Ionic liquids purity

It is hoped that this section will give the reader a better appreciation of the range of ionic liquids that have already been prepared, as well as a summary of the main techniques involved and the potential pitfalls. While the basic chemistry involved is relatively straightforward, the preparation of ionic liquids of known purity may be less easily achieved, and it is hoped that the ideas given here may be of assistance to the reader. It should also be noted that many of the more widely used ionic liquids are now commercially available from a range of suppliers, including some specializing in the synthesis of ionic liquids [53]. 

Ionic liquid synthesis in a commercial context is in many respects quite different from academic ionic liquid preparation. While, in the commercial scenario, labor-intensive steps add significantly to the price of the product (which, next to quality, is another important criterion for the customer), they can easily be justified in academia to obtain a purer material. In a commercial environment, the desire for absolute quality of the product and the need for a reasonable price have to be reconciled. This is not new, of course. If one looks into the very similar business of phase-transfer catalysts or other ionic modifiers (such as commercially available ammonium salts), one rarely finds absolutely pure materials. Sometimes the active ionic compound is only present in about 85 % purity. However, and this is a crucial point, the product is well specified, the nature of the impurities is known, and the quality of the material is absolutely reproducible from batch to batch. 

From our point of view, this is exactly what commercial ionic liquid production is about. Commercial producers try to make ionic liquids in the highest quality that can be achieved at reasonable cost. For some ionic liquids they can guarantee a purity greater than 99 %, for others perhaps only 95 %. If, however, customers are offered products with stated natures and amounts of impurities, they can then decide what kind of purity grade they need, given that they do have the opportunity to purify the commercial material further themselves. Since trace analysis of impurities in ionic liquids is still a field of ongoing fundamental research, we think that anybody who really needs (or believes that they need) a purity of greater than 99.99 % should synthesize or purify the ionic liquid themselves. Moreover, they may still need to develop the methods to specify this purity. 

Section 3.3. In this section we deal specifically with the electrochemical properties of ionic liquids (electrochemical windows, conductivity, and transport properties) we will discuss the techniques involved in measuring these properties, summarize the relevant literature data, and discuss the effects of ionic liquid components and purity on their electrochemical properties. 

Tables 3.6-1 and 3.6-2 contain electrochemical potential windows for a wide variety of ionic liquids. Only limited information concerning the purity of the ionic liquids listed in Tables 3.6-1 and 3.6-2 was available, so these electrochemical potential windows must be treated with caution, as it is likely that many of the ionic liquids would have had residual halides and water present.

The purity of ionic liquids is a key parameter, especially when they are used as solvents for transition metal complexes (see Section 5.2). The presence of impurities arising from their mode of preparation can change their physical and chemical properties. Even trace amounts of impurities (e.g., Lewis bases, water, chloride anion) can poison the active catalyst, due to its generally low concentration in the solvent. The control of ionic liquid quality is thus of utmost importance. 

As well as viscosity, other factors to be aware of include the purity of the ionic liquids. The presence of residual halide ions in neutral ionic liquids can poison transition metal catalysts, while different levels of proton impurities in chloroalumi-... 

Based on the properties of ionic hquids in high-temperature microwave-enhanced reactions, the authors chose l-butyl-3-methylimidazolium tetraflu-orophosphate ([bmimjPFe) as the suitable ionic liquid (Scheme 23). The addition of 0.15 mmol of [bmimjPFe to a reaction in 2.0 mL of DCF was found to increase the reaction rate dramatically and a set-temperature of 190 °C was reached in a mere 1 min, while the reactions programmed at 190 °C, in the absence of the ionic liquid, reached only 170 °C in 10 min. The reactions were finished in a mere 18-25 min of irradiation time, including the hydrolysis of the sensitive imidoyl chloride moiety with water. The formed bis-lactams were isolated in good yield and purity. 

Glycidyl methacrylate (purity 98 %) was purchased fiom Aldrich. Ionic liquids based on 1-n-ethyl-3-methyliinidazolium (EMIm), l-n-butyl-3-methylimidazolium (BMhn), 1-n-hexyl-3-methylimidaJ5Dlium (HMhn) with dififeent anions such as CT, BF4", PFg wo e prepared according to the procedures reported previously. Copolymerization of glycidyl methacrylate (GMA) and CO2 were carried out in a 50 mL stainless steel autoclave equipped with a... 

The (5 )-selective DKR of alcohols with subtilisin was also possible in ionic liquid at room temperature (Table 14). " In this case, the cymene-ruthenium complex 3 was used as the racemization catalyst. In general, the optical purities of (5 )-esters were lower than those of (R)-esters described in Table 5. 

Neutral ionic liquids such as [AMIM]BF4 and [AMIMJPF function as catalysts for a limited number of reported reactions. The purities of such ionic liquids have been a concern. Because unknown impurities could give misleading results, care needs to be taken in the preparations 153). 

Biphasic systems consisting of ionic liquids and supercritical CO2 showed dramatic enhancement in the operational stability of both free and immobilized Candida antarctica lipase B (CALB) in the catalyzed kinetic resolution of rac- -phenylethanol with vinyl propionate at 10 MPa and temperatures between 120 and 150°C (Scheme 30) 275). Hydrophobic ionic liquids, [EMIM]Tf2N or [BMIM]Tf2N, were shown to be essential for the stability of the enzyme in the biotransformation. Notwithstanding the extreme conditions, both the free and isolated enzymes were able specifically to catalyze the synthesis of (J )-l-phenylethyl propionate. The maximum enantiomeric excess needed for satisfactory product purity (ee >99.9%) was maintained. The (S)-l-phenylethanol reactant was not esterified. The authors suggested that the ionic liquids provide protection against enzyme denaturation by CO2 and heat. When the free enzyme was used, [EMIM]Tf2N appeared to be the best ionic liquid to protect the enzyme, which... 

---