Mechanical alloy, definition

Mechanical alloying is a term, mostly used by metallurgists and ceramists, to describe a process where at least two materials, often metallic, are milled together to form an alloy. Material transfer is required either to homogenize the alloy or to provide a solid solution. The resulting material is usually heat treated to be consolidated. Thus, if one considers alloying as a chemical reaction, the term mechanical alloying would definitely be synonymous with mechanosynthesis. 

Mechanical history, heat, and impurities gready affect the mechanical properties. Pure zinc is ductile at room temperature and does not have a definite yield point as do most stmctural metals. Rather, it creeps under sufficient constant load. The impurities of commercial zinc and alloying metals are carefully controlled to achieve the desired mechanical properties. 

A polymer blend is a physical or mechanical blend (alloy) of two or more homopolymers or copolymers. Although a polymer blend is not a copolymer according to the above definition, it is mentioned here because of its commercial importance and the frequency with which blends are compared with chemically bonded copolymers. Another technologically significant material relative to the copolymer is the composite, a physical or mechanical combination of a polymer with some unlike material, eg, reinforcing materials such as carbon black, graphite fiber, and glass (see Composite materials). 

Whether there is currently a nanotechnology is a question of definition. If one asks whether there are (or are soon likely to be) commercial electronic fluidic, photonic, or mechanical devices with critical lateral dimensions less than 20 nm, the answer is no, although there may be in 10 to 20 years. There is, however, a range of important technologies—especially involving colloids, emulsions, polymers, ceramic and semiconductor particles, and metallic alloys—that currently exist. But there is no question that the field of nanoscience already exists. 

Corrosion is the deterioration of a material by reaction with its enviromnent. Although the term is used primarily in conjunction with the deterioration of metals, the broader definition allows it to be used in conjunction with all types of materials. We will limit the description to corrosion of metals and alloys for the moment and will save the degradation of other types of materials, such as polymers, for a later section. In this section, we will see how corrosion is perhaps the clearest example of the battle between thermodynamics and kinetics for determining the likelihood of a given reaction occurring within a specified time period. We will also see how important this process is from an industrial standpoint. For example, a 1995 study showed that metallic corrosion costs the U.S. economy about 300 billion each year and that 30% of this cost could be prevented by using modem corrosion control techniques [9], It is important to understand the mechanisms of corrosion before we can attempt to control it. 

It has been already mentioned in passing that indications exist in the literature showing that the 3C isomerization can take place by formation of at least two different 3C complexes, having different activation energies of isomerization, different particle size effects, different responses to alloying, etc. (157, 195-198). The suggestions presented above offer a choice of different complexes for further speculations. However, a definitive description of isomerization mechanisms under different conditions (H2 pressure, temperature, etc.) and with different catalysts (pure metals, alloys, etc.) is not yet possible. 

Such transformations have been extensively studied in quenched steels, but they can also be found in nonferrous alloys, ceramics, minerals, and polymers. They have been studied mainly for technical reasons, since the transformed material often has useful mechanical properties (hard, stiff, high damping (internal friction), shape memory). Martensitic transformations can occur at rather low temperature ( 100 K) where diffusional jumps of atoms are definitely frozen, but also at much higher temperature. Since they occur without transport of matter, they are not of central interest to solid state kinetics. However, in view of the crystallographic as well as the elastic and even plastic implications, diffusionless transformations may inform us about the principles involved in the structural part of heterogeneous solid state reactions, and for this reason we will discuss them. 

Corrosion is the deterioration a material undergoes as a result of its interaction with its surroundings. Although this definition is applicable to any type of material, it is usually reserved for metallic alloys. Of the 105 known chemical elements, approximately eighty are metals, and about half of these can be alloyed with other metals, giving rise to more than 40,000 different alloys. Each of the alloys will have different physical, chemical, and mechanical properties, but all of them can corrode to some extent, and in different ways. 

---