Liquid-membrane ion-selective electrodes

See also Extraction Solvent Extraction Principles Solid-Phase Extraction Solid-Phase Microextraction. Flow Injection Analysis Principles Instrumentation. Ion Exchange Principles. Ion-Selective Electrodes Liquid Membrane Gas Sensing Probes Enzyme Electrodes. Membrane Techniques Dialysis and Reverse Osmosis Ultrafiltration Pervaporation. Solvents. 

Ion-selective membranes derive their permselective properties from either ion exchange, solubility or complexation phenomena. Current ion-selective electrodes contain membranes which consist of glass, solid or liquid phases. 

Ion-selective electrodes are membrane systems used as potentiometric sensors for various ions. In contrast to ion-exchanger membranes, they contain a compact (homogeneous or heterogeneous) membrane with either fixed (solid or glassy) or mobile (liquid) ion-exchanger sites. 

So far several polyether family compounds exhibiting lithium ion-selectivity have been reported, e.g., 12-crown-4, 14-crown-4, macro-cyclic compounds having tetrahydrofuran as a chain component, cryptand [211], spherand, noncyclic diamide, and so on (2). However these are not always suitable to transport lithium ion selectively through liquid membranes. That is, these are useful as extracting agents or chemical devices for ion selective electrode (3), but are not available and... 

Alternatively, polymers like PVC can be mixed with highly viscous liquids. The latter also can act as solvents for certain molecules that can act as receptors. The so-called softeners in classical polymers frequently have useful solvent properties. For preparing a selective sensor membrane, the polymer containing a softener is dissolved in a volatile solvent like dioxane, the active sensor substance is added, and then the solution is poured onto a flat surface. After evaporation of the dioxane, a thin membrane remains. In ion-selective electrodes, such membranes are used. They contain certain ligands (e.g. crown ethers or other neutral carriers) which are able to react selectively with cations to form complex compounds. 

One example of a liquid-based ion-selective electrode is that for Ca +, which uses a porous plastic membrane saturated with di-(n-decyl) phosphate (Figure 11.13). As shown in Figure 11.14, the membrane is placed at the end of a nonconducting cylindrical tube and is in contact with two reservoirs. The outer reservoir contains di-(n-decyl) phosphate in di- -octylphenylphosphonate, which soaks into the porous membrane. The inner reservoir contains a standard aqueous solution of Ca + and a Ag/AgCl reference electrode. Calcium ion-selective electrodes are also available in which the di-(n-decyl) phosphate is immobilized in a polyvinyl chloride... 

The properties of several representative liquid-based ion-selective electrodes are presented in Table 11.3. An electrode using a liquid reservoir can be stored in a dilute solution of analyte and needs no additional conditioning before use. The lifetime of an electrode with a PVC membrane, however, is proportional to its exposure to aqueous solutions. For this reason these electrodes are best stored by covering the membrane with a cap containing a small amount of wetted gauze to... 

Faraday s law (p. 496) galvanostat (p. 464) glass electrode (p. 477) hanging mercury drop electrode (p. 509) hydrodynamic voltammetry (p. 513) indicator electrode (p. 462) ionophore (p. 482) ion-selective electrode (p. 475) liquid-based ion-selective electrode (p. 482) liquid junction potential (p. 470) mass transport (p. 511) mediator (p. 500) membrane potential (p. 475) migration (p. 512) nonfaradaic current (p. 512)... 

This experiment describes the preparation and evaluation of two liquid-membrane Na+ ion-selective electrodes, using either the sodium salt of monensin or a hemisodium ionophore as ion exchangers incorporated into a PVG matrix. Electrodes prepared using monensin performed poorly, but those prepared using hemisodium showed a linear response over a range of 0.1 M to 3 X 10 M Na+ with slopes close to the theoretical value. 

Despite the fact that a great lot of ion-selective electrodes (ISEs) with liquid and film polymeric membranes for the determination of physiologically active amines (PhAA) has been described, the factors responsible for their selectivity have not yet been studied sufficiently. In this work, the influence of plasticizer and ion-exchanger nature on the selectivity of ISEs reversible to PhAA cations of various stmctures has been discussed. 

Glass electrodes are used for the analysis of hydrogen ions various other types of ion-selective electrodes are used for the other ions. Electrodes with ion-selective solvent membranes have become very popular. These electrodes are made in the form of thin glass capillaries (about 1 rm in diameter), which in the lower part contain a small volume of a liquid that is immiscible with water the remainder of the capillary is filled with electrolyte solution (e.g., 3M KCl). 

One barrel-tip contains the organic membrane phase and an internal reference electrode the other constitutes a second reference electrode. A four-barrel configuration with a 1-pm tip in which three barrels are liquid membrane electrodes for Na, Ca and and the fourth is a reference electrode has been reported Some representative applications of ion-selective electrodes for intracellular measurements are shown in Table 3. 

Liquid Membrane Ion-Selective Electrodes Response Mechanisms Studied by Optical Second Harmonic Generation and Photoswitchable lonophores as a Molecular Probe... 

The purpose of this chapter is to describe these experimental approaches for understanding the molecular mechanism of the membrane potentials for ionophore-incorpo-rated liquid membrane ion-selective electrodes. 

Two aqueous phases separated by a liquid membrane, EM, of nitrobenzene, NB, were layered in a glass tube, which was equipped with Pt counterelectrodes in W1 and W2 and reference electrodes in three phases as in Eq. (1). Reference electrodes set in W1 and W2 were Ag/AgCl electrodes, SSE, and those in LM were two tetraphenylborate ion selective electrodes [26,27], TPhBE, of liquid membrane type. The membrane current, /wi-w2 was applied using two Pt electrodes. The membrane potential, AFwi-wi recorded as the potential of SSE in W2 vs. that in W1. When a constant current of 25 /aA cm was applied from W1 to W2 in the cell given as Eq. (1), the oscillation of membrane potential was observed as shown in curve 1 of Fig. 1. The oscillation of AFwi-wi continued for 40 to 60 min, and finally settled at ca. —0.40 V. 

Curve 1 in Fig. 5 gives an example of the oscillation of membrane current observed with the liquid membrane system as in Eq. (3) by applying a constant AFwi-w2 of —0.48 V and measuring the time course of the current through the LM, /wi-w2- The cell used was the same as that used for the measurement of the potential oscillation, except a tetraphenyl-arsonium ion selective electrode [26,27], TPhAsE, was employed as a reference electrode in LM of NB ... 

All ion-exchanger membranes with fixed ion-exchanger sites are porous to a certain degree (in contrast to liquid membranes and to membranes of ion-selective electrodes based on solid or glassy electrolytes, such as a single crystal of lanthanum fluoride). 

Liquid membranes in this type of ion-selective electrodes are usually heterogeneous systems consisting of a plastic film (polyvinyl chloride, silicon rubber, etc.), whose matrix contains an ion-exchanger solution as a plasticizer (see Fig. 6.5). 

The membrane phase m is a solution of hydrophobic anion Ax (ion-exchanger ion) and cation Bx+ in an organic solvent that is immiscible with water. Solution 1 (the test aqueous solution) contains the salt of cation Bx+ with the hydrophilic anion A2. The Gibbs transfer energy of anions Ax and A2 is such that transport of these anions into the second phase is negligible. Solution 2 (the internal solution of the ion-selective electrode) contains the salt of cation B with anion A2 (or some other similar hydrophilic anion). The reference electrodes are identical and the liquid junction potentials A0L(1) and A0L(2) will be neglected. 

Dinten O., Experimental and theoretical contributions in order to improve ion-selective electrodes based on PVC liquid membranes in terms of membrane technology, ETH Ph.D. thesis No. 8591, 1988. 

The concept of the pH electrode has been extended to include other ions as well. Considerable research has gone into the development of these ion-selective electrodes over the years, especially in studying the composition of the membrane that separates the internal solution from the analyte solution. The internal solution must contain a constant concentration of the analyte ion, as with the pH electrode. Today we utilize electrodes with 1) glass membranes of varying compositions, 2) crystalline membranes, 3) liquid membranes, and 4) gas-permeable membranes. In each case, the interior of the electrode has a silver-silver chloride wire immersed in a solution of the analyte ion. 

FIGURE 14.10 A drawing of an ion-selective electrode with a liquid membrane. 

---