Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Ceramics industrial

Singer, F. and Singer, S.S. (1963). Industrial Ceramics. Chapman and Hall, London. [Pg.143]

Cot, L., C. Guizard and A. Larbot. 1988. Novel ceramic material for liquid separation process Present and prospective applications in microfiltration and ultrafiltration. Industrial Ceramics 8(3) 143-48. [Pg.59]

Barbieri, L., Corradi, A., Lancellotti, I. Manfredini, T. 2002. Use of municipal incinerator bottom ash as sintering promoter in industrial ceramics. Waste Management, 22, 859-863. [Pg.421]

Pierson, H.O. Handbook of Refractory Carbides and Nitrides Properties, Characteristics, Processing, and Applications. Noyes Publications, Park Ridge. NJ. 1996. Singer, F. and S.S. Singer Industrial Ceramics, Chemical Publishing Co., Inc.. New York, NY, 1964. [Pg.1430]

Although this book covers most aspects of ceramics, most attention is paid to the period from approximately 1850 until now. This period is characterized by a rapid growth of industrial ceramics and a flourishing period for the type of ceramics which hardly used clay as a raw material, the co-called technical ceramics. The number of applications of ceramic materials in the period from 1850 until 2000 is much larger than in the entire ceramic history before 1850 (figure 2.5)... [Pg.14]

This list is far from complete. The glass industry, ceramic industry, manufacturers of fire places, etc., could also be added to it. [Pg.220]

Yoshida M, Tanaka K, Tsuruzono S, Tatsumi T (1999) Industrial Ceram 19 188... [Pg.167]

Tiger Industrial Ceramics Co. Ltd, Zhangli Village, Xiangdong Town, Pingxiang City, Jiangxi Province, China http //www.alibaba.com... [Pg.393]

Dal Maschio, R., Fabbri, B. and Fiori, C., Industrial applications of refractories containing magnesium aluminate spinel , Industrial Ceramics, 1988 8(3) 121-6. [Pg.394]

Cortes, G., Magnesia alumina spinels for the refractory industry , Ceramic Technology International, 1994 109-12. [Pg.397]

The industrial ceramics produced by conventional sintering of 8-phase Si3N4 powders synthesized by SHS (Petrovskii et al, 1981) can be used as high-temperature articles with attractive dielectric properties (tan6=4.4 10 at/= 10 Hz, and dielectric strength, Ea=9.2 kV/mm). Also, silicon nitride powders with a relatively high a-phase content ( 80%) have been used for the production of advanced structural ceramics with good mechanical properties ([Pg.109]

Fairey Industrial Ceramics, Ltd. Fillcybrooks Stone Staffs STl 5 OPU UK... [Pg.584]

F. Singer, S. Singer, Industrial Ceramics, Chemical Publishing, New York, 1963. [Pg.344]

Fluoride emissions into the atmosphere are derived mainly from modern-day anthropogenic sources, particularly industrial sources. They include steel industry, phosphate fertilizer industry, aluminum industry, ceramics... [Pg.204]

The material presented in this chapter is based mainly on open literature dealing with the use of commercially available ceramic membranes and on technical data as acquired in Hoogovens Industrial Ceramics BV (HIC), the author s former company. This review is not meant to be exhaustive, but reflects examples of the use that ceramic membranes have found in certain industrial applications. [Pg.620]

This section is written in close cooperation with Kinetics Technology International B. V. in Zoetermeer and Holland Industrial Ceramics in Velsen-Noord, The Netherlands [33]. [Pg.648]

Akbar, S.A. (2003) Ceramic sensors for the glass industry. Ceramic Engineering and Science Proceedings, 163rd Conference on Glass Problems, 2002, The American Ceramic Society, Westerville, Ohio,... [Pg.488]

BeiyDium Aerospace industry/ceramic parts/ household appliances Fatal lung disease/heart and lung toxidty... [Pg.113]

Bricks, building blocks, cement, decorative parts, earthenware, industrial ceramics, insulators, light weight aggregate, porcelain, pottery, manufactured concrete parts, refractory materials and parts, tiles... [Pg.691]

Fig. 6.7-20 Industrial ceramic parts demonstrating the detail that can be achieved with this technology (courtesy Komage, Kell an See, Germany, and Dorst, Kochel am See, Germany)... Fig. 6.7-20 Industrial ceramic parts demonstrating the detail that can be achieved with this technology (courtesy Komage, Kell an See, Germany, and Dorst, Kochel am See, Germany)...
Refractory material, such as crushed pottery and FIREBRICKS used in the manufacturing of industrial CERAMICS to reduce shrinkage during drying and FIRING. [Pg.1086]

J. Schmidt M. Scheiffele Fabrication and Testing of corrugated 3D SiSiC ceramics for porous burner applications. Industrial Ceramics, Vol. 27, No. 2, S. 127-130,2007... [Pg.123]

E. Rambaldi, A. Tucci and L. Esposito, Use of recycled materials in the traditional ceramic industry, Ceram. Inter, 1-2, 13-23 (2004). [Pg.219]

Mistier, R. E., Tape casting The basic process for meeting the needs of the electronic industry, Ceram. Bull., 69(6), 1022 (1990). [Pg.529]


See other pages where Ceramics industrial is mentioned: [Pg.845]    [Pg.38]    [Pg.38]    [Pg.514]    [Pg.166]    [Pg.166]    [Pg.166]    [Pg.294]    [Pg.451]    [Pg.9]    [Pg.584]    [Pg.190]    [Pg.274]    [Pg.222]    [Pg.619]    [Pg.1]    [Pg.13]    [Pg.169]    [Pg.690]    [Pg.705]    [Pg.121]   
See also in sourсe #XX -- [ Pg.635 ]




SEARCH



Advanced ceramic industry sales

Ceramics industrial design

Ceramics industry

Ceramics industry

Ceramics industry, microwave heating

Ceramics industry: Spain

Coarse Ceramic Products for the Construction Industry

Metals ceramic industry

© 2024 chempedia.info