Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Aromaticity, criteria for

Table 17 Comparative aromaticity criteria for isothiazole, thiazole, pyrazole, and isoxazole. Table 17 Comparative aromaticity criteria for isothiazole, thiazole, pyrazole, and isoxazole.
Later in this chapter we 11 explore the criteria for aromaticity in more detail to see how they apply to cyclic polyenes of different ring sizes The next several sections intro duce us to the chemistry of compounds that contain a benzene ring as a structural unit We 11 start with how we name them... [Pg.431]

From among the molecules and ions shown all of which are based on cycloundecapentaene identify those which satisfy the criteria for aromaticity as prescribed by Huckel s rule... [Pg.471]

The rotating-disk contactor (RDC), developed in the Netherlands (158) in 1951, uses the shearing action of a rapidly rotating disk to interdisperse the phases (Eig. 15b). These contactors have been used widely throughout the world, particularly in the petrochemical industry for furfural [98-01-1] and SO2 extraction, propane deasphalting, sulfolane [126-33-0] extraction for separation of aromatics, and caprolactam (qv) [105-60-2] purification. Columns up to 4.27 m in diameter are in service. An extensive study (159) has provided an excellent theoretical framework for scale-up. A design manual has also been compiled (160). Detailed descriptions and design criteria for the RDC may also be found (161). [Pg.76]

Types i and ii are the most important. An essential difference between them is that in type i both tautomers can be aromatic [e.g., pyrid-2-one (16) and 2-hydroxypyridine (17) both satisfy the criteria for aromaticity and have large resonance energies], whereas in type ii at least one tautomer, that corresponding to 3, is nonaromatic [e.g., 3-hydroxyfuran (18) is aromatic, but furan-3-one (19) is not]. In... [Pg.314]

According to the Hiickel criteria for aromaticity, a molecule must be cyclic, conjugated (that is, be nearly planar and have ap orbital on each carbon) and have 4n + 2 tt electrons. Nothing in this definition says that the number of p orbitals and the number of nr elections in those orbitals must be the same. In fact, they can he different. The 4n + 2 rule is broadly applicable to many kinds of molecules and ions, not just to neutral hydrocarbons. For example, both the cydopentadienyl anion and the cycloheptatrienyl cation are aromatic. [Pg.525]

Total additive loadings rarely exceed 1% of the finished resin. The criteria for ignition resistance are based on oxygen index and UL-94 ratings. The mode of action of the flame retardants is reported to be consistent with that of aromatic sulfonates as proposed by Webb (27). [Pg.249]

U.S. Environmental Protection Agency (USEPA). 1980. Ambient Water Quality Criteria for Polynuclear Aromatic Hydrocarbons. U.S. Environ. Protection Agency. Rep. 440/5-80-069. 193 pp. [Pg.1408]

There are two distinct classes of compounds that fit the criteria mentioned above alkene-functionalized chalcone derivatives (Fig. IB) and enone-functionalized chalcone derivatives (Fig. 1C). Within each class, both aromatic and non-aromatic compounds exist. Those compounds functionalized at the alkene include i) 3-membered heterocycles, e.g., epoxide and aziri-dine compounds, ii) 5-membered aromatic derivatives including fused and non-fused compounds, and iii) 6-membered aromatic pyrazine compounds. The enone-functionalized compounds include i) 5-membered aromatics such as pyrazole and isoxazole compounds, ii) 5-membered non-aromatic compounds for example pyrazolines and isoxazolines, and iii) 6-membered non-aromatics where a discussion of heterocyclic and non-heterocyclic compounds will be given for completeness. [Pg.50]

The spectrum was run in 10% methylene chloride in carbon tetrachloride with use of benzoic acid as an internal standard, using the N-CH3 protons of methimazole at 3.566 and the aromatic protons of benzoic acid at 7.5 and 8.136 as criteria for analysis (29). [Pg.364]

Thiophene-1-oxide and 1 -substituted thiophenium salts present reduced aromaticity.144 A variety of aromaticity criteria were used in order to assess which of the 1,1-dioxide isomers of thiophene, thiazole, isothiazole, and thiadiazole was the most delocalized (Scheme 46).145 The relative aromaticity of those molecules is determined by the proximity of the nitrogen atoms to the sulfur, which actually accounts for its ability to participate in a push-pull system with the oxygen atoms of the sulfone moiety. The relative aromaticity decreases in the series isothiazole-1,1-dioxide (97) > thiazole-1,1 -dioxide (98) > thiophene-1-dioxide (99) then, one has the series 1,2,5 -thiadiazole-1,1 -dioxide (100) > 1, 2,4-thiadiaz-ole-1,1-dioxide (101) > 1,2,3-thiadiazole-1,1 -dioxide (102) > 1,3,4-thiadiazole-l,1-dioxide (103) in the order of decreasing aromaticity. As 1,2,5-thiadiazole-1,1-dioxide (100) was not synthesized, the approximations used extrapolations of data obtained for its 3,4-dimethyl-substituted analogue 104 (Scheme 46). [Pg.20]

Nucleophilic substitution is the widely accepted reaction route for the photosubstitution of aromatic nitro compounds. There are three possible mechanisms11,12, namely (i) direct displacement (S/v2Ar ) (equation 9), (ii) electron transfer from the nucleophile to the excited aromatic substrate (SR wlAr ) (equation 10) and (iii) electron transfer from the excited aromatic compound to an appropriate electron acceptor, followed by attack of the nucleophile on the resultant aromatic radical cation (SRi w 1 Ar ) (equation 11). Substituent effects are important criteria for probing the reaction mechanisms. While the SR wlAr mechanism, which requires no substituent activation, is insensitive to substituent effects, both the S/v2Ar and the Sr+n lAr mechanisms show strong and opposite substituent effects. [Pg.753]

Parsley, spinach, French bean, poplar and S. obliquus (but not A. variabilis) conform extensively to the above criteria for reaction at the remote site. There is extensive evidence for cytochrome f reacting at the remote site on plastocyanin. The aromatic residue at 83 would seem to be a prime candidate as lead-in group for electron transfer. Desolvation at the surface around 83, and interaction with an aromatic component on the reaction partner, e.g. the porphyrin ring of cytochrome f, may be important. The exact manner of electron transfer has yet to be confirmed. The distance from the aromatic ring of Tyr83 to the Cu for electron transfer is 12 A. [Pg.220]


See other pages where Aromaticity, criteria for is mentioned: [Pg.58]    [Pg.58]    [Pg.58]    [Pg.35]    [Pg.58]    [Pg.315]    [Pg.58]    [Pg.495]    [Pg.58]    [Pg.58]    [Pg.58]    [Pg.35]    [Pg.58]    [Pg.315]    [Pg.58]    [Pg.495]    [Pg.28]    [Pg.58]    [Pg.40]    [Pg.157]    [Pg.223]    [Pg.26]    [Pg.319]    [Pg.30]    [Pg.430]    [Pg.224]    [Pg.148]    [Pg.153]    [Pg.425]    [Pg.426]    [Pg.11]    [Pg.279]    [Pg.13]    [Pg.19]    [Pg.128]    [Pg.7]    [Pg.319]    [Pg.45]    [Pg.402]    [Pg.778]   
See also in sourсe #XX -- [ Pg.58 ]

See also in sourсe #XX -- [ Pg.6 , Pg.8 ]




SEARCH



Applying the Criteria for Aromaticity

Criteria for Nucleophilic Aromatic Substitution

Electronic Criteria for Aromaticity

HMO Criteria for Aromaticity in Cyclic (pp Systems

Hiickel criteria for aromaticity

Structural Criteria for Aromaticity

The Criteria for Aromaticity—Huckels Rule

The Energy Criterion for Aromaticity

The Two Criteria for Aromaticity

© 2024 chempedia.info