Matter liquids

K. Seifert, Diplomarbeit, Technische Universitdt Wien 1995 (unpublished) K. Seifert, J. Hafner, and G. Kresse, 3rd Liquid Matter Conference, Norwich 1996. ... 

On this subject notice that, possibly combined with various heating methods, several physical effects may be considered which allow free flotation of solid and even liquid matter. Materials may be levitated for instance by a jet of gas, by intense sound waves or by beams of laser light. Conductors levitate in strong radiofrequency fields, charged particles in alternating electric fields, magnets above superconductors or vice versa. A review on levitation in physics with the description of several techniques and their principles and applications was made by Brandt (1989). 

Liquid Matter that has a definite volume but no definite shape, assuming the shape of its container. 

PARTICULATE MATTER. Solid or liquid matter that is dispersed in a gas, or insoluble solid matter dispersed in a liquid, that gives a heterogeneous mixture. 

Particle Very small but discrete mass of a solid or liquid matter. 

Schade H, Peter KProcess and device for separating solid and liquid matter from industrial wastewater by electroflotation. European Patent EP 686603 Al, 1995. 

Paresthesia Abnormal physical sensations such as numbness, prickling, or tingling Particle A very small but discrete mass of solid or liquid matter Particle concentration Concentration expressed in terms of number of particles per unit volume of air or another gas... 

The liquid or moisture in a spray droplet is present in two basic forms bound and unbound moisture. The nature of the solid and the liquid matter determines the drying characteristics of the product. 

Without taking into consideration the initial temperature and specific heat of the solid and liquid matter, radiation and... 

What is a crystal The boundary between crystalline and amorphous (or liquid) matter is variable and poorly defined. However, translational symmetry, even if only imperfectly attained, is fundamental to the determination (Chapter 3), the description (Chapter 2) and the theoretical interpretation of solid state structures. It represents the principal characteristic of the majority of solids. For this reason, this is the general theme of the present work. 

Very small pieces of solid or liquid matter, such as particles of soot, dust, aerosols, fumes, or mists, past climate analogs... 

Yes. One familiar example is a mixture of oil and water. The immiscible oil and water phases are two different phases of liquid matter. 

In regions of solid and liquid matter, where molar volume depends very little upon pressure const.), p increases almost linearly with p. This is different from gases where the p p) curve runs almost logarithmically and much more steeply (Fig. 5.7). 

Their sizes range from a few nanometers to a few micrometers often with pronounced concentration modes around a few tens of nm Aitken mode), in the range 100-500 nm (accumulation mode) and at a few (im (coarse mode) see Fig. 4.17. Coarse mode particles typically originate from the dispersion of solid and liquid matter such as soil, dust and sea spray (Chapter 2.6.4). Submicron particles are usually mixtures of primary particles (almost combustion products from biomass smoke and diesel soot) and secondary produced particles via the gas-to-particle conversion (most important is sulfuric acid from SO2 oxidation and organics from oxidation of VOCs). 

Particulates (solid or liquid matter such as dust, fog, fume, mist, smoke, or sprays) that are of a size that allows them to penetrate deep into the lungs upon inhalation. Respirator... 

---