis in the presence of zinc ion. Thus, the zinc ion in the complex greatly enhances the nucleophilic activity of the hydroxy group of 3. In search for more powerful complexes for the release of p-nitrophenol from 7, we examined the activities of the metal ion complexes of ligand 2-72 14,15). 

Figure 5a indicates the effect of the CTAB concentration on the rate constants of the complexes of 38b and 38c. In the case of the water soluble 38b ligand, the rate increases with increasing CTAB concentration up to a saturation level. This type of saturation kinetics is usually interpreted to show the incorporation of a ligand-metal ion complex into a micellar phase from a bulk aqueous phase, and the catalytic activity of the complex is higher in the micellar phase than in the aqueous phase. In the case of lipophilic 38c, a very similar curve as in Fig. 4 is obtained. At a first glance, there appears to be a big difference between these two curves. However, they are rather common in micellar reactions and obey the same reaction mechanism 27). 

Another features of the ligand lipophilicity and the- stability of the complex on the rates are shown in Fig. 6 Rate saturation corresponds to the formation of a 1 1 or 2 1 ligand-metal ion complex. Non-micellar reactions of curves b and c indicate that the N-butyl ligand 38b forms a more active complex than N-methyl ligand 38a does. It may be interesting to note that in the micellar reaction of 38b, a flat... 

In contrast to 1, isomeric p-nitrophenyl nicotinate shows almost no catalysis. Thus, it is clear that substrate coordination to the metal ion complex plays the critical role for an enormous rate enhancement. The lipophilic ester (R = C5Hn) also undergoes a large rate enhancement indicating the importance of substrate binding into the micellar phase by hydrophobic interaction. A large rate enhancement can also be seen in lipophilic esters which lack the metal coordination site as given below with the enantioselective micellar reactions (Table 9, 10). 

For ketones and aldehydes in which adjacent substituents permit the possibility of chelation with a metal ion, the stereochemistry can often be interpreted in terms of the steric requirements of the chelated TS. In the case of a-alkoxyketones, for example, an assumption that both the alkoxy and carbonyl oxygens are coordinated with the metal ion and that addition occurs from the less hindered face of this chelate correctly predicts the stereochemistry of addition. The predicted product dominates by as much as 100 1 for several Grignard reagents.120 Further supporting the importance of chelation is the correlation between rate and stereoselectivity. Groups that facilitate chelation cause an increase in both rate and stereoselectivity.121 This indicates that chelation not only favors a specific TS geometry, but also lowers the reaction barrier by favoring metal ion complexation. 

Figure 12 [115] shows a series of complex formation titration curves, each of which represents a metal ion-ligand reaction that has an overall equilibrium constant of 1020. Curve A is associated with a reaction in which Mz+ with a coordination number of 4 reacts with a tetradentate ligand to form an ML type complex. Curve B relates to a reaction in which Mz+ reacts with bidentate ligands in two steps, first to give ML complexes, and finally close to 100% ML2 complexes in the final stages of the titration. The formation constant for the first step is 1012, and for the second 108. Curve C refers to a unidentate ligand that forms a series of complexes, ML, ML2. .. as the titration proceeds, until ultimately virtually 100% of Mz+ is in the ML4 complex form. The successive formation constants are 108 for ML, 106 for ML2, 104 for ML3, and 102 for ML4 complexes. 

Bob s research interests and knowledge across chemistry were great. Throughout his career he retained an interest in biomimetic chemistry, specifically the study of metal ion-promoted reactions and reactions of molecules activated by metal ion coordination. His early interests in carbohydrate chemistry inspired him to study metal ion catalysis of both peptide formation and hydrolysis as well as studies in inorganic reaction mechanisms. He was particularly interested in the mechanisms of base-catalyzed hydrolysis within metal complexes and the development of the so-called dissociative conjugate-base (DCB) mechanism for base-catalyzed substitution reactions at inert d6 metal ions such as Co(III). 

The generally accepted process for metal ion-catalyzed reactions of the sort we consider here involves pre-equilibrium binding with the substrate, followed by a reaction of the complex as schematized in Equation (1). Whether the metal ion is free or complexed by ligands, or bears an associated lyate, or whether the substrate is neutral or anionic, these appear to be just the sort of processes one might expect to experience large rate accelerations in passing from water to a medium of reduced dielectric constant such as alcohols or other lower polarity solvents. 

To conduct meaningful mechanistic and kinetic studies in alcohol media reliable and simple measurement and control of the solution jjpH is essential. Potentiometric titration is the method of choice for obtaining acid dissociation constants or metal ion complex stability constants and in favorable cases the speciation of mixtures of metal-ion-containing complexes in solution can be proposed.20 Titrations in non-aqueous solvents are not nearly as widely reported as those in aqueous media, particularly in cases with metal ions21 and determination of pH in a non-aqueous solvent referenced to that solvent is complicated due to the lack of a way to relate the electrode EMF readings to absolute jjpH (see footnote and ref. 6) so non-aqueous solvents are generally inconvenient to use22 for detailed studies of reaction mechanisms where pH control is required. 

---