HPLC high performance liquid introduction

In addition to GC/MS, high performance liquid chromatography (HPLC/MS) has been used to analyse natural resins in ancient samples, particularly for paint varnishes containing mastic and dammar resins [34]. A partial limitation of chromatographic techniques is that they do not permit the analysis of the polymeric fraction or insoluble fraction that may be present in the native resins or formed in the course of ageing. Techniques based on the direct introduction of the sample in the mass spectrometer such as direct temperature resolved mass spectrometry (DTMS), direct exposure mass spectrometry (DE-MS) and direct inlet mass spectrometry (DI-MS), and on analytical pyrolysis (Py-GC/MS), have been employed as complementary techniques to obtain preliminary information on the... 

Sample preparation for analysis by hyphenated methods requires some additional planning when compared to nonhyphenated methods. All steps, extraction, concentration, and final solvent selection must take into consideration and be compatible with all the components of the hyphenated instrumentation. For gas chromatographic methods, all the components in the mixture must be in the gaseous state. For liquid chromatography (LC) or high-performance liquid chromatography (HPLC), the samples of the analytes of interest can be solids or liquids, neutral or charged molecules, or ions, but they must be in solution. If the follow-on analysis is by MS, then each of the analytes may require a different method of introduction into the MS. Metals and metal ions may be introduced by HPLC if they are in solution but commonly are introduced via AAS or inductively coupled plasma (ICP). Other analytes may be directly introduced from HPLC to MS [2],... 

Whilst these methods are informative for the characterisation of synthetic mixtures, the information gained and the nature of these techniques precludes their use in routine quantitative analysis of environmental samples, which requires methods amenable to the direct introduction of aqueous samples and in particular selective and sensitive detection. Conventionally, online separation techniques coupled to mass spectrometric detection are used for this, namely gas (GC) and liquid chromatography (LC). As a technique for agrochemical and environmental analyses, high performance liquid chromatography (HPLC) coupled to atmospheric pressure ionisation-mass spectrometry (API-MS) is extremely attractive, with the ability to analyse relatively polar compounds and provide detection to very low levels. 

E. Katz, Editor, High Performance Liquid Chromatography (1995), John Wiley Sons (United Kingdom). A modem introduction to HPLC. 

The importance of the introduction of high performance liquid chromatography (hplc) to studies in the life sciences is now widely recognized. Since its introduction, this method has been rapidly accepted by biochemists and more recently by biologists and clinicians. Such rapid acceptance should not be surprising, since advances in separation and analysis. have usually been readily assimilated. 

The recent popularity of HPLC as an analytical technique in biochemical and biomedical research can be attributed to the development and introduction of microparticulate reversed-phase packings in which the hydrocarbon chain (octadecyl-, ocyl-, or di-) moieties are chemically bonded to a silica base (K5). At the present time, it is estimated that approximately 80% of all HPLC separations are performed in the reversed-phase mode. Reversed-phase high-performance liquid chromatography (RPLC) has many advantages over other modes of HPLC ... 

A variety of MS formats are widely accepted and applied in the pharmaceutical industry. The specific MS application is often defined by the sample introduction technique. The pharmaceutical applications highlighted in this article feature two types of sample introduction techniques dynamic and static. Dynamic sample introduction involves the use of high-performance liquid chromatography (HPLC) on-line with MS. The resulting liquid chromatography/mass spectrometry (LC/MS) format provides unique and enabling capabilities for pharmaceutical analysis. The electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) modes are the most widely used. Static sample introduction techniques primarily use matrix-assisted laser desorption/ionization (MALDI). ... 

---