Graft Polymers and Copolymers

This principle is applied not only to the PVA-PVAc composites but to other polymer composites. The composite structure does not always need to be porous but may be powders and gels designed for the wettability by solvents and the extension of the surface area in soluble polymers. From this point-of-view, the present work sheds a new light on the research on composite materials related to graft polymers and copolymers. 

In the past few years several radiation-chemical methods have been developed for the preparation of graft polymers and copolymers. These radiation chemical methods are much easier to handle than... 

Graft polymers and copolymers of the rigid rod liqnid crystalline poly(p-phenylene sulfonic acid),... 

In addition to providing fully alkyl/aryl-substituted polyphosphasenes, the versatility of the process in Figure 2 has allowed the preparation of various functionalized polymers and copolymers. Thus the monomer (10) can be derivatized via deprotonation—substitution, when a P-methyl (or P—CH2—) group is present, to provide new phosphoranimines some of which, in turn, serve as precursors to new polymers (64). In the same vein, polymers containing a P—CH group, for example, poly(methylphenylphosphazene), can also be derivatized by deprotonation—substitution reactions without chain scission. This has produced a number of functionalized polymers (64,71—73), including water-soluble carboxylate salts (11), as well as graft copolymers with styrene (74) and with dimethylsiloxane (12) (75). 

At one time butadiene-acrylonitrile copolymers (nitrile rubbers) were the most important impact modifiers. Today they have been largely replaced by acrylonitrile-butadiene-styrene (ABS) graft terpolymers, methacrylate-buta-diene-styrene (MBS) terpolymers, chlorinated polyethylene, EVA-PVC graft polymers and some poly acrylates. 

The synthetic methods of macromolecules having an active pendant group include (1) the transformation reactions of polymer and copolymers, and (2) polymerization and copolymerization of functional monomers having active pendant groups. The macromolecules, either in the shape of film or microbeads, can be used as the substrate. As we have mentioned previously, the rate of polymerization initiated with the Ce(IV) ion redox system is much faster than that initiated by Ce(l V) ion alone, as expressed in / r 1. Therefore, the graft... 

In summary, these exploratory data suggest that the chromatographic method used could be a valuable tool for study of this polymerization reaction. Reasonable data were obtained for amount and composition of the copolymer. Formation of graft polymer and/or nitrile rich polymer was detected. More detailed chromatographic study of this batch polymerization could lead to a practical on-line monitoring method... 

A dense polymer brush is obtained using the grafting from techniques. Surface-initiated polymerization in conjunction with a living polymerization technique is one of the most useful synthetic routes for the precise design and functionalization of the surfaces of various solid materials with well-defined polymers and copolymers. Above all, surface-initiated living radical polymerization (LRP) is particularly promising due to its simplicity and versatility and it has been applied for the synthesis of Au NPs. 

Polymer mixtures of aromatic PC, ABS graft polymer and styrene-containing copolymers and monophosphates are described as flameproofing additives (20). It has been claimed that phosphonate amines are superior flame retardants for PC/ABS molding compositions (21). 

A number of well-defined macromonomers differing in the types of the monomer and the end functionality have been made available in these two decades. Their polymerization and copolymerization have provided a relatively easy access to a variety of branched polymers and copolymers, including comb-, star-, brush-, and graft-structures. Progress will no doubt continue to disclose further different types of macromonomers and branched polymers. 

Depending on the nature of the base polymer, chelation reactions can occur either in a homogeneous (soluble linear homo- and copolymers) or heterogeneous (cross-linked, grafted polymers and gels) phases. Consideration of the polymeric nature of the chelating ligand requires a more deliberate, as compared with the LMWM, selection of solvents, pH control and specific synthesis conditions. 

As basic elements we consider monomer 1, monomer 2,. , monomer n, that can be polymerized to form various polymers and copolymers. As the basic operations we designate the following symbols P (polymerization), G (grafting), and C (crosslinking). Polymerization will be assumed to be linear unless operation C is specified. Most important the present group is noncommutative, and the time sequence of events must be preserved. Thus the order of the operations must be maintained. 

Properties of fibers can be altered by carrying out interfacial polymerizations on their surfaces. Thus the shrink resistance of wool can be improved by immersing the fiber first in a solution containing one component of a condensation polymer and then immersing it in another solution containing theother component. Polyamides, polyurethanes, polyureas, and other polymers and copolymers may be grafted on wool in this manner. 

Table I. Fractions of Various Polymers and Copolymers Grafted...

---