Hydrogen dissolved substitutionally

Under reducing conditions, where hydrogen is stable in oxidation state 0 (as H2 in the gas phase) it might be possible to foresee neutral hydrogen atoms dissolved in oxides, probably interstitiaUy, as. Under even mueh more reducing conditions could also hydride ions be expected to become stable, e.g. as dissolved substitutionally for oxygen ions, as the defect Hq. ... 

A solution prepared by dissolving 2 g. of biomine in 100 g. of carbon tetra. chloride is satisfactory. Carbon tetrachloride is employed because it is an excellent solvent for bromine as well as for hydrocarbons it possesses the additional advan. tage of low solubility for hydrogen bromide, the evolution of which renders possible the distinction between decolourisation of bromine due to substitution or due to addition. 

Halogen exchange with KF is not successful ia acetic acid (10). Hydrogen bonding of the acid hydrogen with the fluoride ion was postulated to cause acetate substitution for the haUde however, the products of dissolved KF ia acetic acid are potassium acetate and potassium bifluoride (11). Thus KF acts as a base rather than as a fluorinating agent ia acetic acid. 

Electrochemical Fluorination. In the Simons electrochemical fluorination (ECF) process the organic reactant is dissolved in anhydrous hydrogen fluoride and fluorinated at the anode, usually nickel, of an electrochemical ceU. This process has been reviewed (6). Essentially all hydrogen atoms are substituted by fluorine atoms carbon—carbon multiple bonds are saturated. The product phase is heavier than the HF phase and insoluble in it and is recovered by phase separation. 

In the examples, a nitro group is substituted for a hydrogen atom, and water is a by-product. Nitro groups may, however, be substituted for other atoms or groups of atoms. In Victor Meyer reactions which use silver nitrite, the nitro group replaces a hahde atom, eg, I or Br. In a modification of this method, sodium nitrite dissolved in dimethyl formamide or other suitable solvent is used instead of silver nitrite (1). Nitro compounds can also be produced by addition reactions, eg, the reaction of nitric acid or nitrogen dioxide with unsaturated compounds such as olefins or acetylenes. 

Pyrrole is soluble in alcohol, benzene, and diethyl ether, but is only sparingly soluble in water and in aqueous alkaUes. It dissolves with decomposition in dilute acids. Pyrroles with substituents in the -position are usually less soluble in polar solvents than the corresponding a-substituted pyrroles. Pyrroles that have no substituent on nitrogen readily lose a proton to form the resonance-stabilized pyrrolyl anion, and alkaU metals react with it in hquid ammonia to form salts. However, pyrrole pK = ca 17.5) is a weaker acid than methanol (11). The acidity of the pyrrole hydrogen is gready increased by electron-withdrawing groups, eg, the pK of 2,5-dinitropyrrole [32602-96-3] is 3.6 (12,13). 

Substituted Ammonium Ions. Like NH4C1 the substance NH3-(CH3JCI, where a CH3 group has been substituted for one hydrogen, forms a crystalline solid and so do the substances NH2(CH3)2C1 and NH(CH3)3C1. When one of these substances is dissolved in water, it is completely dissociated into Cl- ions and molecular positive ions corresponding to (NH4)+. Suppose now that such a solution contains an NH3 molecule, and consider the following proton transfer... 

The dissociation of water coordinated to exchangeable cations of clays results in Brtfnsted acidity. At low moisture content, the Brrfnsted sites may produce extreme acidities at the clay surface-As a result, acid-catalyzed reactions, such as hydrolysis, addition, elimination, and hydrogen exchange, are promoted. Base-catalyzed reactions are inhibited and neutral reactions are not influenced. Metal oxides and primary minerals can promote the oxidative polymerization of some substituted phenols to humic acid-like products, probably through OH radicals formed from the reaction between dissolved oxygen and Fe + sites in silicates. In general, clay minerals promote many of the reactions that also occur in homogenous acid or oxidant solutions. However, rates and selectivity may be different and difficult to predict under environmental conditions. This problem merits further study. 

Technetium dissolves in dilute or concentrated nitric acid to form nitrate, Tc(N03)2. Reaction with concentrated sulfuric acid yields the sulfate TCSO4. Technetium is oxidized by hydrogen peroxide in alkaline solution to form soluble pertechnetate, Tc04 anion. Such pertechnatate anion forms complexes with tertiary or quarternary amines, pyridine and its methyl-substituted derivatives. 

The crude N-methyltryptamine obtained above (which can be substituted with 1.20 g of pure NMT) was dissolved in 50 mL ethanol, treated with 1.0 mL acetone, then with 0.5 g 10% Pd/C, and the reaction mixture shaken under a hydrogen atmosphere at 50 psi for 15 h. The catalyst was removed by filtration through a bed of Celite, the filtrate was stripped of solvent under vacuum, and the solid residue recrystallized from Et20/hexane to give 0.93 g N-methyl-N-isopropyltryptamine (MIPT) which had a mp 82-83 °C. Fom the benzyloxycarbonyltryptamine,... 

Bromine trifluoride, neat or dissolved in liquid bromine, has found application for the selective substitution of fluorine for bromine (Table 3).108,109 The reactions are carried out at temperatures of no more than 60 C. Under these conditions no hydrogen substitution is observed. As established for bromofluoroethanes. the relative ease of replacement of bromine in various groups decreases in the order tribromomethyl > dibromofluoromethyl > dibromomethyl > bromofluoromethyl > bromomethyl. The presence of fluorine at either the same or an adjacent carbon tends to retard the substitution. Bromine trifluoride is more effeetive than antimony fluorides as it replaces bromine in bromodifluoromethyl and bromomethyl groups. 

---