Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Functioning conditions

A series of orienting experiments have been carried out to find suitable conditions for the synthesis of CISi-PaMeSt with desired molecular weight and terminal functionality. Conditions and results are shown in Table 3. [Pg.17]

An arrhythmia may occur as a result of heart disease or from a disorder that affects cardiovascular function. Conditions such as emotional stress, hypoxia, and electrolyte imbalance also may trigger an arrhythmia An electrocardiogram (ECG) provides a record of the electrical activity of the heart. Careful interpretation of the ECG along with a thorough physical assessment is necessary to determine the cause and type of arrhythmia The goal of antiarrhythmic drug therapy is to restore normal cardiac function and to prevent life-threatening arrhythmias. [Pg.367]

If the mathematical model of the process under consideration is adequate, it is very reasonable to assume that the measured responses from the i,h experiment are normally distributed. In particular the joint probability density function conditional on the value of the parameters (k and ,) is of the form,... [Pg.15]

If a fuze is in a functioning condition when it leaves the bore of gun, no explosive elements beyond the last safety device of the fuze shall function before or as a result of impact with the target. A complete description of the procedure is given as Test No 207 in MIL-STD-331... [Pg.1096]

This is termed a memoryless non-linearity since the output is a function of only the present value of the input s[n The expression may be regarded as a power series expansion of the non-linear input-output relationship of the non-linearity. In fact this representation is awkward from an analytical point of view and it is more convenient to work in terms of the inverse function. Conditions for invertibility are discussed in Mercer [Mercer, 1993],... [Pg.394]

As condensation on the walls calls for supplementary evaporation, a thin wall is advisable. Most chambers are built of glass or semirigid plastic. These materials are thick, have low heat conductivity and high specific heat, as easily observed from the profuse condensation which runs in heavy drops from the wall. A thin transparent plastic sheet (PI) is a far cheaper cover and easy to handle. Only a very fine mist condenses on the sheet, and the possibility of using a high current density without the need for any cooling is proof of good functional conditions. [Pg.109]

The postoperative phase is characterized by three important objectives (l.) monitoring the functional condition of the transplanted liver, (2.) adjustment of immunosuppression, and (5.) early detection and treatment of complications. [Pg.876]

The ideal criteria for interpretation of enzymuria [168] include the following (i) to evaluate glomerular function the enzyme should he present in blood, absent in renal tissue and have a molecular size that precludes its filtration (ii) to evaluate tubular reabsorption the enzyme should be present in blood, absent from renal tissue, have a molecular weight that allows it to be freely filtered and be reabsorbed by the tubule and (iii) to evaluate anatomical and functional condition of the tubular epithelium the enzyme should be restricted to the renal tissue. [Pg.108]

Pore structure of zeolites of type Y and pentasil as the function conditions of preparation and methods of modification... [Pg.515]

No proprietary medicinal product may be supplied free of charge or at a price without obtaining an MA beforehand to be issued by the Minister of Public Health on advice of the Technical Committee for proprietary medicinal products. The membership and functioning conditions are established by Order of the Minister of Public Health. [Pg.756]

The appropriate route of nutrition support depends on the functional condition of the patient s gastrointestinal (Gl) tract, risk of aspiration, expected duration of nutrition therapy, and clinical condition. [Pg.2591]

The first term in parentheses in Eq. (3.10a) is precisely the second term in Eq. (37) of Ref. 14. The other terms may be obtained by permutation of a>, - a)2, to3, and — cu0. Note the 8 function condition on co0, which represents the conventional CARS frequency-matching condition. [Pg.457]

A facile synthesis of d,/-vasicine (33 R = H) has been reported.29 Condensation of o-nitrobenzyl chloride with 3-hydroxypyrrolidine gave compound (52). Reduction of the nitro-function (conditions not given) followed by treatment with mercuric acetate-edta gave vasicine (33 R = H) and not the other possible cyclization product (53). [Pg.92]

Because local-scaling transformations preserve the orthonormality of basis functions, condition (54) is immediately fulfilled. Hamiltonian orthogonality (Eq. (55)), however, is not satisfied. For this reason, one must solve the eigenvalue equation (51]... [Pg.92]

The optimal functioning conditions for these preliminary prototypes correspond to an HV value of 1.8 kV and peptide solutions at 5-10 pM which is still far away from the targeted conditions for nanoelectrospray applications (lkV, difference between usual nanospray conditions and the functioning regime of these first nib tips was thought to be due to their dimensions. The latter are rather large, 20 pm, comparable to usual nanoESI tips (<10pm). Indeed it is well known that the sensitivity and the analysis quality in ESI-MS are directly linked to the dimensions of the tip 1 the smaller the outlet orifice of the tip, the smaller the droplets, the better the analysis. The... [Pg.104]

However, there are several potential problems to be overcome with patients who smoke and patients with impaired pulmonary function conditions that could affect the kinetics of INH. Previously, it has been demonstrated that smoking as well as chronic obstructive lung disease can increase pulmonary absorption of INH whereas asthma decreases it. Mild to moderate cough is seen with INH... [Pg.50]


See other pages where Functioning conditions is mentioned: [Pg.17]    [Pg.262]    [Pg.20]    [Pg.56]    [Pg.257]    [Pg.142]    [Pg.92]    [Pg.96]    [Pg.27]    [Pg.31]    [Pg.36]    [Pg.190]    [Pg.323]    [Pg.423]    [Pg.75]    [Pg.763]    [Pg.1909]    [Pg.1909]    [Pg.28]    [Pg.334]    [Pg.104]    [Pg.364]    [Pg.636]    [Pg.140]    [Pg.253]    [Pg.333]    [Pg.367]    [Pg.272]    [Pg.841]    [Pg.389]    [Pg.481]    [Pg.156]   
See also in sourсe #XX -- [ Pg.334 ]




SEARCH



Conditional distribution function

Conditional solvation and the pair correlation function

Density functional theory conditions

Density functional theory consistency conditions

Etch Factor as a Function of Process Conditions

Frequency function conditional

Functional evaluation by visual condition survey

Gibbs Function as a Condition for Spontaneous Reaction

Green’s functions boundary conditions

Number density function conditional

Orthogonal Functions and Sturm-Liouville Conditions

Particle Size as a Function of Operating Conditions

Phase function normalization condition

Phase-space conditional probability density function

Probability function conditional

Probability-density functions conditioned

Riemann Conditions and Analytic Functions

Spline function natural condition

Stability analysis using describing function conditional

Stream function boundary conditions

Stream function conditions

Wave function conditions

Wave function scattering boundary conditions

© 2024 chempedia.info