Isothiazole oxidation

In contrast to thiazoles, certain isothiazoles and benzisothiazoles have been directly oxidized to sulfoxides and sulfones. 4,5-Diphenyl-l,2,3-thiadiazole is converted by peracid into the trioxide (146). Although 1,2,5-thiadiazole 1,1-dioxides are known, they cannot be prepared in good yield by direct oxidation, which usually gives sulfate ion analogous to the results obtained with 1,2,4- and 1,3,4-thiadiazoles (68AHC 9)107). 

Numerous examples of N—S bond formation using oxidative conditions have been described in the literature. A convenient synthesis of isothiazoles involves the direct oxidation of -y-iminothiols and numerous variations have been studied (see Chapter 4.17), The oxidation of the amidine (248) to give the 3-aminoisothiazole (249) illustrates the reaction scheme (65AHC(4)107, 72AHC(14)1), which has been extended to the synthetically useful 5-amino-4-cyano-3-methylisothiazole (251) obtained by oxidation of (250) with hydrogen peroxide (75JHC883). 

The exoeyelie earbonyl group of isothiazol-3-ones absorbs in the region 1610-1660 em <7lJHC59l). 2-Methylisothiazol-3-one itself has the C=0 and C=C bands at 1660 and 1629 em respeetively, in CCI4 solution <64TL1477). The low earbonyl frequeney is due in part to eontributions from the resonanee form (20b). The earbonyl frequeney inereases in sulfoxides (1660-1730 em ) and 1,1-dioxides (1690-1740 em ) where sueh forms are not favourable. Sulfoxides (1060-1190 em ) and sulfones (1330-1360 and 1150-1190 em ) absorb in the regions expeeted (e.g. saeeharin, 1353 and 1162 em ), but resonanee forms related to (13) eause a reduetion of the frequeney of the asymmetrie SO2 vibration to near 1280 em (70CB3166). A similar situation arises in 3-amino-1,2-benzisothiazole 1-oxides. 

Few isothiazoles undergo simple cycloaddition reactions. 4-Nitroisothiazoles add to alkynes (see Section 4.17.7.4). With 5-thiones (84) and dimethyl acetylenedicarboxylate, addition to both sulfur atoms leads to 1,3-dithioles (85) (77SST(4)339, 80H(14)785, 81H(16)156, 81H(16)595). Isothiazol-3-one 1-oxide and the corresponding 1,1-dioxide give normal adducts with cyclopentadiene and anthracene (80MI41700), and saccharin forms simple 1 1 or 1 2 adducts with dimethyl acetylenedicarboxylate (72IJC(B)881). 

Methyl isothiazole-4-acetate is nitrosated by pentyl nitrite, and the oximino ester formed can be hydrolyzed to the a-keto ester (78GEP2745246). Secondary alcohols (94) can be oxidized to the ketones (72GEP2223648). 

One of the best methods of synthesis of isothiazoles is by direct oxidation of y- iminothiols (169) or their tautomers. The reaction is capable of many ramifications and is represented by the general equation shown in Scheme 27. The substituents represent a wide range of groups. Thus, iminothioamides (169 R = NH2) are oxidized to give 3-alkyl-5-aminoisothiazoles (170 = NH2), amidines (169 R = NH2) produce 3-amino compounds,... 

Chloro-a,/3-unsaturated aldehydes condense with ammonium thiocyanate to give isothiazoles (76EGP122249). 2,3-Diphenylcyclopropenone reacts with iV-sulfinyl-cyclohexylamine in the presence of nickel tetracarbonyl to give the isothiazolin-3-one 1-oxide (197) (79SST(5)345). Cholesteryl acetate reacts with trithiazyl trichloride in pyridine to give the isothiazolo steroid (198) (77JCS(P1)916). 

Isoxazole compounds can be converted into the corresponding isothiazoles by successive catalytic hydrogenation, sulfuration with phosphorus pentasulfide and oxidation with chloranil (72AHC(14)l, 75SST(3)541). 2,1-Benzisoxazoles give the 2,1-benzisothiazoles directly, by the action of phosphorus pentasulfide in either pyridine or molten imidazole (73SST(2)556, 77SST(4)339). (See also Chapter 4.16 for further discussion of these topics.)... 

Cephalosporin 5-oxides and penicillin 5-oxides (221) can be converted into isothiazol-3-ones (222) by the action of bases. These reactions proceed via an intermediate azetidinonesulfenic acid (223 Scheme 37) (77SST(4)339). Attempts to prepare /3-lactam compounds from isothiazoles have, as yet, been unsuccessful (81X2181). 

Isothiazole itself is best prepared by the reaction between propynal, ammonia and sodium thiosulfate (see Section 4.17.9.3). A wide range of substituted mononuclear isothiazoles can be obtained by oxidative cyclization of y-iminothiols and related compounds (see Section 4.17.9.1.1). Substituents at the 3-position need to be in place before cyclization, but 4-substituents are readily introduced by electrophilic reagents (see Section 4.17.6.3), and 5-substituents via lithiation (see Section 4.17.6.4). 

Coformycin, 2 -deoxy—see Pentostatin Colchicine synthesis, 1, 472 isothiazoles in, 6, 174 Collins reagent as oxidizing agent, 2, 170 Colour... 

There are two series of benzisothiazoles, derived from benz[c]iso-thiazole (2) and benz[d]isothiazole (3), and both, if the benzene ring were suitable weakened, could doubtless be oxidized to isothiazole-dicarboxylic acids. In their first synthesis Adams and Slack... 

The substitution properties of isothiazole are in broad agreement with the electron distribution pattern. Thus, electrophilic substitution occurs predominantly in the 4-position, if this is free, and metalation in the 5-position. The ring appears to be stable to acid, alkali, and mild oxidation and forms a chloroplatinate and an unstable merouriohloride. ... 

Isothiazole-3-carboxylic acid and its 4-bromo derivative have been obtained by oxidation of the corresponding aldehydes with silver oxide. They form acid chlorides, esters, and amides. The amides may be dehydrated to give the corresponding nitriles. ... 

Papers dealing with this topic are exhaustively reviewed in Comprehensive Heterocyclic Chemistry I (84CHEC-I(6)235) and II (96CHEC-II(3)373). Nevertheless, little information is available on the 5-oxides. Recently, the heteroaromaticity of thiazole compared with isothiazole and thiadiazole 5,5-dioxide systems was studied (97MI1). Quantum-chemical calculations and X-ray studies were performed on 3,3 -di[l,3-thiazolidin-4-one] derivatives (95JCC(25)589) studied for their potential biological activity (97FA(52)43). 

Usually, N-sulfinyl compounds (59) behave as thionyl transfer reagents, similar to, but milder than, thionyl chloride. For example, o-diamines with A-sulfinylbenzeneamine (59 R = Ph) afford fused 1,2,5-thiadiazoles, as in Scheme 8a.77 The advantage of using Af-sulfinyl compounds, rather than thionyl chloride itself, is that concomitant chlorinations and oxidations are avoided. This is of particular importance in the synthesis of 2,1-benzisothia-zoles (Section V,B,6). Singerman s reagent, N-sulfinylmethanesulfonamide (60) is especially valuable 78 it was used very successfully in the synthesis of a series of benzobis(isothiazoles).79... 

The 1,3-dipolar cycloaddition of diazoalkanes 276 and nitrile oxides 279 to isothiazole dioxides 275 provides an easy entry into fused bicyclic isothiazole systems 277 and 280, respectively <06JHC1045>. The adducts from 4-bromoisothiazole (R1 = Br) are labile and undergo spontaneous debromination to form the aromatic bicyclic pyrazolo-isothiazoles 278... 

Individual aspects of nitrile oxide cycloaddition reactions were the subjects of some reviews (161 — 164). These aspects are as follows preparation of 5-hetero-substituted 4-methylene-4,5-dihydroisoxazoles by nitrile oxide cycloadditions to properly chosen dipolarophiles and reactivity of these isoxazolines (161), 1,3-dipolar cycloaddition reactions of isothiazol-3(2//)-one 1,1-dioxides, 3-alkoxy- and 3-(dialkylamino)isothiazole 1,1-dioxides with nitrile oxides (162), preparation of 4,5-dihydroisoxazoles via cycloaddition reactions of nitrile oxides with alkenes and subsequent conversion to a, 3-unsaturated ketones (163), and [2 + 3] cycloaddition reactions of nitroalkenes with aromatic nitrile oxides (164). 

Thiophene-1-oxide and 1 -substituted thiophenium salts present reduced aromaticity.144 A variety of aromaticity criteria were used in order to assess which of the 1,1-dioxide isomers of thiophene, thiazole, isothiazole, and thiadiazole was the most delocalized (Scheme 46).145 The relative aromaticity of those molecules is determined by the proximity of the nitrogen atoms to the sulfur, which actually accounts for its ability to participate in a push-pull system with the oxygen atoms of the sulfone moiety. The relative aromaticity decreases in the series isothiazole-1,1-dioxide (97) > thiazole-1,1 -dioxide (98) > thiophene-1-dioxide (99) then, one has the series 1,2,5 -thiadiazole-1,1 -dioxide (100) > 1, 2,4-thiadiaz-ole-1,1-dioxide (101) > 1,2,3-thiadiazole-1,1 -dioxide (102) > 1,3,4-thiadiazole-l,1-dioxide (103) in the order of decreasing aromaticity. As 1,2,5-thiadiazole-1,1-dioxide (100) was not synthesized, the approximations used extrapolations of data obtained for its 3,4-dimethyl-substituted analogue 104 (Scheme 46). 

To further illustrate the diversity of hydrolytic opening reactions, we turn our attention to an isothiazole ring as found in the antipsychotic agent ziprasidone (11.129). This drug is subject to various reactions of oxidation and reduction, but also undergoes hydrolytic cleavage of the C=N bond of the isothiazole ring. Evidence for this reaction was afforded by detection of radioactive metabolite 11.130, a sulfonamide, in the urine of patients dosed... 

In the presence of various metal ions, 2-(fluoroenone)benzothiazoline has been found to rearrange to A-2-mercaptophenylenimine, while a free radical mechanism involving the homolysis of C-S and C-N bonds has been invoked to explain the formation of 3-phenyl-1,2,4-triazole derivatives from the thermal fragmentation and rearrangement of 2-(arylidenehydrazino)-4-(5//)-thiazolone derivatives. The cycloadducts (36) formed from the reaction of 3-diethylamino-4-(4-methoxyphenyl)-5-vinyl-isothiazole 1,1-dioxide (34) with nitric oxides or miinchnones (35) have been found to undergo pyrolytic transformation into a, jS-unsaturated nitriles (38) by way of pyrrole-isothiazoline 1,1-dioxide intermediates (37). 

---