Flooring agents

Epoxy compounds, benzyl alcohol, isophoronediamine and formaldehyde were the most frequently registered allergens in flooring agents. An increase in the share of products registered with content of formaldehyde was observed during the study period. 

Styrene—maleic anhydride copolymer [9011-13-6] engineering thermoplastics, paper treatment chemicals, floor poHshes, emulsifiers, protective coUoids, antisoil agents, dispersants... 

Emulsions. The fatty acid soaps of alkanolamines ate excellent emulsification agents for use in such products as floor poHshes, cosmetics, and functional fluids such as hydrauhc and metalworking fluids. For example, improved hardwater stabiUty of a hydrauhc fluid emulsion is obtained using AMP in the formulation (12). 

Because dimethyl sulfate looks like water, operations are preferably not performed when water is present, eg, wet floors or rain. Any spills or leaks should not be left unattended they should be contained, and mnoff to sewers should be avoided. Minor spills should be flooded with water to dilute and hydroly2e the dimethyl sulfate. The area should then be covered with a dilute (2—5 wt %) caustic solution or a dilute (2—5 wt %) ammonia solution, or soda ash may be sprinkled over the neat liquid and the mix wetted with a gende spray of water. The neutrafi2ing agent should remain on the affected area for 24 h and then should be washed away. Only personnel wearing protective equipment should perform these operations. The product bulletins should be consulted for procedures to be followed for more severe spills. Concentrated ammonia should not be used with neat dimethyl sulfate because explosions have resulted after their contact (128). 

Figure 16.16 Schematic diagrams Illustrating the binding of an antiviral agent to human rhlnovirus strain 14. (a) The drug binds in a hydrophobic pocket of VPl below the floor of the canyon, (b) Schematic diagram of VPl Illustrating the pocket in the jelly roll barrel where the drug binds. (Adapted from T.J. Smith et al.. Science 233 1286-1293, 1986.)...

Chemical Reactivity - Reactivity with Water No reaction Reactivity with Common Materials Reacts with organic materials rapidly, generating sufficient heat to cause ignition. Prolonged contact on wood floors can result in a fire hazard Stability During Transport Stable Neutralizing Agents for Acids and Caustics Flood with water and rinse with sodium bicarbonate solution Polymerization Not pertinent Inhibitor of Polymerization Not pertinent. 

Emulsion polymerization is widely used to produce polymers in the form of emulsions, such as paints and floor polishes. It also used to polymerize many water insoluble vinyl monomers, such as styrene and vinyl chloride. In emulsion polymerization, an agent emulsifies the monomers. Emulsifying agents should have a finite solubility. They are either ionic, as in the case of alkylbenzene sulfonates, or nonionic, like polyvinyl alcohol. 

---