Lupersol

Paraplex Resin-Bonded Explosive. Usually consists of Paraplex P-43/RDX/Al/Styrene monomer/ Lupersol DDM (as a polymerization catalyst) in the following percentages, viz 6.0/65.0/ 20.0/9.0/0.5. Density 1.65g/cc. The material is mixed and polymerized using the usual procedure for polyester resins and Plastic Bonded Expls (see in this Vol)... [Pg.490]

Method A Agitated Glass Ampoule. The bench scale apparatus developed for these runs consisted of a 12 mm O.D. glass ampoule suspended in a fluidized bed heater (Figure 1). Approximately 1 g of polypropylene pellets (Himont) were placed in the ampoule and preheated for 2 min. at 220°C. A 29 cm long screw with a pitch of 1 mm and a diameter of 6 mm driven at approximately 160 rpm was inserted into the ampoule. The appropriate amount of free-radical initiator, 2,5-dimethyl-2,5-bis(t-butyl peroxy) hexane (Lupersol 101, Lucidol), required for a 0.04 wt% initiator concentration was then injected into the sample... [Pg.510]

Formula 184, designated as "Rocket Igniter Pellet" contains Lupersol" catalyst - 2% incorporated in Laminae... [Pg.765]

Formula 168, designated as "First Fire for Illuminating Flares" contains binder Laminae 4110 or 4116 with 1.4% catalyst Lupersol DDM. Used in pressed-on form as the final igniting mixt in many illuminating flares and illuminating candles... [Pg.765]

Laminae Binder (Laminae 99 Lupersol 1%) NC lacquer or celluloid binder can also be used as a loose powder... [Pg.767]

Laminae 4116 +1% Lupersol DDM 5.0% Note Lupersol DDM catalyst is a 60% soln of ethyl methyl ketone peroxide in dimethyl-phthalate. Type II - Sr nitrate 50.0, TeNCbz... [Pg.1075]

Lupersol DDM. A proprietary catalyst of Wallace Tiernan, Inc, Buffalo, NY, contg 60% methylethylketone peroxide in dibutyl phthalate, used as the hardener in Laminae (qv) Refs 1) OrdTechTerm (June 1962), 183-R 2) Anon, EngDesHdbk, Military Pyrotechnics Series, Part Three — Properties of Materials Used in Pyrotechnic Compositions , AMCP 706-187 (Oct 1963), 183-4... [Pg.619]

Sold commercially as a 30-60% so In of a mixture of compounds corresponding to breaking one or both -0-0-1 irikages hydroperoxides, hydroxy-hydroperoxides, etc.) used to initiate polyester resin polymerization Lupersol DDNi is the trade name of Wallace Tieman, Inc, Lucidol Div, 1740 Military Rd, Buffalo, NY, 14205... [Pg.185]

Butonone Peroxide Dimer, MethylethyI ketone Peroxide, (C4H8Oz)2 mw 176.21, O 36.20% col thick oil, haying a pleasant odor stable at RT but explodes when heated above 100°, d 1.042 was obtd when butanone was treated with H202 in the presence of H2S04 sol in ale, eth or benz insol in w. The compd is completely reduced to methylethylketone by the action of nascent H in the cold it explodes violently when placed in contact with coned H2S04. Butanone peroxide is sold under the trade name "Lupersol DDM , by Wallace Tiernen, Inc, Buffalo, NY(Ref 3) Refs l)Beil 1, 6.68 2)J.Pastureau, CR 144,... [Pg.375]

The free radical polymerization was initiated at 131°C using styrene and LUPERSOL 233 (170 ppm). This mixture was then treated incrementally with sufficient amounts of zinc dimethacrylate dissolved in styrene monomer to prepared copolymers having a zinc diacrylate contents of 400 ppm, 600 ppm, and 800 ppm. The results of copolymer physical testing of these experimental agents is provided in Table 1. [Pg.699]

SYNS t-BUTYL PERACETATE t-BUTYL PEROXYACETATE tert-BUTYL PEROXYACETATE, >76% in solution (DOT) ETHANEPEROXOIC ACID, 1,1-DMETHYLETHYL ESTER LUPERSOL 70 TRIGONOX F-C50... [Pg.242]

SYNS t-BUTYL PEROXYPIVALATE tert-BUTYL PERPIVALATE tert-BUTYL TRIMETHYLPEROXY-ACETATE ESPEROX 31M LUPERSOL 11 TRIGONOX 25/75 TRIGONOX 25-C75... [Pg.242]

HI-POINT 180 HI-POINT PD-1 KETONOX LUCIDOL DELTAX LUPERSOL LUPERSOL DDA 30... [Pg.924]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...