Lipases monomers

On the other hand, the macrolides showed unusual enzymatic reactivity. Lipase PF-catalyzed polymerization of the macrolides proceeded much faster than that of 8-CL. The lipase-catalyzed polymerizability of lactones was quantitatively evaluated by Michaelis-Menten kinetics. For all monomers, linearity was observed in the Hanes-Woolf plot, indicating that the polymerization followed Michaehs-Menten kinetics. The V, (iaotone) and K,ax(iaotone)/ m(iaotone) values increased with the ring size of lactone, whereas the A (iactone) values scarcely changed. These data imply that the enzymatic polymerizability increased as a function of the ring size, and the large enzymatic polymerizability is governed mainly by the reachon rate hut not to the binding abilities, i.e., the reaction process of... 

The effects of the feed ratio in the lipase CA-catalyzed polymerization of adipic acid and 1,6-hexanediol were examined by using NMR and MALDI-TOF mass spectroscopies. NMR analysis showed that the hydroxyl terminated product was preferentially formed at the early stage of the polymerization in the stoichiometric substrates. As the reaction proceeded, the carboxyl-terminated product was mainly formed. Even in the use of an excess of the dicarboxylic acid monomer, the hydroxy-terminated polymer was predominantly formed at the early reaction stage, which is a specific polymerization behavior due to the unique enzyme catalysis. 

Divinyl esters reported first by us are efficient monomers for polyester production under mild reaction conditions. In the lipase PF-catalyzed polymerization of divinyl adipate and 1,4-butanediol in diisopropyl ether at 45°C, a polyester with molecular weight of 6.7 x 10 was formed, whereas adipic acid and diethyl adipate did not afford the polymeric materials under similar reaction conditions (Scheme 3). 

A combinatorial approach for biocatalytic production of polyesters was demonstrated. A library of polyesters were synthesized in 96 deep-well plates from a combination of divinyl esters and glycols with lipases of different origin. In this screening, lipase CA was confirmed to be the most active biocatalyst for the polyester production. As acyl acceptor, 2,2,2-trifluoroethyl esters and vinyl esters were examined and the former produced the polymer of higher molecular weight. Various monomers such as carbohydrates, nucleic acids, and a natural steroid diol were used as acyl acceptor. 

Polyester synthesis was carried out hy insertion-dehydration of glycols into polyanhydrides using lipase CA as catalyst (Scheme 6). The insertion of 1,8-octanediol into poly(azelaic anhydride) took place at 30-60°C to give the corresponding polyester with molecular weight of several thousands. Effects of the reaction parameters on the polymer yield and molecular weight were systematically investigated. The dehydration reachon also proceeded in water. The reaction behaviors depended on the monomer structure and reaction media. 

In vitro synthesis of polyesters using isolated enzymes as catalyst via non-biosynthetic pathways is reviewed. In most cases, lipase was used as catalyst and various monomer combinations, typically oxyacids or their esters, dicarboxylic acids or their derivatives/glycols, and lactones, afforded the polyesters. The enzymatic polymerization often proceeded under mild reaction conditions in comparison with chemical processes. By utilizing characteristic properties of lipases, regio- and enantioselective polymerizations proceeded to give functional polymers, most of which are difficult to synthesize by conventional methodologies. 

In 1985, a lipase-catalyzed polymerization of 10-hydroxydecanoic acid was reported. The monomer was polymerized in benzene using poly(ethylene glycol) (PEG)-modified lipase soluble in the medium [12]. The degree of polymerization (DP) of the product was more than 5. PEG-modified esterase from hog Ever and lipase from Aspergillus niger (lipase A) induced the oligomerization of glycolic acid [13]. 

Catalytic site of lipase is known to be a serine-residue and lipase-catalyzed reactions are considered to proceed via an acyl-enzyme intermediate. The mechanism of lipase-catalyzed polymerization of divinyl ester and glycol is proposed as follows (Fig. 3). First, the hydroxy group of the serine residue nucleophilically attacks the acyl-carbon of the divinyl ester monomer to produce an acyl-enzyme intermediate involving elimination of acetaldehyde. The reaction of the intermediate with the glycol produces 1 1 adduct of both... 

The polymerization of dimethyl maleate and 1,6-hexanediol proceeded using lipase CA catalyst in toluene to give the polymer exhibiting exclusively cis structure [55]. During the polymerization, cyclic oligomers were formed. The cycles were semi-crystalline, whereas the linear polymer was amorphous. In the lipase CA-catalyzed copolymerization of dimethyl maleate and dimethyl fumarate with 1,6-hexanediol, the content of the cyclization was found to depend mainly on the configuration and concentration of the monomers [56]. 

Lipase-Catalyzed Ring-Opening Polymerization of Cyclic Monomers... 

Polyester syntheses have been achieved by enzymatic ring-opening polymerization of lactide and lactones with various ring-sizes. Here, we focus not only on these cyclic esters but also other cyclic monomers for lipase-catalyzed ringopening polymerizations. Figure 8 summarizes cyclic monomers for providing polyesters via lipase catalysis. 

Fig. 8. Cyclic monomers providing polyesters via lipase catalysis...

Chemoenzymatic synthesis of biodegradable poly(malic acid) was performed by lipase-catalyzed polymerization of benzyl /J-malolactone, followed by the debenzylation [72]. The addition of a small amount of /J-PL (17 mol % for the monomer) increased Mw up to 3 x 104 [73]. 

The enzymatic polymerization of lactones is explained by considering the following reactions as the principal reaction course (Fig. 9) [83,85,95,96]. The key step is the reaction of the lactone with lipase involving the ring-opening of the lactone to give the acyl-enzyme intermediate (enzyme-activated monomer,... 

It should be mentioned that when a hexa(hydroxyl) initiator is used for the lipase catalyzed polymerization of s-CL, only one hydroxy function is active [100]. This leaves five remaining OH groups for polymerization of new or another monomers. Comb poly(e-CL)s have also been prepared [101, 102] starting from a copolymer of e-CL and 5-ethylene ketal-e-caprolactone as shown below ... 

---