Liquid chromatography-mass trace components

Biological samples (plasma, serum, blood, and urine) are very complex. They contain a wide variety of matrix components such as proteins, lipids, and salts. To quantify trace amount of analytes (e.g., drug and its metabolites) in complex biological samples by liquid chromatography-mass spectrometry (LC-MS), the samples should be properly treated prior to being injected onto an LC-MS instrument,... 

Gas chromatography/mass spectrometry (GC/MS) is routinely used for identifying volatile and non-polar components in crude oil, and the characterization of trace polar components is usually achieved by liquid chromatography/mass spectrometry (LC/MS). However, recent advances in mass spectrometry have enabled the development of novel ionization techniques that are potentially useful in addressing some issues associated with conventional mass spectrometric technologies. 

An important feature of modern high-performance liquid chromatography (HPLC) is its excellent quantitation capability. HPLC can be used to quantify the major components in a purified sample, the components of a reaction mixture, and trace impurities in a complex sample matrix. The quantitation is based on the detector response with respect to the concentration or mass of the analyte. In order to perform the quantitation, a standard is usually needed to calibrate the instrument. The calibration techniques include an external standard method, an internal standard method, and a standard addition method. For cases in which a standard is not available, a method using normalized peak area can be used to estimate the relative amounts of small impurities in a purified sample. 

In the early 90s, a new technique called solid-phase-micro extraction (SPME), was developed (Arthur and Pawliszyn, 1990). The key-part component of the SPME device is a fused silica fiber coated with an adsorbent material such as polydimethylsiloxane (PDMS), polyacrylate (PA) and carbowax (CW), or mixed phases such as polydimethylsiloxane-divinylbenzene (PDMS-DVB), carboxen-polydimethylsiloxane (CAR-PDMS) and carboxen-polydimethyl-siloxane-divinylbenzene (CAR-PDMS-DVB). The sampling can be made either in the headspace (Vas et al., 1998) or in the liquid phase (De la Calle et al., 1996) of the samples. The headspace sampling in wine analyses is mainly useful for quantifying trace compounds with a particular affinity to the fiber phase, not easily measurable with other techniques. Exhaustive overviews on materials used for the extraction-concentration of aroma compounds were published by Ferreira et al. (1996), Eberler (2001), Cabredo-Pinillos et al. (2004) and Nongonierma et al. (2006). Analysis of the volatile compounds is usually performed by gas chromatography (GC) coupled with either a flame ionization (FID) or mass spectrometry (MS) detector. 

---