Hydrogen test for

Riordan SM, Mclver CJ, Duncombe VM, Thomas MC, Bolin TD Evaluation of the rice breath hydrogen test for small intestinal bacterial overgrowth. Am J Gastroenterol 2000 95 2858-2864. 

Miller A, Parkman HP, Urbain JC, Brown KL, Donahue DJ, Knight LC, Maurer AH, Fisher RS. Comparison of scintigraphy and lactulose breath hydrogen test for assessment of oro-cecal transit. Dig Dis Sci 1997 42(1) 10-18. 

Arsenic present only in traces (in any form) can be detected by reducing it to arsine and then applying tests for the latter. In Marsh s test, dilute sulphuric acid is added dropwise through a thistle funnel to some arsenic-free zinc in a flask hydrogen is evolved and led out of the flask by a horizontal delivery tube. The arsenic-containing compound is then added to the zinc-acid solution, and the delivery tube heated in the middle. If arsenic is present, it is reduced to arsine by the zinc-acid reaction, for example ... 

The colour sequence already described, for the reduction of van-adium(V) to vanadium(II) by zinc and acid, gives a very characteristic test for vanadium. Addition of a few drops of hydrogen peroxide to a vanadate V) gives a red colour (formation of a peroxo-complex) (cf. titanium, which gives an orange-yellow colour). 

Addition of hydrogen peroxide to a solution of a dichromate yields the blue colour of "peroxochromic acid. This is a test for soluble chromates and dichromates. 

The purple colour of this ion alone is a sufficient test for its presence addition of sulphuric acid and hydrogen peroxide discharges ihe colour. 

Copper(II) ions in aqueous solution are readily obtained from any copper-containing material. The reactions with (a) alkali (p. 430), (b) concentrated ammonia (p 413) and (c) hydrogen sulphide (p. 413) provide satisfactory tests for aqueous copper(II) ions. A further test is to add a hexacyanoferrate(II) (usually as the potassium salt) when a chocolate-brown precipitate of copper(II) hexacyanoferrate(II) is obtained ... 

The reaction with sodium is by no means an infallible practical test for alcohols since, strictly speaking, it is applicable only to pure anhydrous liquids. Traces of water, present as impurities, would give an initial evolution of hydrogen, but reaction would stop after a time if an alcohol is absent furthermore, certain esters and ketones also evolve hydrogen when treated with sodium (compare Section XI,7,6). It may, however, be assumed that if no hydrogen is evolved in the test, the substance is not an alcohol. 

It is recommended that the eompound be fused with a mixture of sodium carbonate (2 parts) and sodium peroxide (1 part) as in the test for Plvoaphoms. Extract the fused mass with water, filter, and acidify with dilute hydrochloric acid. Pass hydrogen sulphide through the hot solution arsenic is precipitated as yellow arsenic sulphide. If antimony is present, it will be precipitated as orange antimony trisulphide. 

When an organic compound is heated with a mixture of zinc powder and sodium carbonate, the nitrogen and halogens are converted into sodium cyanide and sodium hahdes respectively, and the sulphur into zinc sulphide (insoluble in water). The sodium cyanide and sodium hahdes are extracted with water and detected as in Lassaigne s method, whilst the zinc sulphide in the residue is decomposed with dilute acid and the hydrogen sulphide is identified with sodium plumbite or lead acetate paper. The test for nitrogen is thus not affected by the presence of sulphur this constitutes an advantage of the method. 

These equations tell us that the reverse process proton transfer from acids to bicarbon ate to form carbon dioxide will be favorable when of the acid exceeds 4 3 X 10 (pK, < 6 4) Among compounds containing carbon hydrogen and oxygen only car boxylic acids are acidic enough to meet this requirement They dissolve m aqueous sodium bicarbonate with the evolution of carbon dioxide This behavior is the basis of a qualitative test for carboxylic acids... 

Detecting the presence of small, even invisible, amounts of blood is routine. Physical characteristics of dried stains give minimal information, however, as dried blood can take on many hues. Many of the chemical tests for the presence of blood rely on the catalytic peroxidase activity of heme (56,57). Minute quantities of blood catalyze oxidation reactions between colorless materials, eg, phenolphthalein, luco malachite green, luminol, etc, to colored or luminescent ones. The oxidant is typically hydrogen peroxide or sodium perborate (see Automated instrumentation,hematology). 

Hydrogen chloride is produced when PVC bums. A series of tests for the Federal Aviation Administration studied this issue. In those studies, test animals were able to survive exposures to hydrogen chloride reaching 10,000 ppm (190). More recent studies indicate less of a potential for delayed effects on lung function than expected (191). In a typical fire, hydrogen chloride levels rarely exceed 300 ppm, a fact confirmed by the Boston Fire Department and Harvard University (192). In hundreds of autopsies conducted on fire victims in the United States, not one death has been linked to the presence of PVC. 

S tandard Methods of Test for Hydrogen Embrittlement of Copper, ASTM B 577, American Society for Testing and Materials, Philadelphia, Pa., 1992. Welding Braying and Soldering Vol. 6, Metals Handbook, 9th ed., ASM International, Materials Park, Ohio, 1983. 

Analysis methods for hydrogen absorbed in the deposit have been described (65), and instmments are commercially available to detect hydrogen in metals. Several working tests have been devised that put plated specimens under strain and measure the time to failure. A method for cadmium-plated work has been described (66) as has a mechanical test method for evaluating treatments on AlSl 4340 Steel (67). Additional information on testing for hydrogen embrittlement is also available (68). 

PSS-SG composite film was tested for sorption of heme proteins hemoglobin (Hb) and myoglobin (Mb). The peroxidaze activity of adsorbed proteins were studied and evaluated by optical and voltammetric methods. Mb-PSS-SG film on PG electrode was shown to be perspective for detection of dissolved oxygen and hydrogen peroxide by voltammetry with linear calibration in the range 2-30 p.M, and detection limit -1.5 p.M. Obtained composite films can be modified by different types of biological active compounds which is important for the development of sensitive elements of biosensors. 

Several types of flame arresters have been tested for hydrogen service and fonnd acceptable for qnenching of hydrogen-air and hydrogen-methane-air mixtnres. 

---