Mechanical properties modification

Sinko CM, Carlson GT, Beckwith BA. Mechanical property modification of powder. Proceedings of the First International Particle Technology Forum, Denver, CO, 1994 121. 

Properties. Pure thorium metal is a dense, bright silvery metal having a very high melting point. The metal exists in two allotropic modifications. Thorium is a reactive, soft, and ductile metal which tarnishes slowly on exposure to air (12). Having poor mechanical properties, the metal has no direct stmctural appHcations. A survey of the physical properties of thorium is summarized in Table 1. Thorium metal is diamagnetic at room temperature, but becomes superconducting below 1.3—1.4 K. 

Modification of the membranes affects the properties. Cross-linking improves mechanical properties and chemical resistivity. Fixed-charge membranes are formed by incorporating polyelectrolytes into polymer solution and cross-linking after the membrane is precipitated (6), or by substituting ionic species onto the polymer chain (eg, sulfonation). Polymer grafting alters surface properties (7). Enzymes are added to react with permeable species (8—11) and reduce fouling (12,13). 

Modifications of the wood surface can be performed by various physical, mechanical and chemical treatments. Chemical treatments especially are performed in order to enhance the dimensional stability, but also for amelioration of physical and mechanical properties or a higher resistance against physical, chemical and biological degradation. 

Many modifications in metallocene structures have been incorporated, as shown in Fig. 9, to synthesize isotactic polypropylene with a range of properties including molecular weight, isotacticity, mechanical properties, etc. 

Grafting and modification of polymers have been found to have applications in the biomedical field. For example, poly(etherurethane), which has good elastomeric and often mechanical properties and a relatively high compatibility with blood, has been used in the man-... 

The synthesis of new polymeric materials having complex properties has recently become of great practical importance to polymer chemistry and technology. The synthesis of new materials can be prepared by either their monomers or modification of used polymers in industry. Today, polystyrene (PS), which is widely used in industrial applications as polyolefins and polyvinylchlorides, is also used for the production of plastic materials, which are used instead of metals in technology. For this reason, it is important to synthesize different PS plastic materials. Among the modification of PS, two methods can be considered, viz. physical and chemical modifications. These methods are extensively used to increase physico-mechanical properties, such as resistance to strike, air, or temperature for the synthesizing of new PS plastic materials. 

New elastic polymeric materials (resistance to higher stroke or air) can be obtained by using physical modification methods, but using this method, two phases (PS and rubber) in the mixture were formed. Small rubber particles spread as a PS layer and, after awhile, the relationship between the layers decreases and rubber particles gather in the upper layer of the materials. This can be the cause of the loss of resistance of the materials. These material disadvantages have stimulated the polymer synthesis to increase the PS resistance to higher physico-mechanical properties, such as higher temperature and stroke for the chemical modification of PS with various functional modifiers. 

Grafting reactions alter the physical and mechanical properties of the polymer used as a substrate. Grafting differs from normal chemical modification (e.g., functionalization of polymers) in the possibility of tailoring material properties to a specific end use. For example, cellulose derivatization improves various properties of the original cellulose, but these derivatives cannot compete with many of the petrochemically derived synthetic polymers. Thus, in order to provide a better market position for cellulose derivatives, there is little doubt that further chemical modification is required. Accordingly, grafting of vinyl monomers onto cellulose or cellulose derivatives may improve the intrinsic properties of these polymers. 

Electric discharge methods are known [31] to be very effective for nonactive polymer substrates such as polystyrene, polyethylene, polypropylene, etc. They are successfully used for cellulose-fiber modification to decrease the melt viscosity of cellulose-polyethylene composites [32] and to improve the mechanical properties of cellulose-polypropylene composites [28]. 

The surface energy of fibers is closely related to the hydrophilicity of the fiber [38]. Some investigations are concerned with methods to decrease hydrophilicity. The modification, of wood cellulose fibers with stearic acid [43] hydrophobizes those fibers and improves their dispersion in polypropylene. As can be observed in jute-reinforced unsaturated polyester resin composites, treatment with polyvinylacetate increases the mechanical properties [24] and moisture repellency. 

Analog-to-glass fibers silanes are used as coupling agents for natural fiber polymer composites. For example, the treatment of wood fibers with product A-175 improves wood dimensional stability [53]. In contrast, a decrease of mechanical properties was observed for coir-UP composites after a fiber modification with di-chloromethylvinyl silane [54]. The treatment of mercer-... 

The mechanical properties of composites are mainly influenced by the adhesion between matrix and fibers of the composite. As it is known from glass fibers, the adhesion properties could be changed by pretreatments of fibers. So special process, chemical and physical modification methods were developed. Moisture repel-lency, resistance to environmental effects, and, not at least, the mechanical properties are improved by these treatments. Various applications for natural fibers as reinforcement in plastics are encouraged. 

ABS has a specific gravity of 1.03 to 1.06 and a tensile strength in the range of 6 to 7.5 X 10 psi. These polymers are tough plastics with outstanding mechanical properties. A wide variety of ABS modifications are available with heat resistance comparable to or better than polysulfones and polycarbonates (noted later in this section). Another outstanding property of ABS is its ability to be alloyed with other thermoplastics for improved properties. For example, ABS is alloyed with rigid PVC for a product with better flame resistance. 

However, the chief purpose of introduction of fillers into PCM is to make possible the modification of polymers and thereby create materials with a prescribed set of physico-mechanical properties, and, obviously, the properties of filled materials may be controlled by, for example, varying the type of the base polymer (the matrix ) and filler, its particle size distribution and shape. It may not require a large quantity of filler [7]. Thanks to considerable advances in PCM research, their use in a broad range of industries — machine building, construction, aerospace technology, etc. — has become extensive [8 — 11]. 

It should be noted that for polymerization-modified perlite the strength parameters of the composition algo go up with the increasing initial particle size. [164]. In some studies it has been shown that the filler modification effect on the mechanical properties of composites is maximum when only a portion of the filler surface is given the polymerophilic properties (cf., e.g. [166-168]). The reason lies in the specifics of the boundary layer formation in the polymer-filler systems and formation of a secondary filler network . In principle, the patchy polymerophilic behavior of the filler in relation to the matrix should also have place in the failing polymerization-modified perlite. 

---