Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Lewis acid catalysts ketones

As anticipated from the complexation experiments, reaction of 4.42 with cyclopentadiene in the presence of copper(II)nitrate or ytterbium triflate was extremely slow and comparable to the rate of the reaction in the absence of Lewis-acid catalyst. Apparently, Lewis-acid catalysis of Diels-Alder reactions of p-amino ketone dienophiles is not practicable. [Pg.115]

Sulfur tetrafluoride [7783-60-0] SF, replaces halogen in haloalkanes, haloalkenes, and aryl chlorides, but is only effective (even at elevated temperatures) in the presence of a Lewis acid catalyst. The reagent is most often used in the replacement of carbonyl oxygen with fluorine (15,16). Aldehydes and ketones react readily, particularly if no alpha-hydrogen atoms are present (eg, benzal fluoride [455-31-2] from benzaldehyde), but acids, esters, acid chlorides, and anhydrides are very sluggish. However, these reactions can be catalyzed by Lewis acids (HP, BF, etc). [Pg.268]

Acetalation. As polyhydroxy compounds, carbohydrates react with aldehydes and ketones to form cycHc acetals (1,13). Examples are the reaction of D-glucose with acetone and a protic or Lewis acid catalyst to form l,2 5,6-di-0-isoprop5lidene-a-D-glucofuranose [582-52-5] and its reaction with benzaldehyde to form 4,6-0-benzyhdene-D-glucopyranose [25152-90-3]. The 4,6-0-(l-carboxyethyhdine) group (related to pymvic acid) occurs naturally in some polysaccharides. [Pg.481]

The [ 2 + 4]-cycloaddition reaction of aldehydes and ketones with 1,3-dienes is a well-established synthetic procedure for the preparation of dihydropyrans which are attractive substrates for the synthesis of carbohydrates and other natural products [2]. Carbonyl compounds are usually of limited reactivity in cycloaddition reactions with dienes, because only electron-deficient carbonyl groups, as in glyoxy-lates, chloral, ketomalonate, 1,2,3-triketones, and related compounds, react with dienes which have electron-donating groups. The use of Lewis acids as catalysts for cycloaddition reactions of carbonyl compounds has, however, led to a new era for this class of reactions in synthetic organic chemistry. In particular, the application of chiral Lewis acid catalysts has provided new opportunities for enantioselec-tive cycloadditions of carbonyl compounds. [Pg.156]

The most important method for the synthesis of aromatic ketones 3 is the Friedel-Crafts acylation. An aromatic substrate 1 is treated with an acyl chloride 2 in the presence of a Lewis-acid catalyst, to yield an acylated aromatic compound. Closely related reactions are methods for the formylation, as well as an alkylation procedure for aromatic compounds, which is also named after Friedel and Crafts. [Pg.116]

While the Friedel-Crafts acylation is a general method for the preparation of aryl ketones, and of wide scope, there is no equivalently versatile reaction for the preparation of aryl aldehydes. There are various formylation procedures known, each of limited scope. In addition to the reactions outlined above, there is the Vdsmeier reaction, the Reimer-Tiemann reaction, and the Rieche formylation reaction The latter is the reaction of aromatic compounds with 1,1-dichloromethyl ether as formylating agent in the presence of a Lewis acid catalyst. This procedure has recently gained much importance. [Pg.135]

The Pictet-Spengler reaction has mainly been investigated as a potential source of polycyclic heterocycles for combinatorial apphcations or in natural product synthesis [149]. Tryptophan or differently substituted tryptamines are the preferred substrates in a cyclocondensation that involves also aldehydes or activated ketones in the presence of an acid catalyst. Several versions of microwave-assisted Pictet-Spengler reactions have been reported in the hter-ature. Microwave irradiation allowed the use of mild Lewis acid catalysts such as Sc(OTf)3 in the reaction of tryptophan methyl esters 234 with different substituted aldehydes (aliphatic or aromatic) [150]. Under these conditions the reaction was carried out in a one-pot process without initial formation of the imine (Scheme 86). [Pg.256]

Reactions with Acylium Ions. Alkenes react with acyl halides or acid anhydrides in the presence of a Lewis acid catalyst to give (3,y-unsaturated ketones. The reactions generally work better with cyclic than acyclic alkenes. [Pg.881]

Si. rra(pentafluorophenyl)boron was found to be an efficient, air-stable, and water-tolerant Lewis-acid catalyst for the allylation reaction of allylsilanes with aldehydes.167 Sc(OTf)3-catalyzed allylations of hydrates of a-keto aldehydes, glyoxylates and activated aromatic aldehydes with allyltrimethylsilane in H2O-CH3CN were examined. a-Keto and a-ester homoallylic alcohols and aromatic homoallylic alcohols were obtained in good to excellent yields.168 Allylation reactions of carbonyl compounds such as aldehydes and reactive ketones using allyltrimethoxysilane in aqueous media proceeded smoothly in the presence of 5 mol% of a CdF2-terpyridine complex (Eq. 8.71).169... [Pg.253]

The third cycloaddition substrate explored the feasibility of a vinyl nitro functionality as an activated dipolarophile (98, Scheme 1.9c). Preparation of nitroalkene oxidopyridinium betaine 98 began with silylenol ether 92, which was treated with methoxydioxolane in the presence of Lewis acid catalyst, TrC104, to afford keto dioxolane 93 in 58 % yield [47]. Ketone 93 then underwent a-nitration by treatment with /-BuONCL and KOt-Bu to provide nitro ketone 84 (91 %), which was then converted to the nitroalkene functionality via reduction under Luche conditions to... [Pg.12]

Examples of the use of heterodienophiles under the action of microwave irradiation are not common. Soufiaoui [84] and Garrigues [37] used carbonyl compounds as die-nophiles. The first example employed solvent-free conditions the second is an example of the use of graphite as a susceptor. Cycloaddition of a carbonyl compound provided a 5,6-dihydro-2H-pyran derivative. These types of reaction proceed poorly with aliphatic and aromatic aldehydes and ketones unless highly reactive dienes and/or Lewis acid catalysts are used. Reaction of 2,3-dimethyl-l,3-butadiene (31) with ethyl glyoxylate (112) occurred in 75% yield in 20 min under the action of microwave irradiation. When conventional heating is used it is necessary to heat the mixture at 150 °C for 4 h in a sealed tube to obtain a satisfactory yield (Scheme 9.33). [Pg.315]

Several other miscellaneous heterogeneously catalyzed reactions have been performed in the liquid phase. Hexane was successfully oxyfunctionalized with aqueous hydrogen peroxide by use of the zeolite TS-1 catalyst [50] and microwave-promoted acetalization of a number of aldehydes and ketones with ethylene glycol proceeded readily (2 min) in the presence both of heterogeneous (acidic alumina) and homogeneous (PTSA, Lewis acids) catalysts [51], Scheme 10.7. [Pg.354]

Tellurium tetrachloride is an efficient Lewis acid catalyst for the thioacetaUzation of aldehydes and thioketaUzation of aliphatic ketones. ... [Pg.338]

By 1989 Mukaiyama had already explored the behaviour of phosphonium salts as Lewis acid catalysts. It was possible to show that the aldol-type reaction of aldehydes or acetals with several nucleophiles and the Michael reaction of a,j3-unsatu-rated ketones or acetals with silyl nucleophiles gave the products in good yields with a phosphonium salt catalyst [116]. In addition, the same group applied bisphosphonium salts as shown in Scheme 45 in the synthesis of ]3-aminoesters [117]. High yields up to 98% were obtained in the reaction of A-benzylideneaniline and the ketene silyl acetal of methyl isobutyrate. Various analogues of the reaction parteers gave similar results. The bisphosphonium salt was found to be superior to Lewis acids like TiCl and SnCl, which are deactivated by the resulting amines. [Pg.370]

The reactions proceeded efficiently under mild conditions in short time. The silyl enol ethers reacted with the activated acetals or aldehydes at -78 °C to give predominant erythro- or threo-products [136, 137] respectively. In the same manner, the aldol reaction of thioacetals, catalyzed by an equimolar amount of catalyst, resulted in <-ketosulfides [139] with high diastereoselectivity. In the course of this investigation, the interaction of silyl enol ethers with a,]3-unsaturated ketones, promoted by the trityl perchlorate, was shown to proceed regioselec-tively through 1,2- [141] or 1,4-addition [138]. The application of the trityl salt as a Lewis acid catalyst was spread to the synthesis of ]3-aminoesters [142] from the ketene silyl acetals and imines resulting in high stereoselective outcome. [Pg.373]

A variety of other reaction conditions have been examined for acylation of alkenes by acyl chlorides. With the use of Lewis acid catalysts, reaction typically occurs to give both enones and jS-halo ketones.7 The latter reaction has been most synthetically useful in intramolecular cyclizations. The following reactions are illustrative. [Pg.598]

The potential activation of different Lewis acid catalysts and their load effect when used in combination with this solvent were explored, in order to determine the improvement of rates and selectivity to the endo and exo isomers. The list of Lewis acid catalysts included Li(OTf), Li(NTf2), Znl2, AICI3, BF3, HOTf, HNTf2, Ce(0Tf)4 5H20, Y(OTf)3, Sc(OTf)3, Sc(NTf2) and a blank without any Lewis acid. The reaction conditions were as follows 2.2 mmol of cyclopentadiene + 2.0 mmol of dienophile + 0.2 mol% of catalyst in 2 mL [hmim][BF4]. When no catalyst was added, the two ketones (R =Me-C=0 R2 = R3 = H and Ri=Et-C=0 R2 = R3 = H) showed modest activity ( 50% in 1 h) with endojexo selectivity = 85/15. Whereas acrolein showed modest activity (59% conversion in 2 h), methacrolein and crotonaldehyde were inert without a Lewis acid catalyst. Acrylonitrile and methyl acrylate underwent low conversions in 1 h (16-17%) whereas, N-phenylmaleimide, maleic anhydride and 2-methyl-1,4-benzoquinone showed complete reaction in 5 min with high endo isomer yields. [Pg.162]

In subsequent studies, methyl vinyl ketone (2.0 mmole) was chosen as the dienophile so as to determine the combined effect of the ionic liquid (2 mL) and the Lewis acids (0.2 and 0.5 wt%) upon the yield and selectivity. Without the Lewis acid catalyst, this system demonstrated a 52% conversion of the cyclopentadiene (2.2 mmol) in 1 h with the endojexo selectivity being 85/15. The cerium triflate-catalyzed reaction was quantitative in 5 min and the endo. exo selectivity was very good for this experiment as well (94 6, endo. exo). Also with the scandium or yttrium salts tested, reactions came to completion in a short time with high stereo-selection. Cerium, scandium and yttrium triflates are strong Lewis acids known to be quite effective catalysts in the cycloadditions of cyclopentadiene with acyclic aldehydes, ketones, quinones and cycloalkenones. These compounds are expected to act as strong Lewis acids because of their hard character and the electron-withdrawing triflate group. On the other hand, reaction times of 1 hour were required for... [Pg.162]

Fischer indole synthesis Cyclization of arylhydrazones by heating with an acid or Lewis acid catalyst yields an indole system. The most commonly used catalyst is ZnCl2- The disadvantage of this reaction is that unsymmetrical ketones give mixtures of indoles if R also has an a-methylene group. [Pg.169]

Aryltetralones. Cyclopropyl ketones such as 1 cyclize to 1-aryltetralones 2 and 3 in the presence of Lewis acid catalysts such as SnCl4, CFjCOOll, and BF, elherate. [Pg.370]

A considerable difference between Friedel-Crafts alkylation and acylation is the amount of the Lewis acid necessary to induce the reaction. Friedel-Crafts alkylation requires the use of only catalytic amounts of the catalyst. Lewis acids, however, form complexes with the aromatic ketones, the products in Friedel-Crafts acylations, and the catalyst is thus continuously removed from the system as the reaction proceeds. To achieve complete conversion, therefore, it is necessary to use an equimolar amount of Lewis acid catalyst when the acylating agent is an acyl halide. Optimum yields can be obtained using a 1.1 molar excess of the catalyst. With... [Pg.409]

An economical, biogenetically patterned, cyclization ofenamine ketones led to indolizidine alkaloids. The enamine (196) underwent cyclization and dehydration in methanol. Reduction to O-benzylipalbidine (191b) and debenzylation afforded ( )-ipalbidine (191a) (79-JCR(M)0413). Titanium(VI) chloride and silicon(IV) chloride may be the best Lewis acid catalysts for reactions of this type (81TL2127). [Pg.472]


See other pages where Lewis acid catalysts ketones is mentioned: [Pg.107]    [Pg.119]    [Pg.870]    [Pg.37]    [Pg.1221]    [Pg.1242]    [Pg.110]    [Pg.75]    [Pg.78]    [Pg.463]    [Pg.243]    [Pg.303]    [Pg.461]    [Pg.469]    [Pg.941]    [Pg.870]    [Pg.455]    [Pg.455]   
See also in sourсe #XX -- [ Pg.1408 ]




SEARCH



Ketone catalysts

Lewis catalysts

© 2024 chempedia.info