Fourier-transform infrared spectroscopy results

The role of specific interactions in the plasticization of PVC has been proposed from work on specific interactions of esters in solvents (eg, hydrogenated chlorocarbons) (13), work on blends of polyesters with PVC (14—19), and work on plasticized PVC itself (20—23). Modes of iateraction between the carbonyl functionaHty of the plasticizer ester or polyester were proposed, mostly on the basis of results from Fourier transform infrared spectroscopy (ftir). Shifts in the absorption frequency of the carbonyl group of the plasticizer ester to lower wave number, indicative of a reduction in polarity (ie, some iateraction between this functionaHty and the polymer) have been reported (20—22). Work performed with dibutyl phthalate (22) suggests an optimum concentration at which such iateractions are maximized. Spectral shifts are in the range 3—8 cm . Similar shifts have also been reported in blends of PVC with polyesters (14—20), again showing a concentration dependence of the shift to lower wave number of the ester carbonyl absorption frequency. 

One of the major obstacles to investigating ultrathin polymer films is the small amount of detectable sample material and, as a result, high instrument sensitivity is crucial. Although polarized Fourier Transform Infrared Spectroscopy (13.141 has... 

In order to learn about the phase states adopted by LPS and lipid A, Fourier-transform infrared spectroscopy, differential scanning calorimetry, and X-ray small-angle diffraction with CuXa or synchrotron radiation have been applied. In the following section, some recent results are summarized. 

A Fourier transform infrared spectroscopy spectrometer consists of an infrared source, an interference modulator (usually a scanning Michelson interferometer), a sample chamber and an infrared detector. Interference signals measured at the detector are usually amplified and then digitized. A digital computer initially records and then processes the interferogram and also allows the spectral data that results to be manipulated. Permanent records of spectral data are created using a plotter or other peripheral device. 

Spectroscopic techniques may provide the least ambiguous methods for verification of actual sorption mechanisms. Zeltner et al. (Chapter 8) have applied FTIR (Fourier Transform Infrared) spectroscopy and microcalorimetric titrations in a study of the adsorption of salicylic acid by goethite these techniques provide new information on the structure of organic acid complexes formed at the goethite-water interface. Ambe et al. (Chapter 19) present the results of an emission Mossbauer spectroscopic study of sorbed Co(II) and Sb(V). Although Mossbauer spectroscopy can only be used for a few chemical elements, the technique provides detailed information about the molecular bonding of sorbed species and may be used to differentiate between adsorption and surface precipitation. 

Most earlier papers dealt with the mercury electrode because of its unique and convenient features, such as surface cleanness, smoothness, isotropic surface properties, and wide range of ideal polarizability. These properties are gener y uncharacteristic of solid metal electrodes, so the results of the sohd met electrolyte interface studies are not as explicit as they are for mercury and are often more controversial. This has been shown by Bockris and Jeng, who studied adsorption of 19 different organic compounds on polycrystaUine platinum electrodes in 0.0 IM HCl solution using a radiotracer method, eUipsometry, and Fourier Transform Infrared Spectroscopy. The authors have determined and discussed adsorption isotherms and the kinetics of adsorption of the studied compounds. Their results were later critically reviewed by Wieckowski. ... 

Oxidation of thiourea adsorbed on Au(lll) and pc-Au electrode in 0.1 M HCIO4 has been investigated using CV, in situ Fourier transform infrared spectroscopy, and differential electrochemical mass spectrometry [165]. Two reaction mechanisms were proposed for the oxidation of the adsorbed and nonadsorbed thiourea. For both types of Au electrodes, similar results were obtained. 

Because of this mathematical step, the technique is usually called Fourier transform infrared spectroscopy or FTIR spectroscopy. The Fourier transformation is a mathematical procedure that enables one to convert from the results of an interfero-gram back to intensities of a given wavelength. It is performed in a computer connected to the spectrometer. The result is the absorption spectrum of the sample, that is, the intensity of the absorbance as a function of the wavenumbers. 

Even though these approaches are powerful methods for determining functional sites on proteins, they are limited if not coupled with some form of structural determination. As Figure 2 illustrates, molecular biology and synthetic peptide/antibody approaches are not only interdependent, they are tied in with structural determination. Structural determination methods can take many forms, from the classic x-ray crystallography and NMR for three-dimensional determination, to two-dimensional methods such as circular dichroism and Fourier Transformed Infrared Spectroscopy, to predictive methods and modeling. A structural analysis is crucial to the interpretation of experimental results obtained from mutational and synthetic peptide/antibody techniques. 

In conclusion, the analysis of spectra properly recorded to 185 nm, or lower where possible, can give useful estimates of secondary structure content, but the content of turns and of P-structure should be interpreted with caution. Fourier transform infrared spectroscopy (FTIR) provides better estimates of the latter. When using the results of far-UV CD determination to characterize reproducibility of folding for different samples, it is important first to compare the spectra visually and to look for possible trends or factors that may explain small differences, rather than to rely solely on comparison of derived secondary structure contents. 

Regarding the spatial aspects of the enzymatic degradation of CA-g-PLLA, a surface characterization [30] was carried out for melt-molded films by atomic force microscopy (AFM) and attenuated total-reflection Fourier-transform infrared spectroscopy (ATR-FTIR) before and after the hydrolysis test with proteinase K. As exemplified in Fig. 3 for a copolymer of MS = 22, the AFM study showed that hydrolysis for a few weeks caused a transformation of the original smooth surface of the test specimen (Fig. 3a) into a more undulated surface with a number of protuberances of 50-300 nm in height and less than a few micrometers in width (Fig. 3b). The ATR-FTIR measurements proved a selective release of lactyl units in the surface region of the hydrolyzed films, and the absorption intensity data monitored as a function of time was explicable in accordance with the AFM result. 

The remaining useful life evaluation routine (RULER) is a useful monitoring program for used engine oils. The RULER system is based on a voltammetric method (Jefferies and Ameye, 1997 Kauffman, 1989 and 1994). The data allows the user to monitor the depletation of two additives ZDDP and the phenol/amineH+ antioxidant. The RULER results were compared to other standard analytical techniques, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), total base number (TBN), total acid number (TAN), and viscosity to determine any correlation between the techniques (Jefferies and Ameye, 1997 and 1998). The test concluded that the RULER instrument can... 

Fourier transform infrared spectroscopy FT-IR. The measurement of individual degradation products with FT-IR is very simple, quick and precise. A reference sample spectrum of new oil is required to subtract electronically from the oil sample spectrum. The spectra of the fresh oil and the used oil sample are obtained individually in the same cell. The results - both spectra and the "differential" spectrum are stored in the computer in absorbance format, a form that varies linearly with concentration. 

---