Hydrogen halides preparation

Conversion of alcohols by hydrogen halides preparation of alkyl halides... 

Special reagents introduced more recently allow significant improvements in hydrohalogenation of alkenes. HC1, HBr, and HI in aqueous-organic two-phase systems under phase-transfer conditions readily add to alkenes affording halides in nearly quantitative yields.123 Appropriately prepared silica and alumina have been found to mediate the addition of HC1, HBr, and HI to alkenes.124 The method is very convenient since it uses hydrogen halides prepared in situ 124 125... 

Towards a simple Lewis base, for example the proton, phosphine is a poorer electron donor than ammonia, the larger phosphorus atom being less able to form a stable covalent bond with the acceptor atom or molecule. Phosphine is, therefore, a much weaker base than ammonia and there is no series of phosphonium salts corresponding to the ammonium salts but phosphonium halides. PH4X (X = Cl, Br, I) can be prepared by the direct combination of phosphine with the appropriate hydrogen halide. These compounds are much more easily dissociated than ammonium halides, the most stable being the iodide, but even this dissociates at 333 K PH4I = PH3 -t- HI... 

A halogen atom directly attached to a benzene ring is usually unreactive, unless it is activated by the nature and position of certain other substituent groups. It has been show n by Ullmann, however, that halogen atoms normally of low reactivity will condense with aromatic amines in the presence of an alkali carbonate (to absorb the hydrogen halide formed) and a trace of copper powder or oxide to act as a catalyst. This reaction, known as the Ullmant Condensation, is frequently used to prepare substituted diphenylamines it is exemplified... 

The majority of preparative methods which have been used for obtaining cyclopropane derivatives involve carbene addition to an olefmic bond, if acetylenes are used in the reaction, cyclopropenes are obtained. Heteroatom-substituted or vinyl cydopropanes come from alkenyl bromides or enol acetates (A. de Meijere, 1979 E. J. Corey, 1975 B E. Wenkert, 1970 A). The carbenes needed for cyclopropane syntheses can be obtained in situ by a-elimination of hydrogen halides with strong bases (R. Kdstcr, 1971 E.J. Corey, 1975 B), by copper catalyzed decomposition of diazo compounds (E. Wenkert, 1970 A S.D. Burke, 1979 N.J. Turro, 1966), or by reductive elimination of iodine from gem-diiodides (J. Nishimura, 1969 D. Wen-disch, 1971 J.M. Denis, 1972 H.E. Simmons, 1973 C. Girard, 1974),... 

Preparation of Alkyl Halides from Alcohols and Hydrogen Halides... 

PREPARATION OF ALKYL HALIDES FROM ALCOHOLS AND HYDROGEN HALIDES... 

The order of reactivity of the hydrogen halides parallels their acidity HI > HBr > HCl >> HF Hydrogen iodide is used infrequently however and the reaction of alco hols with hydrogen fluoride is not a useful method for the preparation of alkyl fluorides Among the various classes of alcohols tertiary alcohols are observed to be the most reactive and primary alcohols the least reactive... 

Secondary and pnmary alcohols do not react with HCl at rates fast enough to make the preparation of the conespondmg alkyl chlorides a method of practical value There fore the more reactive hydrogen halide HBr is used even then elevated temperatures are required to increase the rate of reaction... 

When applied to the synthesis of ethers the reaction is effective only with primary alcohols Elimination to form alkenes predominates with secondary and tertiary alcohols Diethyl ether is prepared on an industrial scale by heating ethanol with sulfuric acid at 140°C At higher temperatures elimination predominates and ethylene is the major product A mechanism for the formation of diethyl ether is outlined m Figure 15 3 The individual steps of this mechanism are analogous to those seen earlier Nucleophilic attack on a protonated alcohol was encountered m the reaction of primary alcohols with hydrogen halides (Section 4 12) and the nucleophilic properties of alcohols were dis cussed m the context of solvolysis reactions (Section 8 7) Both the first and the last steps are proton transfer reactions between oxygens... 

Both reactants m the Williamson ether synthesis usually originate m alcohol pre cursors Sodium and potassium alkoxides are prepared by reaction of an alcohol with the appropriate metal and alkyl halides are most commonly made from alcohols by reaction with a hydrogen halide (Section 4 7) thionyl chloride (Section 4 13) or phosphorus tri bromide (Section 4 13) Alternatively alkyl p toluenesulfonates may be used m place of alkyl halides alkyl p toluenesulfonates are also prepared from alcohols as their imme diate precursors (Section 8 14)... 

Cyclic g-haloacetals and -ketals have been prepared by variations on two basic methods. The most frequently used method involves the combination of an a,B-unsaturated carbonyl compound (acrolein, methyl vinyl ketone, croton-aldehyde, etc.) a diol, and the anhydrous hydrogen halide. All possible sequences of combining these three have been used. In most cases the... 

The preparations are much simplified if a stoichiometric amount of hydrogen halide is added using an indicator to determine the end point. We have found that 1,9-diphenylnona-1,3,6,8-tetraen-5-one (dicinnamalacetone) is of appropriate basicity to detect excess anhydrous hydrogen halides in organic solvents including chloroform, dichloromethane, benzene, toluene, acetic acid, and acetone (but not in alcohols). The reaction between the... 

There are several methods for generation of benzyne in addition to base-catalyzed elimination of hydrogen halide from a halobenzene, and some of these are more generally applicable for preparative work. Probably the most convenient method is diazotization of o-aminobenzoic acid. Concerted loss of nitrogen and carbon dioxide follows diazotization and generates benzyne. Benzyne can be formed in this manner in the presence of a variety of compounds with which it reacts rapidly. 

It is common practice to refer to the molecular species HX and also the pure (anhydrous) compounds as hydrogen halides, and to call their aqueous solutions hydrohalic acids. Both the anhydrous compounds and their aqueous solutions will be considered in this section. HCl and hydrochloric acid are major industrial chemicals and there is also a substantial production of HF and hydrofluoric acid. HBr and hydrobromic acid are made on a much smaller scale and there seems to be little industrial demand for HI and hydriodic acid. It will be convenient to discuss first the preparation and industrial uses of the compounds and then to consider their molecular and bulk physical properties. The chemical reactivity of the anhydrous compounds and their acidic aqueous solutions will then be reviewed, and the section concludes with a discussion of the anhydrous compounds as nonaqueous solvents. 

The other hydrogen halides are less tractable as solvents, as might be expected from their physical properties (p. 813), especially their low bps, short liquid ranges, low dielectric constants and negligible self-dissociation into ions. Nevertheless, they have received some attention, both for comparison with HF and as preparative media with their own special advantages.In particular, because of their low bp and consequent ease of removal, the liquid HX solvent systems have provided convenient routes to BX4, BF3C1 ,... 

The member of this class which has been studied most thoroughly is 2-benzylidene-4-methyl-5(2 )-oxazolone (57). This compound may be prepared by ring closure of either 3-bromo-2-phenylacetamido-propionic acid or A-(a-halophenylacetyl)alanine (56) [Eq. (30)]. These reactions presumably proceed via unstable halogeno-5(4IT)-oxazolones, which rapidly lose hydrogen halide. 

A particular case of the synthesis of isoxazoles via -diketone derivatives is the preparation of 3-halogenoisoxazoles (11) from -nitroketones (9) treated with hydrogen halides. This inter-... 

Both 3-bromo- and 3-iodo-indoles have been selectively prepared by titrimetric addition to the heterocycle of the halogen dissolved in dimethylformamide. The mildly basic solvent is probably responsible for trapping the generated hydrogen halide (82S1096). 

The hydrogen halides, HX, can be prepared by the direct reaction of the elements ... 

Removal of the 2 -sulfonyloxy group of 859 in a basic medium, followed by reaction with metal halides (LiBr and Nal) or hydrogen halides (HCl-1,4-dioxane, HBr-acetone, or0.1% HFin l,4-dioxane-AlF3)gave, byway of the 2,2 -anhydro intermediate 861, the 2 -halo derivatives 862-865. The 2 -deoxy analog 866 and l-(6-deoxy-6-fluoro- ff-D-mannopyranosyl)thy-mine were also prepared from 864 (R = H) and 861 (R = H), respectively. l-(4-Deoxy-4-fluoro-y -D-glucopyranosyl)thymine was obtained by the condensation method. A different kind of nucleoside, 5-(5-deoxy-5-fluoro-2,3-0-isopropylidene-a-D-ribofuranosyl)-l,3-dimethyluracil has also been prepared. ... 

The imide nitrogen atom was also most reactive to a variety of electrophilic species (hydrogen halides, pseudohalogens, and alkyl halides) in the parent Rimidophosphazenes, R(C—NH)-N=PPh3. With t-butyl hypochlorite the /V-chloro-derivatives, R(C=NCl)-N=PPh3, were obtained. R/ -Vinyl-phenylphosphazenes have been prepared by condensation of aldehydes with active methylene compounds ... 

A recent report mentions the preparation of Mo(R2cftc)2X2 (R = Et, R2= (012)5 X = Cl, Br) from a benzene suspension of OMo(R2C tc)2 and gaseous hydrogen halide 38). Unfortunately no properties of the resulting compound are given. 

---