Information from requirements

The construction of a project cashflow requires information from a number of different sources. The principal inputs are typically -... 

Templates for each of the joint configurations are stored within the system. The operator selects one of the templates, and is provided with a visual representation, as shown in Figure 3, on which he can alter the Joint dimensions and weld geometry to match those of the item to be examined any ae-cess restrictions can also be defined. Using information from a database of available probes, along with the examination level required, ProcGen then calculates the set of scans required (see Figure 4). 

After development of a new process scheme at laboratory scale, constmction and operation of pilot-plant faciUties to confirm scale-up information often require two or three years. An additional two to three years is commonly required for final design, fabrication of special equipment, and constmction of the plant. Thus, projections of raw material costs and availabiUty five to ten years into the future become important in adopting any new process significantly different from the current technology. 

For different types of collections, this balance is differently defined. For example paper conservation treatments commonly undertaken in the museum conservation laboratory would be impractical in a Hbrary archive having a far greater collection size. The use of treatments for mass paper quantities would be unacceptable in the art museum. Documents in archives and books in Hbraries serve a different goal from art objects in a museum. Their use value Hes primarily in their information rather than in an intrinsic esthetic value. Whereas optimal preservation of that information value requires preservation of the object itself, a copy or even a completely different format could serve the same purpose. 

With the advent of the microprocessor, digital technology began to be used for data collection, feedback control, and aU other information processing requirements in production facUities. Such systems must acquire data from a variety of measurement devices, and control systems must drive final actuators. 

Contrac tors bids offer the most rehable information on cost. Order-of-magnitude costs, however, may be required for preliminary studies. One way of estimating them is to obtain cost information from similar facihties and scale it to the proposed installation. Costs of steel storage tanks and vessels have been found to vaiy approximately as the 0.6 to 0.7 power of their weight [see Happel, Chemical Process Economics, Wiley, 1958, p. 267 also Williams, Chem. Eng., 54(12), 124 (1947)]. AU estimates cased on the costs of existing eqiiipment must be corrected for changes in the price index from the date when the equipment was built. Considerable uncertainty is involved in adjusting data more than a few years old. 

If an on-site visit is required at this stage, review personnel can usually obtain the information from the client through a brief visit. It consists of six parts ... 

The toller needs to be familiar with all raw materials, intermediate materials, products and wastes, used, produced or generated, respectively, while operating the process. Tollers in the U.S. should comply with the Federal OSHA Hazard Communication Standard, codified as 29 CFR. 1910.1200 and any similar state right-to-know laws that are currently in force or may be enacted during the term of the contract. This is often stated in the contract. The contract may require the toller to inform its employees of the chemical hazards associated with products or chemicals and may also be responsible for training its employees in the proper handling methods. The toller has an obligation when in doubt about a product or chemical, to seek further information from the product s manufacturer. 

No further information is required to identify this compound from its NMR spectra 15. Conditions CDCI3, 25 °C, 20 MHz. (a) Proton broadband decoupled spectrum (b) NOE enhanced coupled spectrum (gated decoupling) (c) expanded section of (b). 

No further information is required to identify this compound and its relative configuration from the set of NMR experiments 36 ... 

There are at least four kinds of information available from an Auger spectrum. The simplest and by far most frequently used is qualitative information, indicating which elements are present within the sampling volume of the measurement. Next there is quantitative information, which requires a little more care during acquisition to make it extractable, and a little more effort to extract it, but which tells how much of each of the elements is present. Third, there is chemical information which shows the chemical state in which these elements are present. Last, but by far the least used, there is information on the electronic structure of the material, such as the valance-band density of states that is folded into the line shape of transitions involving valance-band electrons. There are considerations to keep in mind in extracting each of these kinds of information. 

Procedures that consolidate information from several disciplines for transmission to the customer when required... 

To guarantee shipment on time, you either need to maintain an adequate inventory of finished goods for shipment on demand or utilize only predictable processes and obtain sufficient advanced order information from your customer. When you examine some of the requirements in ISO/TS 16949, you may be tempted to question how you can continually improve performance, reduce costs, and minimize space, material travel, equipment downtime, process variation, etc. and meet 100% on-time shipments. You can t, unless you have a partnership with your customer in which there is mutual assistance to meet common objectives. Without sufficient lead time on orders you will be unlikely to meet the target. However, the standard does acknowledge that you may not always be successful. There will be matters outside your control and matters over which you need complete control. It is the latter that you can do something about and take corrective action should the target not be achieved. 

Four parameters often used to determine a fireball s thermal-radiation hazard are the mass of fuel involved and the fireball s diameter, duration, and thermal-emissive power. Radiation hazards can then be calculated from empirical relations. For detailed calculations, additional information is required, including a knowledge of the change in the fireball s diameter with time, its vertical rise, and variations in the fireball s emissive power over its lifetime. Experiments have been performed, mostly on a small scale, to investigate these parameters. The relationships obtained for each of these parameters through experimental investigation are presented in later sections of this chapter. 

These are concerned with retrieving information from memory (e.g., the time required for a reactor to fill), or from a visual display or a procedure. 

The main function of an incident reporting system (IRS) is to identify recurring trends from large numbers of incidents with relatively minor outcomes, or from near misses. One of the important characteristics of an IRS is that the time and resources required to evaluate an incident and incorporate it into the database must be minimized. This means that the designers of an IRS have to carefully evaluate the benefits and costs of requiring more comprehensive information from each incident that is to be reported. A requirement for too much information will bring the system into disrepute, and too little information will mean that the results are too general to be of any real value. 

---