Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Ketones nucleophilic substitution

The Peterson reaction has two more advantages over the Wittig reaction 1. it is sometimes less vulnerable to sterical hindrance, and 2. groups, which are susceptible to nucleophilic substitution, are not attacked by silylated carbanions. The introduction of a methylene group into a sterically hindered ketone (R.K. Boeckman, Jr., 1973) and the syntheses of olefins with sulfur, selenium, silicon, or tin substituents (D. Seebach, 1973 B.T. Grdbel, 1974, 1977) illustrate useful applications. The reaction is, however, more limited and time consuming than the Wittig reaction, since metallated silicon derivatives are difficult to synthesize and their reactions are rarely stereoselective (T.H. Chan, 1974 ... [Pg.33]

Nitriles contain the —C=N functional group We have already discussed the two mam procedures by which they are prepared namely the nucleophilic substitution of alkyl halides by cyanide and the conversion of aldehydes and ketones to cyanohydrins Table 20 6 reviews aspects of these reactions Neither of the reactions m Table 20 6 is suitable for aryl nitriles (ArC=N) these compounds are readily prepared by a reaction to be dis cussed m Chapter 22... [Pg.867]

Section 20 18 Nitnles are prepared by nucleophilic substitution (8 2) of alkyl halides with cyanide ion by converting aldehydes or ketones to cyanohydrins (Table 20 6) or by dehydration of amides... [Pg.877]

An a ,/3-epoxycarboxylic ester (also called glycidic ester) 3 is formed upon reaction of a a-halo ester 2 with an aldehyde or ketone 1 in the presence of a base such as sodium ethoxide or sodium amide. Mechanistically it is a Knoevenagel-type reaction of the aldehyde or ketone 1 with the deprotonated a-halo ester to the a-halo alkoxide 4, followed by an intramolecular nucleophilic substitution reaction to give the epoxide 3 ... [Pg.81]

Conversion of Esters into Alcohols Grignard Reaction Esters and lactones react with 2 equivalents of a Grignard reagent to yield a tertiary alcohol in which two of the substituents are identical (Section 17.5). The reaction occurs by the usual nucleophilic substitution mechanism to give an intermediate ketone, which reacts further with the Grignard reagent to yield a tertiary alcohol. [Pg.813]

Further lowering the dielectric constants has been achieved by preparing highly fluorinated polyethers without any sulfone, ketone, or other polarizable groups.239 241 Typically, the /jara-lluorinc atoms on highly fluorinated aromatic compounds, such as hexafluorobenzene and decafluorobiphenyl, are activated and thus can go through aromatic nucleophilic substitution with HFBPA under typical reaction conditions (Scheme 6.31).217... [Pg.362]

The most plausible mechanism for the interconversion of la and Ih is shown in Scheme 2. Similar mechanism has been put forward for epimerization of a-substituted ketones under basic conditions and for the equilibration via an enolate prior to nucleophilic substitution was observed by Numazawa et al. (ref. 13). The same mechanism seems to operate in the reduction of some steroid a-haloketones (ref. 14) or tra/ty-3-chloroflavanone (ref. 15) with sodium borohydride where an inversion of configuration takes place at the a carbon parallel to the reduction of the... [Pg.275]

Reactivity factors in additions to carbon-hetero multiple bonds are similar to those for the tetrahedral mechanism of nucleophilic substitution. If A and/or B are electron-donating groups, rates are decreased. Electron-attracting substituents increase rates. This means that aldehydes are more reactive than ketones. Aryl groups are somewhat deactivating compared to alkyl, because of resonance that stabilizes the substrate molecule but is lost on going to the intermediate ... [Pg.1174]

In the presence of a strong base, the ot carbon of a carboxylic ester can condense with the carbonyl carbon of an aldehyde or ketone to give a P-hydroxy ester, which may or may not be dehydrated to the a,P-unsaturated ester. This reaction is sometimes called the Claisen reaction,an unfortunate usage since that name is more firmly connected to 10-118. In a modem example of how the reaction is used, addition of tert-butyl acetate to LDA in hexane at -78°C gives the lithium salt of ferf-butyl acetate, " (12-21) an enolate anion. Subsequent reaction a ketone provides a simple rapid alternative to the Reformatsky reaction (16-31) as a means of preparing P-hydroxy erf-butyl esters. It is also possible for the a carbon of an aldehyde or ketone to add to the carbonyl carbon of a carboxylic ester, but this is a different reaction (10-119) involving nucleophilic substitution and not addition to a C=0 bond. It can, however, be a side reaction if the aldehyde or ketone has an a hydrogen. [Pg.1224]

CO 1 0 c 1 X r Nucleophilic substitution and conjugate addition to unsaturated ketones ketones from acyl chlorides b,c... [Pg.678]

CH3)3CO—Cu—R] Li Nucleophilic substitution and conjugate addition to ra,p-unsatu rated ketones b... [Pg.678]

The water-soluble calix[n]arenes 6.3 (n = 4, 6 and 8) containing trimethylammonium groups act as efficient inverse phase-transfer catalysts in the nucleophilic substitution reaction of alkyl and arylalkyl halides with nucleophiles in water (Eq. 6.19).40 In the presence of various surfactants (cationic, zwitterionic and anionic), the reactions of different halides and ketones show that the amount of ketone alkylation is much higher and that the reactions are faster in the presence than in the absence of surfactant aggregates.41 The hydrolysis of the halide is minimized in the presence of cationic or zwitterionic surfactants. [Pg.179]

The use of alkyl esters in place of ketones resulted in the formation of alkoxypyrimidines 33 which could be converted in high yields, via selective sequential nucleophilic substitutions, into amino dialkoxy and trialkoxy pyrimidines 34 <06EJO3332>. [Pg.393]

In reactions with azides, ketones are directly converted to 5-hydroxytriazolines. Ketone enolate 247, generated by treatment of norbornanone 246 with LDA at 0°C, adds readily to azides to provide hydroxytriazolines 248 in 67-93% yield. Interestingly, l-azido-3-iodopropane subjected to the reaction with enolate 247 gives tetracyclic triazoline derivative 251 in 94% yield. The reaction starts from an electrophilic attack of the azide on the ketone a-carbon atom. The following nucleophilic attack on the carbonyl group in intermediate 249 results in triazoline 250. The process is completed by nucleophilic substitution of the iodine atom to form the tetrahydrooxazine ring of product 251 (Scheme 35) <2004JOC1720>. [Pg.35]

Compound 874, as a representative of derivatives with an electron-withdrawing substituent at C-[1 of the vinyl group, is easily prepared by elimination of one benzotriazole from 2,2-/fo(benzotriazol-l-yl)ethyl methyl ketone 873. The stereoselective elimination catalyzed by NaOH gives exclusively the (E) isomer of derivative 874. Addition of nucleophiles to the double bond of vinyl ketone 874 followed by elimination of benzotriazole leads to a,P unsaturated ketones 875. Amines used as nucleophiles do not need any catalysis, but reactions with carbon and sulfur nucleophiles require addition of a base. The total effect is nucleophilic substitution of the benzotriazolyl group at the i-carbon of orji-iinsaturatcd ketone (Scheme 142) <1996SC3773>. [Pg.99]

The most characteristic and useful reaction is the dimerization with incorporation of certain nucleophiles. It is well-known that simple olefins coordinated by Pd2+ compounds undergo nucleophilic substitutions [Eq. (9)] or addition reactions [Eq. (10)] (16, 17). Water, alcohols, and carboxylic acids are typical nucleophiles which attack olefins to form aldehydes, ketones, vinyl ethers, and vinyl esters. [Pg.145]

Cyanohydrin diethyl phosphates 87, easily accessible from propargyl aldehydes or ketones of type 86, reacted with lithium dialkylcuprates or similar reagents via an Sn2 process to give cyanoallenes in moderate to good yields [135]. The transformations 80 —> 81 and 84 —> 85 are only formally also SN2 reactions. Thus, plausible catalytic cycles, which include different short-lived palladium intermediates, have been postulated to explain these nucleophilic substitution reactions [127, 134],... [Pg.370]

The attack of the nucleophile on the acceptor-substituted allene usually happens at the central sp-hybridized carbon atom. This holds true also if no nucleophilic addition but a nucleophilic substitution in terms of an SN2 reaction such as 181 — 182 occurs (Scheme 7.30) [245]. The addition of ethanol to the allene 183 is an exception [157]. In this case, the allene not only bears an acceptor but shows also the substructure of a vinyl ether. A change in the regioselectivity of the addition of nucleophilic compounds NuH to allenic esters can be effected by temporary introduction of a triphenylphosphonium group [246]. For instance, the ester 185 yields the phos-phonium salt 186, which may be converted further to the ether 187. Evidently, the triphenylphosphonium group induces an electrophilic character at the terminal carbon atom of 186 and this is used to produce 187, which is formally an abnormal product of the addition of methanol to the allene 185. This method of umpolung is also applicable to nucleophilic addition reactions to allenyl ketones in a modified procedure [246, 247]. [Pg.383]

Oxidation is the first step for producing molecules with a very wide range of functional groups because oxygenated compounds are precursors to many other products. For example, alcohols may be converted to ethers, esters, alkenes, and, via nucleophilic substitution, to halogenated or amine products. Ketones and aldehydes may be used in condensation reactions to form new C-C double bonds, epoxides may be ring opened to form diols and polymers, and, finally, carboxylic acids are routinely converted to esters, amides, acid chlorides and acid anhydrides. Oxidation reactions are some of the largest scale industrial processes in synthetic chemistry, and the production of alcohols, ketones, aldehydes, epoxides and carboxylic acids is performed on a mammoth scale. For example, world production of ethylene oxide is estimated at 58 million tonnes, 2 million tonnes of adipic acid are made, mainly as a precursor in the synthesis of nylons, and 8 million tonnes of terephthalic acid are produced each year, mainly for the production of polyethylene terephthalate) [1]. [Pg.181]

Thioetherification of PECH is feasibly performed in DA-solvents as already described in the patent (20J. For example, the highest substitution was obtained by the reaction of P(ECH-EO)(1 1 copolymer of epichloro-hydrin and ethylene oxide) and equimolar thiophenoxide in HMPA at 100°C for 10 h as DS 83% for sodium and 93% for potassium salts. The DS in our nucleophilic substitution was estimated by the elemental analysis as well as the titration of liberated chloride ion with mercuric nitrate (21). In the latter method, reacted medium was pretreated with hydrogen peroxide when the reductive nucleophiles which can react with mercuric ion were used. As described before for PVC, thiolation was also achieved conveniently with iso-thiuronium salt followed by alkaline hydrolysis without the direct use of ill-smelling thiolate. The thiolated PECH obtained are rubbery solids, soluble in toluene, methylene chloride, ethyl methyl ketone and DMF and insoluble in water, acetone, dioxane and methanol. [Pg.52]

In an extension of the procedure, thiols react with gem-dihaloalkanes (Table 4.4) to produce thioacetals [ 10,20-23] and the reaction can be employed in the Corey-Seebach synthesis of aldehydes and ketones (see ref. 24 and references cited therein), gem-Dichlorocyclopiopanes having an electron-withdrawing group at the 2-position react with thiols to produce the thioacetals [25]. In the corresponding reaction of the thiols with biomochloromethane exclusive nucleophilic substitution of the bromo group by the thiolate anion occurs to yield the chloromethyl thioethers [13, 14] (Table 4.5). [Pg.123]

Miller et al. [87,88] have described the synthesis of hyperbranched aromatic poly(ether-ketone)s based on monomers containing one phenolic group and two fluorides which were activated towards nucleophilic substitution by neighboring groups. The molecular weight and polydispersity of the formed po-ly(ether-ketone)s could be controlled by reaction conditions such as monomer concentration and temperature. The formed polymers had high solubility in common solvents such as THF. [Pg.16]

OH activation for nucleophilic substitution Aldehyde or ketone + NH3+ X to give chiral amine... [Pg.66]


See other pages where Ketones nucleophilic substitution is mentioned: [Pg.209]    [Pg.128]    [Pg.202]    [Pg.686]    [Pg.344]    [Pg.783]    [Pg.1173]    [Pg.1189]    [Pg.1230]    [Pg.1403]    [Pg.97]    [Pg.95]    [Pg.93]    [Pg.72]    [Pg.96]    [Pg.176]    [Pg.72]    [Pg.463]    [Pg.240]    [Pg.74]   


SEARCH



Halo ketones nucleophilic substitution

Ketone substituted

Ketones nucleophiles

© 2024 chempedia.info