HPLC high performance liquid temperature

HDT heat distortion temperature HPLC high-performance liquid chromatog-... 

In addition to GC/MS, high performance liquid chromatography (HPLC/MS) has been used to analyse natural resins in ancient samples, particularly for paint varnishes containing mastic and dammar resins [34]. A partial limitation of chromatographic techniques is that they do not permit the analysis of the polymeric fraction or insoluble fraction that may be present in the native resins or formed in the course of ageing. Techniques based on the direct introduction of the sample in the mass spectrometer such as direct temperature resolved mass spectrometry (DTMS), direct exposure mass spectrometry (DE-MS) and direct inlet mass spectrometry (DI-MS), and on analytical pyrolysis (Py-GC/MS), have been employed as complementary techniques to obtain preliminary information on the... 

High Performance Liquid Chromatography (HPLC) (Chapter 30) gives an elaborate discussion of theoretical aspects. Instrumentation encompasses the various important components e.g., solvent reservoir and degassing system pressure, flow and temperature pumps and sample injection system ... 

Nitrobenzene oxidation was carried out by adding 50 mg of dry soda lignin into a mixture of 7 mL of 2 M NaOH and 4 ttiL of nitrobenzene in a 15 ttiL steel autoclave. Then, the antoclave was heated to 165°C for 3 hours in a preheated thermostat oil bath. After the autoclave was cooled to room temperature, the mixture was then transferred to a liqnid-hquid extractor for continuous extraction with chloroform (5 x 20 mL) in order to remove any nitrobenzene reduction product and excess nitrobenzene. The oxidation mixtnre was then acidified by concentrated HCl to pH 3 and further extracted with chloroform (5x15 mL). The solvent from the second chloroform solution was then removed using a rotary evaporator at 40°C under reduced pressure in order to obtain the nitrobenzene oxidation mixture. The mixture was then dissolved into dicloromethane and made up to 10 luL. This mixture was then used as a stock solution for high performance liquid chromatography (HPLC) analysis [6]. 

Assay of the reaction mixture. The samples were then resuspended in 1.5 mL isopropanol and assayed to determine both the yield and ee by chiral normal phase high-performance liquid chromatography (HPLC). A 250 mm x 4.6 mm Chiralpak AD-H column was used with an eluant of 95 5 heptane/ethanol, a flow rate of 3 mL min a temperature of 10 °C and a detection wavelength of 210 nm. 

A gas chromatograph with a capillary column coupled to a mass spectrometer is an ideal analytical partnership. Effluent from the column has an elevated temperature and the molecules of interest are in a vapor state and ready to enter the ion source. This eliminates the need for desolvation that is required in high-performance liquid chromatography (HPLC)-MS. 

J.K. Swadesh, Temperature control in analytical high-performance liquid chromatography. In E. Katz (Ed.), Handbook of HPLC, Marcel Dekker, New York, 1998, pp. 607-615. 

Rao et al. reported a high performance liquid chromatographic method to determine diloxanide furoate and metronidazole in single and in combined dosage forms [41]. A 30 mg equivalent of diloxanide furoate and 25 mg of metronidazole (either as the bulk drug substances or in powdered tablets) was dissolved in methanol, amidopyrine added as the internal standard, and the mixture analyzed by HPLC at room temperature. The analytical column (30 cm x 3.9 mm) consisted of p-Bondapak Cig, with 9 9 1 1 methanol water 0.05 M KH2PO4 0.05 M NaH2P04 as the mobile phase. The flow rate was 1 mL/min), and detection was performed at 254 nm. 

High-performance liquid chromatography (HPLC) is one of the premier analytical techniques widely used in analytical laboratories. Numerous analytical HPLC analyses have been developed for pharmaceutical, chemical, food, cosmetic, and environmental applications. The popularity of HPLC analysis can be attributed to its powerful combination of separation and quantitation capabilities. HPLC instrumentation has reached a state of maturity. The majority of vendors can provide very sophisticated and highly automated systems to meet users needs. To provide a high level of assurance that the data generated from the HPLC analysis are reliable, the performance of the HPLC system should be monitored at regular intervals. In this chapter some of the key performance attributes for a typical HPLC system (consisting of a quaternary pump, an autoinjector, a UV-Vis detector, and a temperature-controlled column compartment) are discussed [1-8]. 

To suppress enamine-derived side products, we explored addition of benzotriazole (BtH) to the reaction mixture. The premise behind these experiments was the ability of BtH to form stable adducts with imines,23,24 thereby blocking tautomerization of 19 to 20 through in situ formation of the benzotriazolyl derivative 21. It was hoped that subsequent hydride displacement of the Bt moiety would afford the desired mono alkylated products 23. Indeed, analytical high-performance liquid chromatography (HPLC) revealed a remarkable improvement in terms of product purity, especially for reactions carried out at room temperature, with the desired secondary anilines 23 being essentially the only products detected. In... 

---