Mass spectroscopy INDEX

Mass Spectroscopy. A coUection of 125,000 spectra is maintained at Cornell University and is avaUable from John WUey Sons, Inc. (New York) on CD-ROM or magnetic tape. The spectra can be evaluated using a quaHty index algorithm (63,76). Software for use with the magnetic tape version to match unknowns is distributed by Cornell (77). The coUection contains aU avaUable spectral information, including isotopicaUy labeled derivatives, partial spectra, and multiple spectra of a single compound. 

The film thickness and retractive index were calculated using spectroscopic ellipsometry. X-ray photoelectron spectroscopy (XPS) was used for composition analysis. Auger electron spectroscopy (AES) and secondary ion mass spectroscopy (SIMS) was used to investigate the depth profiles of the film. 

After optimization of the correct capillary parameters (ID, OD, Lj), detection at the microscale level became the next major challenge for the survival of CE. Despite the challenges, many of the common HPLC detectors have a CE complement, e.g., absorbance, fluorescence, conductivity, photodiode array, and mass spectroscopy. Small dimensions mean universal detectors such as refractive index cannot be used. A sample of detectors will be discussed. The technical aspects of each detector will not be covered except in relation to the CE instrument. Readers are advised to consult an instrumentation textbook for more details on theory of operation. 

A column index can be created in order to speed access to the data in the column. For example, molecular weight might be an important column used in most searches of a mass spectroscopy database. If every row of the table has to be examined to determine if the value is between, say, 100 and 200, this would be slower than searching only those rows known to contain these values. One technique used to index columns of numerical data is to presort the values into a relatively small number of bins. The index records which rows belong to which bin. When searching for values between 100 and 200, only rows that belong to the appropriate bin need to be examined. 

Many methods have been used to determine the deuterium content of hydrogen gas or water. For H2/D2 mixtures mass spectroscopy and thermal conductivity can be used together with gas chromatography (alumina activated with manganese chloride at 77 K). For heavy water the deuterium content can be determined by density measurements, refractive index change, or infrared spectroscopy. 

The particle concentration of the eluent is normally measured by means of infrared or ultraviolet photometers. Additionally, fluorescence photometer, interferometric measurements (for the refractive index), or mass-spectroscopic methods (e.g. induced coupled plasma mass spectroscopy—ICP-MS, Plathe et al. 2010) are employed. The combination of different detection systems offers an opportunity for a detailed characterisation of multi-component particle systems. Note that the classification by FFF is not ideal and the relevant material properties are not always known moreover, the calibration of FFF is rather difficult. The attribution of particle size to residence time, thus, bears some degree of uncertainty. Recent developments of FFF instrumentation, therefore, include a particle-sizing technique additional to the flow channel and the quantity measurement (usually static and dynamic light scattering, Wyatt 1998 Cho and Hackley 2010). 

Analytical chemistry was once stricdy a hatch process, in which a sample would he collected and taken to a laboratory for analysis. However, modern processes continually analyze material during various stages of manufacture, using chromatography, mass spectroscopy, color, index of refraction, and other techniques. 

When simple Hquids like naphtha are cracked, it may be possible to determine the feed components by gas chromatography combined with mass spectrometry (gc/ms) (30). However, when gas oil is cracked, complete analysis of the feed may not be possible. Therefore, some simple definitions are used to characterize the feed. When available, paraffins, olefins, naphthenes, and aromatics (PONA) content serves as a key property. When PONA is not available, the Bureau of Mines Correlation Index (BMCI) is used. Other properties like specific gravity, ASTM distillation, viscosity, refractive index. Conradson Carbon, and Bromine Number are also used to characterize the feed. In recent years even nuclear magnetic resonance spectroscopy has been... 

Other techniques previously described for general investigation of tautomeric equilibria (76AHC(S1)1> involve heats of combustion, relaxation times, polarography, refractive index, molar refractivity, optical rotation, X-ray diffraction, electron diffraction, neutron diffraction, Raman, fluorescence, phosphorescence and photoelectron spectroscopy, and mass spectrometry. The application of several of these techniques to tautomeric studies has been discussed in previous sections. Other results from the more important of these will be referred to later in this section. 

---