Graft impact

By combining the concepts of copolymer homogeneity, matching refractive indices, and partial compatibilization via grafting, impact resistant polyblend systems can be produced from numerous monomer combinations that approach optical clarity. 

In a quite different but very important industrial area, free-radical polymerizations have made great inroads In the optimization of the desired commercial properties of impact-modified poly(vinyl chloride) (PVC). In a most sophisticated variation, grafted impact modifiers based on the quaterpolymerization of acrylic esters, butadiene, styrene, and acrylonitrile have been produced and almost precisely match the refractive index of PVC. The blending of the Impact modifier with PVC yields a completely clear polymer suitable for shampoo bottles and food containers. In addition to excellent clarity these polymers have extremely good impact strength combined with improved fabricability by flow molding equipment. 

Impact polystyrene contains polybutadiene added to reduce brittleness. The polybutadiene is usually dispersed as a discrete phase in a continuous polystyrene matrix. Polystyrene can be grafted onto rubber particles, which assures good adhesion between the phases. 

Thermal Oxidative Stability. ABS undergoes autoxidation and the kinetic features of the oxygen consumption reaction are consistent with an autocatalytic free-radical chain mechanism. Comparisons of the rate of oxidation of ABS with that of polybutadiene and styrene—acrylonitrile copolymer indicate that the polybutadiene component is significantly more sensitive to oxidation than the thermoplastic component (31—33). Oxidation of polybutadiene under these conditions results in embrittlement of the mbber because of cross-linking such embrittlement of the elastomer in ABS results in the loss of impact resistance. Studies have also indicated that oxidation causes detachment of the grafted styrene—acrylonitrile copolymer from the elastomer which contributes to impact deterioration (34). 

MBS polymers are prepared by grafting methyl methacrylate and styrene onto a styrene—butadiene mbber in an emulsion process. The product is a two-phase polymer useful as an impact modifier for rigid poly(vinyl chloride). 

Polystyrene (PS). Common appHcations include packaging, food containers, and disposable tableware toys furniture, appHances, television cabinets, and sports goods and audio and video cassettes. For some of these appHcations, PS is modified by blending or graft polymerization with SBR to form impact polystyrene, which is less sensitive to breakage. Expandable polystyrene is widely used in constmction for thermal insulation. 

Not only ate ABS polymers useful engineering plastics, but some of the high mbber compositions are excellent impact modifiers for poly(vinyl chloride) (PVC). Styrene—acrylonitrile-grafted butadiene mbbers have been used as modifiers for PVC since 1957 (87). 

HIPS = high impact strength polystyrene, a graft copolymer and blend with polybutadiene. 

Two commercially significant graft copolymers are acrylonitrile—butadiene—styrene (ABS) resins and impact polystyrene (IPS) plastics. Both of these families of materials were once simple mechanical polymer blends, but today such compositions are generally graft copolymers or blends of graft copolymers and homopolymers. 

Impact polystyrene (IPS) is one of a class of materials that contains mbber grafted with polystyrene. This composition is usually produced by polymerizing styrene (by mass or solution free-radical polymerization) in the presence of a small amount (ca 5%) of dissolved elastomer. Some of the important producers of impact-resistant polystyrenes are BASE (Polystyrol), Dow (Styron), and Monsanto (Lustrex). The 1988 U.S. production of impact polystyrene was more than 1 million t (92). 

The relative U.S. production of styrene homopolymer and copolymer resins is also noteworthy (103) (Fig. 6). The impact polystyrene (graft and polymer blend) copolymers are produced in nearly the same quantities as styrene homopolymers. The ABS resins are synthesized in lesser, yet significant, quantities. 

Modifications of epichlorohydrin elastomers by radical-induced graft polymeri2ation have been reported. Incorporated monomers include styrene and acrylonitrile, styrene, maleic anhydride, vinyl acetate, methyl methacrylate, and vinyHdene chloride (81), acryHc acid (82), and vinyl chloride (81,83,84). When the vinyl chloride-modified epichlorohydrin polymers were used as additives to PVC, impact strength was improved (83,84). 

Modified nylons are blends of nylon resins and specially grafted nylon resins. In the Du Pont family of Zytel resin, certain blends have been designated Supertough to emphasize the improvement in impact that blends provide over standard resins. General Electric s Noryl GTX resins consist of a nylon matrix resin and a PPO resin in dispersed form. A highly sophisticated blend, it maintains a filled nylon s HPT with no sacrifice of impact resistance. 

At one time butadiene-acrylonitrile copolymers (nitrile rubbers) were the most important impact modifiers. Today they have been largely replaced by acrylonitrile-butadiene-styrene (ABS) graft terpolymers, methacrylate-buta-diene-styrene (MBS) terpolymers, chlorinated polyethylene, EVA-PVC graft polymers and some poly acrylates. 

In addition to acting as impact modifiers a number of polymeric additives may be considered as processing aids. These have similar chemical constitutions to the impact modifiers and include ABS, MBS, chlorinated polyethylene, acrylate-methacrylate copolymers and EVA-PVC grafts. Such materials are more compatible with the PVC and are primarily included to ensure more uniform flow and hence improve surface finish. They may also increase gelation rates. In the case of the compatible MBS polymers they have the special function already mentioned of balancing the refractive indices of the continuous and disperse phases of impact-modified compound. 

This chapter has so far dealt with the major fields of use of vinyl chloride polymers, namely plasticised PVC homopolymer, unplasticised PVC, including impact-modified grades, and copolymers particular based on vinyl acetate. There are, however, five particular special forms of vinyl chloride polymer which merit separate consideration, namely crystalline PVC, after-chlorinated PVC (often known as CPVC) and certain graft copolymers and two vinyl-chloride-based copolymers. 

Today the common practice is first to dissolve the rubber in the styrene monomer and then to polymerise the styrene in the usual way. By this process the resultant blend will contain not only rubber and polystyrene but also a graft polymer where short styrene side chains have been attached to the rubber molecules. This gives a marked improvement in the impact strengths that can be obtained. 

As with poly(ethylene terephthalate) PBT-based copolymers have been introduced to overcome some of the deficiencies of the homopolymer. For example, the rather low notched impact strength of unreinforced grades has been overcome by partial replacement of the terephthalic acid with a longer chain aliphatic dicarboxylic acid. Improved toughness has also been obtained by grafting about 5% of ethylene and vinyl acetate onto the polyester backbone. 

---