Fibre composite parts

S.H. Aziz, M.P. Ansell, The effect of alkalization and fibre alignment on the mechanieal and thermal properties of kenaf and hemp bast fibre composites part 1-polyester resin matrix. Compos. Sci. Technol. 64(9), 1219-1230 (2004)... 

Bledzki, A.K., Jaszkiewicz, A., and Scherzer, D. (2009) Mechanical properties of PLA composites with man-made cellulose and abaca fibres. Composites Part A, 40 (4), 404-412. 

Bogoeva G, Mader E, Elaussler L, Dekanski A, Characteristics of the surface and interphase of plasma treated EIM carbon fibres. Composites Part A—Appl Sci Manuf, 28(5), 445 52, 1997. Kettle AP, Beck AJ, O Toole L, Jones FR, Short RD, Plasma polymerization for molecular engineering of carbon fibre surfaces for optimized composites, Composites Sci Technol, 57(8), 1023-1032, 1997. 

Liu K, Piggott MR, Shear strength of polymers and fibre composites, Part 2 carbon/epoxy pultrusions, Composites, 26(12), 841-848, 1995. 

Mechanical properties of poly(butylene succinate) (PBS) biocomposites reinforced with surface modified jute fibre. Composites Part A,... 

Epoxide resin laminates are of particular importance in the aircraft industry. It has been stated that the Boeing 757 and 767 aircraft use 1800 kg of carbon fibre/ epoxide resin composites for structural purposes per aeroplane. The resin has also been used with Aramid fibres for filament-wound rocket motors and pressure vessels. The AV-18 fighter aircraft is also said to be 18% epoxide resin/cc bon fibre composite. The resins are also widely used both with fibres and with honeycomb structures for such parts as helicopter blades. 

Reprinted from Composites Part A, 33(5),Yu Z B, Thompson D P and Bhatti A R, Fabrication and characterisation of SiC fibre reinforced lithium-a-sialon matrix composites, 621-629 (2002). Copyright 2002, with permission of Elsevier. 

Sambell, R.A.J., Briggs, A., Phillips, D.C. and Bowen, D.H., (1972a), Carbon fibre composites with ceramic and glass matrices, Part I. Discontinuous fibres , J. Mater. Sci., 7, 663-675. 

R. A. J. Sambell, A. Briggs, D. H. Bowen, and D. C. Phillips, Carbon Fibre Composites with Ceramic and Glass Matrices, Part 2 Continuous Fibers, J. Mater. Sci., 7, 676-681 (1972). 

Although the ceramic raw materials have to be transformed into ceramics at relatively high temperatures, particularly silicate ceramic materials require a very low energy consumption for their production (Table 1). Part of the reason for this is that natural raw materials are used, which save energy. On the other hand, the example of carbon-fibre composites shows that high-performance materials can be extremely expensive. 

Cartie DDR, Irving PE. Effect of resin and fibre properties on impact and compression after impact performance of cfrp. Composites Part A 2002 33 483-93. 

Sjogren A, Krasnikov Y, Varsna J. Determination of elastic properties of impact damage in carbon fibre/epoxy laminates. Composites Part A 2001 32(9) 353—60. 

Vo TP, Guan ZW, Cantwell WJ, Schleyer GK. Modelling of the low-impulse blast behaviour of fibre—metal laminates based on different aluminium alloys. Composites Part B 2012 44 141-51. 

Biagiotti, J., Puglia, D., and Kenny Jose, M. A Review on Natural Fibre-Based composites-Part I Structure, Processing and Properties of vegetable Fibres, J. Nat. Fibers, 1(2), 37-68, 2004 Italicized data from McGovern, J.N. Fibers, vegetable. In Polymers— Fibers and Textiles. A compendium. University of Wisconsin, Madison, WI, 1990. 

Biagiotti, J. Puglia, D. Kenny, Jose M. A review on natural fibre-based composites-Part I structure, processing and properties of vegetable fibres. Journal of Natural Fibers, 2004, Vol. 1 Issue 2, pp. 37-68. 

M Simpson, P M Jacobs and F R Jones, Generation of thermal strains in carbon fibre reinforced bismaleimide (PMR-15) composites. Part 3 - a simultaneous thermogravimetric mass spectral study of residual volatiles and thermal microcracking . Composites 1991 22 105. 

Chand, N. Jain, D. (2005). Effect of Sisal Fibre Orientation on Electrical Properties of Sisal Fibre Reinforced Epoxy Composites. Composites Part A, Vol.36, No.5, (May 2005),... 

Maider, E. Jacobasch, H.-J. Grundke, K. Gietzelt, T. (1996). Influence of an Optimized Interphase on the Properties of Polypropylene/Glass Fibre Composites. Composites Part A Applied Science and Manufacturing, Vol.27A No.9, pp. 907-912 ISSN 1359-835X... 

Mader, E. Moos, E. Karger-Kocsis, J. (2001). Role of Film Formers in Glass Fibre Reinforced Polypropylene - New Insights and Relation to Mechanical Properties. Composites Part A Applied Science and Manufacturing, Vol.32, No.5, pp. 631-639 ISSN 1359-835X... 

---