Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Label for

Two of the most important functions in the application of neutron scattering are the use of deuterium labelling for the study of molecular confomiation in the bulk state and the use of deuterium solvent in polymer solutions. In the following, we will consider several different applications of die general fomuda to deuteration. [Pg.1412]

The first line gen (route section) tells the system that we want to define our own function. The lines 2, 3, and 4 are a blank line, program label (for human readers), and a blank line. The next line that is read by the system is 0 2, specifying that the ground state of H has a 0 charge and is a spin doublet (one unpaired election). The next line, h, specifies hydrogen, followed by a blank. [Pg.244]

The spacing of the lines is such that each monomer along the base serves as a label for a row of diamonds. [Pg.434]

Also given in Figure 6.24 are the parity labels, + or —, and the alternative e or/ labels for each rotational level. The general selection rules involving these properties are ... [Pg.175]

Henna can be used only to color hair with the exception of eyelashes, eyebrows, or generally ia the area of the eye. The label for products containing henna must caution the consumer not to use ia the area of the eye or on cut or abraded scalp. [Pg.458]

The ICC classifies all three pentanes as flammable Hquids and requires that they be affixed with a red label for shipping. Because of their high vapor pressures, n- and isopentane are transported in heavy-walled dmms and neo-pentanes are transported in cylinders (see Packaging containers and INDUSTRIAL MATERIALS). [Pg.404]

Fig. 5. Ionospheric electron density vs height above the earth at the extremes (A = minimum, B = maximum) of the 11-yr sunspot cycle during (a) day and (b) night (54). D, E, F, F, and F2 are conventional labels for the indicated regions of the ionosphere. Fig. 5. Ionospheric electron density vs height above the earth at the extremes (A = minimum, B = maximum) of the 11-yr sunspot cycle during (a) day and (b) night (54). D, E, F, F, and F2 are conventional labels for the indicated regions of the ionosphere.
Shipment and Storage. Liquid sulfur dioxide is commonly shipped in North America using 55- and 90-t tank cars, 20-ton tank tmcks, 1-ton cylinders, and 150-lb cylinders. Cylinders made of specified steel are affixed with the green label for nonflammable gases. The DOT classification is Poison Gas, Inhalation Ha2ard. Purchasers of tank-car quantities are required to have adequate storage faciUties for prompt transfer. [Pg.147]

Fungicides. Formalin as Paracide-F is the only registered fungicide and is labeled for use on eggs of trout, salmon, and esocids at 1,000 —2,000 mg/L for 15 min (9—11). DeHvery apparatus has been developed to reduce human exposure to formalin. Fish culturists in the Pacific Northwest have... [Pg.321]

Sample Handling System. Venous or capillary blood, urine, and cerebrospinal fluid are specimens routinely used in medical diagnostic testing. Of these biological fluids, the use of venous blood is by far the most prevalent. Collection devices such as syringes and partial vacuum test tubes, eg, Vacutainer, are used to draw ten milliliters or less of venous blood. At collection time, the test tubes are carefully labeled for later identification. [Pg.395]

Labeling. The typical labeling classification for frit may be followed by precautionary labeling for formulations containing lead oxide, free siUca, or cadmium oxide. Special labeling for shipment to specific locaUties may also be necessary to meet local and state requirements. [Pg.218]

A good example of an affinity label for creatine kinase has been presented (35). This enzyme catalyzes the reversible transfer of a phosphoryl group from adenosine triphosphate [56-65-5] (17) to creatine [57-00-1] (18), leading to adenosine diphosphate [7584-99-8] (19) and phosphocreatine [67-07-2]... [Pg.324]

United Nations UN Packages and labeling for products moving among member nations. [Pg.1949]

Packages and labeling for alcohols, tobacco, firearms, and explosives. [Pg.1949]

Packaging and labeling for all hazardous materials shipped in interstate commerce. [Pg.1949]

Materials which can be carried and the packaging and labeling for them. [Pg.1949]

Packaging and labeling for hazardous and uouhazardous materials and products which they will carry. [Pg.1949]

Fig. 11.4. Microstructures during the slow cooling of a hypoeutectoid steel from the hot working temperature. A3 is the standard labelling for the temperature at which or first appears, and A, is standard for the eutectoid temperature. Hypoeutectoid means that the carbon content is below that of a eutectoid steel (in the same sense that hypodermic means "under the skin" ). Fig. 11.4. Microstructures during the slow cooling of a hypoeutectoid steel from the hot working temperature. A3 is the standard labelling for the temperature at which or first appears, and A, is standard for the eutectoid temperature. Hypoeutectoid means that the carbon content is below that of a eutectoid steel (in the same sense that hypodermic means "under the skin" ).
Utilization of resonance effects can facilitate unenhanced Raman measurement of surfaces and make the technique more versatile. For instance, a fluorescein derivative and another dye were used as resonantly Raman scattering labels for hydroxyl and carbonyl groups on glassy carbon surfaces. The labels were covalently bonded to the surface, their fluorescence was quenched by the carbon surface, and their resonance Raman spectra could be observed at surface coverages of approximately 1%. These labels enabled assess to changes in surface coverage by C-OH and C=0 with acidic or alkaline pretreatment [4.293]. [Pg.260]

Labels for soft drink bottles, shampoo bottles, plastic food containers and the like, require high adhesion to materials like polyester and polyolefins. Once applied, the adhesive may have to withstand repeated flexing, freezing, water and other fluid spillage, while maintaining aesthetic appearance. [Pg.522]

Several approaches have been disclosed to make release coatings that can be printed with ink jet or laser jet printers (e.g., to make linerless labels). For example, Khatib and Langan [164] disclose a blend of two different acrylate functional silicones, one with a high level of acrylate functionality to provide the printability and one with a low level of acrylate functionality to provide easy PSA release. Lievre and Mirou [165] describe an aqueous blend of a crosslinkable silicone and poly(vinyl alcohol-vinyl acetate) resins while Shipston and Rice describe a blend of acrylic resin and a surfactant [166]. [Pg.565]


See other pages where Label for is mentioned: [Pg.1439]    [Pg.133]    [Pg.258]    [Pg.365]    [Pg.76]    [Pg.89]    [Pg.96]    [Pg.208]    [Pg.235]    [Pg.259]    [Pg.118]    [Pg.445]    [Pg.318]    [Pg.172]    [Pg.145]    [Pg.84]    [Pg.122]    [Pg.537]    [Pg.319]    [Pg.428]    [Pg.509]    [Pg.1942]    [Pg.1949]    [Pg.377]    [Pg.18]    [Pg.646]    [Pg.225]    [Pg.447]    [Pg.447]   
See also in sourсe #XX -- [ Pg.47 ]




SEARCH



Adhesives for tapes and labels

Anion as a Prosthetic Group for Labelling Proteins with Astatine

Canonical Labeling for Diamantane

Canonical Labels for Adamantane

Canonical Labels for Graphs

Chemical Labeling Methods for Protein Quantification

Container labelling for

Doubly labelling single protein molecules for FRET studies

Further reagents for the labelling of amino compounds

Group labels for

Isotope Tagging and Labeling Techniques for Protein Quantification

Label for the Drug

Labeled Water Technique for Determining Energy Expenditure

Labeling for shipment

Labeling patterns for

Labeling requirements for

Labeling systems for

Labelling of Devices for Investigational Use

Labelling of chemicals for supply and use

Labels for Antibodies

Labels for products

Metabolic Labeling for Protein Quantification

New method for label-free electrical DNA detection

Plasmon Resonant Particles and Other Nanoparticles as Labels for Biomedical Applications

Preparation of Mono-Disperse Gold Suspensions for Protein Labeling

Radioactive Label for the Antigen

Reference Intake Figures for Food Labeling

Rules for Multiple Label Experiments

Shell Semiconductor Nanocrystals for Biological Labeling

Spin labels for

Stereospecific C-H Bond Activation for Rapid Deuterium Labeling

The Need for Labeling

Use of Multiple Antibodies for Labeling Antigens

Use of Multiple Antibodies for Labeling p53 Antigen

Use of Thiolation Reagents for Direct Labeling to Sulfhydryl Groups

© 2024 chempedia.info