Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Fiber-reinforced green composites

Figure 10.1 Load elongation curve of Eulaliopsis binata fiber-reinforced green composites. Figure 10.1 Load elongation curve of Eulaliopsis binata fiber-reinforced green composites.
Lodha P, Netravali AN. Characterization of stearic acid modified soy protein isolate resin and ramie fiber reinforced green composites. Compos Sci Tech 2005 65 1211-5. [Pg.140]

Ochi, S. and Takagi, H. (2004) Biodegradation behavior of unidirectional fiber reinforced green composites. Zairyo, 53 (4), 454-458. [Pg.463]

Electrophoretic infiltration is a novel technique for the fabrication of fiber reinforced composites used by Kooner et al [234]. The technique involves arranging the fibers as one of the electrodes such that deposition of the colloidal ceramic occurs in the fiber preform. This method was investigated for the carbon fiber reinforced Si3N4 composite system and produced green composite microstruetures with good infiltration uniformity and fiber distribution, with hardly any macro defects. [Pg.617]

A. Hassan, A. A. Salema, EH. Ani, and A.A. Bakar, A review on oil palm empty fruit bunch fiber-reinforced polymer composite materials. Polym. Compos. 31,2079-2101 (2010). R.R. Franck (Ed.), Bast and Other Plant Fibres, p. 397, CRC Press, Boca Raton, FL (2005. A.K. Bledzki, V.E. Sperber, and O. Faruk, Natural and wood fibre reinforcement in polymers, in Rapra Review Reports, Volume 13, pp. 1-144, iSmithers Rapra Publishing (2002). C. Baillie (Ed.), Green Composites Polymer Composites and the Environment, p. 308, Woodhead Publishing Limited, Cambridge, UK (2004). [Pg.471]

Godara A, Raabe D and Green S (2007) The influence of sterilization processes on the micromech-anical properties of carbon-fiber-reinforced PEEK composites for bone implant appbcations, Acta Biomater 3 209-220. [Pg.141]

Several of these modified SPI and SPC resins were used to fabricate fiber, yam and fabric reinforced green composites. The fabrication process and properties of these composites are discussed in the next section. Data for green composites using nanoclay were, however, not available at this time. [Pg.294]

La Mantia FP, Morreale (2011) Green composites a brief review. Compos A 42 579-588 Li Y, Li N, Gao J (2013) Tooling design and microwave curing technologies for the manufacturing of fiber-reinforced polymer composites in aerospace applications. Int J Adv Manuf Technol 70 (l ) 591-606... [Pg.464]

Arrakhiz FZ, Achaby ME, Matha M, Bensalah MO, Fassi F, Bouhfid R, Benmoussa K, Qaiss A (2013) Mechanical and thennal properties of natural fibers reinforced polymer composites doum/low density polyethylene. Mater Des 43 200-205 Baillie C (2004) Green composites polymer composites and the environment. Woodhead Publishing... [Pg.507]

Singha AS, Thakur VK (2009a) Fabrication and characterization of H. Sabdariffa fiber-reinforced green polymer composites. Polym-Plast Technol Eng 48 482-487 Singha AS, Thakur VK (2009b) Fabrication and characterization of S. Cilliare fibre reinforced polymer composites. Bull Mater Sci 32 49-58... [Pg.509]

See other pages where Fiber-reinforced green composites is mentioned: [Pg.387]    [Pg.433]    [Pg.464]    [Pg.447]    [Pg.387]    [Pg.433]    [Pg.464]    [Pg.447]    [Pg.6]    [Pg.390]    [Pg.299]    [Pg.166]    [Pg.354]    [Pg.324]    [Pg.744]    [Pg.28]    [Pg.33]    [Pg.43]    [Pg.418]    [Pg.524]    [Pg.382]    [Pg.73]    [Pg.154]    [Pg.209]    [Pg.292]    [Pg.465]    [Pg.558]    [Pg.4]    [Pg.133]    [Pg.220]    [Pg.292]    [Pg.517]    [Pg.527]    [Pg.354]    [Pg.352]    [Pg.807]   
See also in sourсe #XX -- [ Pg.447 ]



SEARCH



Fiber-reinforced composites

Green Composites

Green composite composites

Green composite fiber composites

Green composition

Green fibers

© 2024 chempedia.info