Insertion reactions carbene complexes

By a photochemically induced elimination of CO, a chromium carbene complex with a free coordination site is generated. That species can coordinate to an alkyne, to give the alkyne-chromium carbonyl complex 4. The next step is likely to be a cycloaddition reaction leading to a four-membered ring compound 5. A subsequent electrocyclic ring opening and the insertion of CO leads to the vinylketene complex 6 ... 

Photolytically generated carbene, as mentioned above, undergoes a variety of undiscriminated addition and insertion reactions and is therefore of limited synthetic utility. The discovery (3) of the generation of carbenes by the zinc-copper couple, however, makes carbene addition to double bonds synthetically useful. The iodo-methylzinc iodide complex is believed to function by electrophilic addition to the double bond in a three-center transition state giving essentially cis addition. Use of the... 

Contradictory to a carbene mechanism is the high selectivity which is typical for the metathesis reaction. In the case of carbene complexes, side reactions must be expected, such as addition and insertion [Eqs. (38) and (39)] ... 

These carbene (or alkylidene) complexes are used for various transformations. Known reactions of these complexes are (a) alkene metathesis, (b) alkene cyclopropanation, (c) carbonyl alkenation, (d) insertion into C-H, N-H and O-H bonds, (e) ylide formation and (f) dimerization. The reactivity of these complexes can be tuned by varying the metal, oxidation state or ligands. Nowadays carbene complexes with cumulated double bonds have also been synthesized and investigated [45-49] as well as carbene cluster compounds, which will not be discussed here [50]. 

In 1986 Yamashida et al. found that the reaction of the (morpholino)phenyl-carbene complex 46 with symmetric alkynes 47 gave the morpholinylindene derivatives 48 and 49, as well as the indanones 50 derived from the latter by hydrolysis, in excellent yields (Scheme 9) [54]. This contrasts with the behavior of the corresponding (methoxy)phenylcarbene complex, which solely undergoes the Dotz reaction [55]. This transformation of the amino-substituted complex 46 apparently does not involve a CO insertion, which is an important feature of the Dotz benzannelation. 

The insertion of alkynes into a chromium-carbon double bond is not restricted to Fischer alkenylcarbene complexes. Numerous transformations of this kind have been performed with simple alkylcarbene complexes, from which unstable a,/J-unsaturated carbene complexes were formed in situ, and in turn underwent further reactions in several different ways. For example, reaction of the 1-me-thoxyethylidene complex 6a with the conjugated enyne-ketimines and -ketones 131 afforded pyrrole [92] and furan 134 derivatives [93], respectively. The alkyne-inserted intermediate 132 apparently undergoes 671-electrocyclization and reductive elimination to afford enol ether 133, which yields the cycloaddition product 134 via a subsequent hydrolysis (Scheme 28). This transformation also demonstrates that Fischer carbene complexes are highly selective in their reactivity toward alkynes in the presence of other multiple bonds (Table 6). 

The ability of Fischer carbene complexes to transfer their carbene ligand to an electron-deficient olefin was discovered by Fischer and Dotz in 1970 [5]. Further studies have demonstrated the generality of this thermal process, which occurs between (alkyl)-, (aryl)-, and (alkenyl)(alkoxy)carbene complexes and different electron-withdrawing substituted alkenes [6] (Scheme 1). For certain substrates, a common side reaction in these processes is the insertion of the carbene ligand into an olefinic C-H bond [6, 7]. In addition, it has been ob-... 

The [3S+1C] cycloaddition reaction with Fischer carbene complexes is a very unusual reaction pathway. In fact, only one example has been reported. This process involves the insertion of alkyl-derived chromium carbene complexes into the carbon-carbon a-bond of diphenylcyclopropenone to generate cyclobutenone derivatives [41] (Scheme 13). The mechanism of this transformation involves a CO dissociation followed by oxidative addition into the cyclopropenone carbon-carbon a-bond, affording a metalacyclopentenone derivative which undergoes reductive elimination to produce the final cyclobutenone derivatives. 

The reaction of methyl acrylate and acrylonitrile with pentacarbonyl[(iV,iV -di-methylamino)methylene] chromium generates trisubstituted cyclopentanes through a formal [2S+2S+1C] cycloaddition reaction, where two molecules of the olefin and one molecule of the carbene complex have been incorporated into the structure of the cyclopentane [17b] (Scheme 73). The mechanism of this reaction implies a double insertion of two molecules of the olefin into the carbene complex followed by a reductive elimination. 

The reaction of alkenylcarbene complexes and alkynes in the presence of Ni(0) leads to cycloheptatriene derivatives in a process which can be considered as a [3C+2S+2S] cycloaddition reaction [125]. As shown in Scheme 77, two molecules of the alkyne and one molecule of the carbene complex are involved in the formation of the cycloheptatriene. This reaction is supposed to proceed through the initial formation of a nickel alkenylcarbene complex. A subsequent double regioselective alkyne insertion produces a new nickel carbene complex, which evolves by an intramolecular cycloprop anation reaction to form a nor-caradiene intermediate. These species easily isomerise to the observed cycloheptatriene derivatives (Scheme 77). 

Alkynylcarbene complexes react with strained and hindered olefins yielding products that incorporate up to four different components by the formation of five new carbon-carbon bonds [15b]. This remarkable transformation is explained by an initial [2+2] cycloaddition followed by CO insertion. The resulting intermediate suffers a well precedented [1,3]-migration of the metal fragment to generate a non-heteroatom-stabilised carbene complex intermediate which reacts with a new molecule of the olefin through a cyclopropana-tion reaction (Scheme 85). 

Abstract The photoinduced reactions of metal carbene complexes, particularly Group 6 Fischer carbenes, are comprehensively presented in this chapter with a complete listing of published examples. A majority of these processes involve CO insertion to produce species that have ketene-like reactivity. Cyclo addition reactions presented include reaction with imines to form /1-lactams, with alkenes to form cyclobutanones, with aldehydes to form /1-lactones, and with azoarenes to form diazetidinones. Photoinduced benzannulation processes are included. Reactions involving nucleophilic attack to form esters, amino acids, peptides, allenes, acylated arenes, and aza-Cope rearrangement products are detailed. A number of photoinduced reactions of carbenes do not involve CO insertion. These include reactions with sulfur ylides and sulfilimines, cyclopropanation, 1,3-dipolar cycloadditions, and acyl migrations. 

Several stable Group 6 metal-ketene complexes are known [14], and photo-driven insertion of CO into a tungsten-carbyne-carbon triple bond has been demonstrated [15]. In addition, thermal decomposition of the nonheteroatom-stabilized carbene complexes (CO)5M=CPh2 (M=Cr, W) produces diphenylke-tene [16]. Thus, the intermediacy of transient metal-ketene complexes in the photodriven reactions of Group 6 Fischer carbenes seems at least possible. 

The thermal benzannulation of Group 6 carbene complexes with alkynes (the Dotz reaction) is highly developed and has been used extensively in synthesis [90,91]. It is thought to proceed through a chromium vinylketene intermediate generated by sequential insertion of the alkyne followed by carbon monoxide into the chromium-carbene-carbon double bond [92]. The realization that photodriven CO insertion into Z-dienylcarbene complexes should generate the same vinylketene intermediate led to the development of a photochemical variant of the Dotz reaction (Table 14). 

Interestingly, [Ee(F20-TPP)C(Ph)CO2Et] and [Fe(p2o-TPP)CPh2] can react with cyclohexene, THF, and cumene, leading to C-H insertion products (Table 3) [22]. The carbenoid insertion reactions were found to occur at allylic C-H bond of cyclohexene, benzylic C-H bond of cumene, and ot C-H bond of THF. This is the first example of isolated iron carbene complex to undergo intermolecular carbenoid insertion to saturated C-H bonds. 

The a-osmiumdiazo compound 91 decomposes in a thermal reaction to yield the metallacyclic complex 93 (130). This resembles the electrophilic carbene insertion reaction forming OsCl(CO)2(PPh2C6H4CHCl) (PPh3) (77) (see Section V,D,2), and we suggest that a similar insertion reaction of an electrophilic, cationic osmium carbyne 92 is the key step in this transformation. An X-ray structure determination has confirmed the formulation of 93. 

In view of the extensive and fruitful results described above, redox reactions of small ring compounds provide a variety of versatile synthetic methods. In particular, transition metal-induced redox reactions play an important role in this area. Transition metal intermediates such as metallacycles, carbene complexes, 71-allyl complexes, transition metal enolates are involved, allowing further transformations, for example, insertion of olefins and carbon monoxide. Two-electron- and one-electron-mediated transformations are complementary to each other although the latter radical reactions have been less thoroughly investigated. 

As shown in the previous two sections, rhodium(n) dimers are superior catalysts for metal carbene C-H insertion reactions. For nitrene C-H insertion reactions, many catalysts found to be effective for carbene transfer are also effective for these reactions. Particularly, Rh2(OAc)4 has demonstrated great effectiveness in the inter- and intramolecular nitrene C-H insertions. The exploration of enantioselective C-H amination using chiral rhodium catalysts has been reported by several groups.225,244,253-255 Hashimoto s dirhodium tetrakis[A-tetrachlorophthaloyl-(A)-/ r/-leuci-nate], Rh2(derived rhodium complex, Rh2(i -BNP)4 48,244 afforded moderate enantiomeric excess for amidation of benzylic C-H bonds with NsN=IPh. 

Transition metal-catalyzed reactions of ct-diazocarbonyl compounds proceed via electrophilic Fischer-type carbene complexes. Consequently, when cr-diazoketone 341 was treated, at room temperature, with catalytic amounts of [ RhiOAcbh, it gave the formation of a single NH insertion product, which was assigned to the enol stmcture 342. At room temperature, in both solid state and in solution, 342 tautomerizes to give the expected 1-oxoperhydropyr-rolo[l,2-c]oxazole derivative 343 (Scheme 50) <1997TA2001>. 

Generally phenol formation is the major reaction path however, relatively minor modifications to the structure of the carbene complex, the alkyne, or the reaction conditions can dramatically alter the outcome of the reaction [7]. Depending on reaction conditions and starting reactants roughly a dozen different products have been so far isolated, in addition to phenol derivatives [7-12], In particular, there is an important difference between the products of alkyne insertion into amino or alkoxycarbene complexes. The electron richer aminocarbene complexes give indanones 8 as the major product due to failure to incorporate a carbon monoxide ligand from the metal, while the latter tend to favor phenol products 7 (see Figure 2). 

In addition to reactions characteristic of carbonyl compounds, Fischer-type carbene complexes undergo a series of transformations which are unique to this class of compounds. These include olefin metathesis [206,265-267] (for the use as metathesis catalysts, see Section 3.2.5.3), alkyne insertion, benzannulation and other types of cyclization reaction. Generally, in most of these reactions electron-rich substrates (e.g. ynamines, enol ethers) react more readily than electron-poor compounds. Because many preparations with this type of complex take place under mild conditions, Fischer-type carbene complexes are being increasingly used for the synthesis [268-272] and modification [103,140,148,273] of sensitive natural products. 

In addition to the reaction of vinylcarbene complexes with alkynes, further synthetic procedures have been developed in which Fischer-type carbene complexes are used for the preparation of benzenes. Most of these transformations are likely to be mechanistically related to the Dbtz benzannulation reaction, and can be rationalized as sequences of alkyne-insertions, CO-insertions, and electrocycli-zations. A selection of examples is given in Table 2.18. Entry 4 in Table 2.18 is an example of the Diels-Alder reaction (with inverse electron demand) of an enamine with a pyran-2-ylidene complex (see also Section 2.2.7 and Figure 2.36). In this example the adduct initially formed eliminates both chromium hexacarbonyl ([4 -I- 2] cycloreversion) and pyrrolidine to yield a substituted benzene. 

In most of the reactions of heteroatom-substituted carbene complexes with alkynes the first event is insertion of the alkyne into the carbon-metal double bond. If vinylcarbene complexes undergo insertion reactions with alkynes, (1,3-butadien-l-yl)carbene complexes result (Figure 2.27). 

Depending on the types of substituents and the precise reaction conditions (l,3-butadien-l-yl)carbene complexes can undergo direct cyclization to yield cyclo-pentadienes [337,350]. As mentioned in Section 2.2.5.1, cyclopentadiene formation occurs particularly easily with aminocarbene complexes [351]. Alternatively, in particular at higher reaction temperatures, CO-insertion can lead to the formation of a vinylketene complex, which, again depending on the electronic properties of the substituents and the reaction conditions, can cyclize to yield cyclobutenones, furans [91,352], cyclopentenones, furanones [91], or phenols (Dotz benzannulation) [207,251,353]. 

---