High sulphidation

O Brien, S.J., Dube, B. and O Driscoll C.F. (1999) High-Sulphidation, Epithermal-Style Hydrothermal Systems in Late Neoproterozoic Avalonian rocks on the Burin Peninsula, Newfoundland Implications for Gold Exploration Report 99-1, Current Research Newfoundland Department of Mines and Energy Geological Survey, pp. 275-96. 

Finally, we wiU consider the relation between the sulphide capasity of molten slags and the present calcvdation. The sulphide capacity is the solubility of sulphur atoms into molten slags from molten irons. Sulphur make irons brittle. Therefore, it is necessary for molten slags to have the high sulphide capacity in order to produce high performance irons. 

Gases which are high in FIjS are subject to a de-sulphurisation process in which H2S is converted into elemental sulphur or a metal sulphide. There are a number of processes based on absorption in contactors, adsorption (to a surface) in molecular sieves or chemical reaction (e.g. with zinc oxide). 

Ozone is very much more reactive than oxygen and is a powerful oxidising agent especially in acid solution (the redox potential varies with conditions but can be as high as + 2.0 V). Some examples are 1. the conversion of black lead(ll) sulphide to white lead(II) sulphate (an example of oxidation by addition of oxygen) ... 

Anhydrous sodium sulphide. The hydrated salt, NajS.QH O, is heated in a Pyrex distilling flask or retort in a stream of hydrogen or of nitrogen until water ceases to be evolved. The solid cake of anhydrous sodium sulphide is removed from the vessel with the aid of a copper wire hook or by other suitable means. No attempt should be made to fuse the sodium sulphide since at high temperatiues sodium sulphide is readily oxidised to sodium sulphate. 

The reaction of metals with gas mixtures such as CO/CO2 and SO2/O2 can lead to products in which the reaction of the oxygen potential in the gas mixture to form tire metal oxides is accompanied by the formation of carbon solutions or carbides in tire hrst case, and sulphide or sulphates in the second mixture. Since the most importairt aspects of this subject relate to tire performairce of materials in high temperature service, tire reactions are refeiTed to as hot corrosion reactions. These reactions frequendy result in the formation of a liquid as an intermediate phase, but are included here because dre solid products are usually rate-determining in dre coiTosion reactions. 

The presence of the either linkages is sufficient to allow the material to be melt processed, whilst the polymer retains many of the desirable characteristics of polyimides. As a consequence the material has gained rapid acceptance as a high-temperature engineering thermoplastics material competitive with the poly-sulphones, poly(phenylene sulphides) and polyketones. They exhibit the following key characteristics ... 

The polyetherimides are competitive not only with other high-performance polymers such as the polysulphones and polyketones but also with polyphenylene sulphides, polyarylates, polyamide-imides and the polycarbonates. 

As with the polysulphones, the deactivated aromatic nature of the polymer leads to a high degree of oxidative stability, with an indicated UL Temperature Index in excess of 250°C for PEEKK. The only other melt-processable polymers in the same league are poly(phenylene sulphides) and certain liquid crystal polyesters (see Chapter 25). 

Alkyl sulphides are the sulphur analogues of ethers from which they differ considerably in chemistry. They are unpleasant-smelling oils, insoluble in water but soluble in organic solvents. They tend to be comparatively inert. Mustard gas, CICH2CH2—S—CH2CH2CI, an oily liquid boiling at 216°C with a mustard-like smell, is highly poisonous and a vesicant, and for this reason found use in chemical warfare. 

Segregate eylinders of hydrogen sulphide from oxygen or other highly-oxidizing or eombustible materials. 

LPG is considered to be non-toxic witli no chronic effects, but the vapour is slightly anaesthetic. In sufficiently high concentrations, resulting in oxygen deficiency, it will result in physical asphyxiation. The gases are colourless and odourless but an odorant or stenching agent (e.g. methyl mercaptan or dimethyl sulphide) is normally added to facilitate detection by smell down to approximately 0.4% by volume in air, i.e. one-fifth of the lower flammable limit. The odorant is not added for specific applications, e.g. cosmetic aerosol propellant. 

The product crystals find industrial application as a component raw material for optical glass, fibreglass, Braun tubes, electric condensers, barium ferrite, etc. Needles shaped crystals are obtained at high pH, while pillar-shaped crystals are formed at neutral pH. The formation of carboxyl ions is via hydroxy ions at high pH, but at neutral pH it may accompany the production of hydrogen sulphide, as... 

Other chemicals Copper and copper alloys are unsuitable for handling hydrogen peroxide " or molten sulphur . Hydrogen sulphide accelerates corrosion of most copper-base materials. In its presence brasses high in zinc are usually found to behave better than other copper alloys. ... 

Niobium like tantalum relies for its corrosion resistance on a highly adherent passive oxide film it is however not as resistant as tantalum in the more aggressive media. In no case reported in the literature is niobium inert to corrosives that attack tantalum. Niobium has not therefore been used extensively for corrosion resistant applications and little information is available on its performance in service conditions. It is more susceptible than tantalum to embrittlement by hydrogen and to corrosion by many aqueous corrodants. Although it is possible to prevent hydrogen embrittlement of niobium under some conditions by contacting it with platinum the method does not seem to be broadly effective. Niobium is attacked at room temperature by hydrofluoric acid and at 100°C by concentrated hydrochloric, sulphuric and phosphoric acids. It is embrittled by sodium hydroxide presumably as the result of hydrogen absorption and it is not suited for use with sodium sulphide. 

Mrowec et examined the resistance to high-temperature corrosion of Fe alloys with Cr contents between 0.35 and 74 at% Cr in 101 kPa S vapour. They found that the corrosion was parabolic, irrespective of the temperature or alloy composition, and noted that sulphidation takes place at a rate five orders of magnitude greater than oxidation at equivalent temperatures. At less than 2% Cr, the alloys formed Fe, j.,S growing by outward diffusion of Fe ions, with traces of FeCr2S4 near the metal core. 

---