Insulators, coating characteristics

Electromagnetic flow meters ate avadable with various liner and electrode materials. Liner and electrode selection is governed by the corrosion characteristics of the Hquid. Eor corrosive chemicals, fluoropolymer or ceramic liners and noble metal electrodes are commonly used polyurethane or mbber and stainless steel electrodes are often used for abrasive slurries. Some fluids tend to form an insulating coating on the electrodes introducing errors or loss of signal. To overcome this problem, specially shaped electrodes are avadable that extend into the flow stream and tend to self-clean. In another approach, the electrodes are periodically vibrated at ultrasonic frequencies. 

TBCs consist of two different materials applied to the hot side of the component a bond coat applied to the surface of the part, and an insulating oxide applied over the bond coat. Characteristics of TBCs are that the insulation is porous, and they have two layers. The first layer is a bond coat of NICrAlY, and the second is a top coat of YTTRIA stabilized Zirconia. 

Polyesters are carbon-based polymers that go into an enormous variety of manufactured items. Examples include Dacron and Mylar, as well as plastic bottles and insulating coatings in computers and other electronic equipment. Permanent-press clothing owes its wrinkle-free characteristics to polyester fibers in the fabrics. 

Technical characteristics of the fire-protective and heat-insulating coatings are shown in Table 8.2. 

Materials tests and standards of nonmetallic organic and inorganic coatings systems on corrodible substrates are described. Coatings systems may provide many properties in addition to corrosion resistance, e.g., appearance, insulation, smd tack. Although test methods exist for a wide variety of coatings characteristics, the primary nonmetallic coatings tests addressed herein evaluate corrosion resistance, adhesion, and physical/chemical durability. 

Polyimide. Polyimide is a biaxiaHy oriented high performance film that is tough, flexible, and temperature- and combustion-resistant. Its room temperature properties compare to poly(ethylene terephthalate), but it retains these good characteristics at temperatures above 400°C. Its electrical resistance is good and it is dimensionally stable. The principal detriment is fairly high moisture absorbance. The main uses are for electrical insulation, particularly where high temperatures are prevalent or ionizing radiation is a problem. The films may be coated to reduce water absorption and enhance... 

Oxidized starches, usually those prepared by hypochlorite oxidation, ate used in paper coatings and adhesives (qv) to improved surface characteristics for printing or writing. Oxidized starches may also be employed as textile warp sizes and finishes, in manufacture of insulation and... 

Silicon dioxide (Si02), also known as silica, is a major industrial material with many applications particularly in the semiconductor industry in the form of coatings, which are produced mostly by CVD. It is an excellent electrical insulator with very low thermal expansion and good resistance to thermal shock. Its characteristics and properties are summarized in Table 11.4. 

Recently, several molecule-based microelectrochemical devices have been developed by the Wrighton group.(14.15.21-22) A microelectrode array coated with poly(I) results in a microelectrochemical transistor with the unique characteristic that shows "turn on" in two gate potential, Vq, regimes, one associated with the polythiophene switching from an insulator to a conductor upon oxidation and one associated with the v2+ + conventional redox centers. 

Uses. Manufacture of formaldehyde resins, which are used as adhesives in particle board, plywood, and insulating materials countertops and wall paneling coating to fabrics to impart permanent press characteristics manufacture of rubber, photographic film, leather, cosmetics, embalming fluids, insulation disinfectants and fumigants... 

Sodium contamination and drift effects have traditionally been measured using static bias-temperature stress on metal-oxide-silicon (MOS) capacitors (7). This technique depends upon the perfection of the oxidized silicon interface to permit its use as a sensitive detector of charges induced in the silicon surface as a result of the density and distribution of mobile ions in the oxide above it. To measure the sodium ion barrier properties of another insulator by an analogous procedure, oxidized silicon samples would be coated with the film in question, a measured amount of sodium contamination would be placed on the surface, and a top electrode would be affixed to attempt to drift the sodium through the film with an applied dc bias voltage. Resulting inward motion of the sodium would be sensed by shifts in the MOS capacitance-voltage characteristic. 

---