Initiators Ziegler

Metal Complex Initiation (Ziegler-Natta Catalysis)... 

The active center I, which first initiates and then propagates the chain, can be a free radical, an anion, a cation or a transition-metal based initiator (Ziegler-Natta systems or metathesis reactions). 

Professor Kaminsky reported on the Zirconocene/MAO catalyst system for the first time at the lUPAC Polymer Conference in Florence, Italy, in 1980 and at the Macromolecular Meeting in Midland, Michigan, in 1981. Kaminsky reported that the Zirconocene/MAO catalyst system was 10 to 100 times more active than the initial Ziegler catalyst and that the zirconium-based activity was 40 x 10 g PE/g Zr/h at 95 C and 8 bar ethylene pressure. 

Among other possible reactions, these free radicals can initiate ordinary free-radical polymerization. The Ziegler-Natta systems are thus seen to encompass several mechanisms for the initiation of polymerization. Neither ionic nor free-radical mechanisms account for stereoregularity, however, so we must look further for the mechanism whereby the Ziegler-Natta systems produce this interesting effect. 

The weight percent propylene in ethylene-propylene copolymers for different Ziegler-Natta catalysts was measuredt for the initial polymer produced from identical feedstocks. The following results were obtained ... 

In the mid-1950s, the Nobel Prize-winning work of K. Ziegler and G. Natta introduced anionic initiators which allowed the stereospecific polymerization of isoprene to yield high cis-1,4 stmcture (3,4). At almost the same time, another route to stereospecific polymer architecture by organometaHic compounds was aimounced (5). 

Complexation of the initiator and/or modification with cocatalysts or activators affords greater polymerization activity (11). Many of the patented processes for commercially available polymers such as poly(MVE) employ BE etherate (12), although vinyl ethers can be polymerized with a variety of acidic compounds, even those unable to initiate other cationic polymerizations of less reactive monomers such as isobutene. Examples are protonic acids (13), Ziegler-Natta catalysts (14), and actinic radiation (15,16). 

Polyacetylenes. The first report of the synthesis of a strong, flexible, free-standing film of the simplest conjugated polymer, polyacetylene [26571-64-2] (CH), was made in 1974 (16). The process, known as the Shirakawa technique, involves polymerization of acetylene on a thin-film coating of a heterogeneous Ziegler-Natta initiator system in a glass reactor, as shown in equation 1. 

There are several approaches to the preparation of multicomponent materials, and the method utilized depends largely on the nature of the conductor used. In the case of polyacetylene blends, in situ polymerization of acetylene into a polymeric matrix has been a successful technique. A film of the matrix polymer is initially swelled in a solution of a typical Ziegler-Natta type initiator and, after washing, the impregnated swollen matrix is exposed to acetylene gas. Polymerization occurs as acetylene diffuses into the membrane. The composite material is then oxidatively doped to form a conductor. Low density polyethylene (136,137) and polybutadiene (138) have both been used in this manner. 

Polymerization of olefins such as styrene is promoted by acid or base or sodium catalysts, and polyethylene is made with homogeneous peroxides. Condensation polymerization is catalyzed by acid-type catalysts such as metal oxides and sulfonic acids. Addition polymerization is used mainly for olefins, diolefins, and some carbonyl compounds. For these processes, initiators are coordination compounds such as Ziegler-type catalysts, of which halides of transition metals Ti, V, Mo, and W are important examples. 

Examine the sequence of structures corresponding to Ziegler-Natta polymerization of ethene, or more specifically, one addition step starting from a zirconocene-ethene complex where R=CH3. Plot energy (vertical axis) vs. frame number (horizontal axis). Sketch Lewis structures for the initial complex, the final adduct and the transition state. Indicate weak or partial bonding by using dotted lines. 

Polypropylene (PP) is a major thermoplastic polymer. Although polypropylene did not take its position among the large volume polymers until fairly recently, it is currently the third largest thermoplastic after PVC. The delay in polypropylene development may be attributed to technical reasons related to its polymerization. Polypropylene produced by free radical initiation is mainly the atactic form. Due to its low crystallinity, it is not suitable for thermoplastic or fiber use. The turning point in polypropylene production was the development of a Ziegler-type catalyst by Natta to produce the stereoregular form (isotactic). 

The three different stereochemical forms of polypropylene all have somewhat different properties, and all can be made by using the right polymerization catalyst. Propylene polymerization using radical initiators does not work well, but polymerization using Ziegler-Natta catalysts allows preparation of isotactic, syndiotactic, and atactic polypropylene. 

Alkali metals are obvious examples of electron donors, and indeed polymerization of butadiene or styrene initiated by metallic sodium results from an electron transfer initiation process. This reaction has been, and is still, being studied by many investigators, notably by Ziegler55 and by Russian workers.1 In Ziegler s notation the initiation is represented by the equation... 

Protonation of the TMM complexes with [PhNMe2H][B(C6Fs)4] in chlorobenzene at —10 °C provided cationic methallyl complexes which are thermally robust in solution at elevated temperatures as determined by NMR spectroscopy. In contrast, addition of BfCgFsls to the neutral TMM precursors provided zwitterionic allyl complexes (Scheme 98). Surprisingly, it was found that neither the cationic nor the zwitterionic complexes are active initiators for the Ziegler-Natta polymerization of ethylene and a-olefins. °°... 

Evaluation and Analysis of a Multisite Kinetic Model for Polymerization Initiated with Supported Ziegler—Natta Catalysts... 

---