Facilities, other fuel fabrication

Whether the components are sourced from other facilitates or manufactured within, when the final assembly is complete, the fuel is ready to be shipped to a nuclear power plant and inserted into a reactor during a scheduled refueling outage. Fuel fabrication facilities used for commercial power reactors are large, industrial-scale manufacturing... 

The periodic summary report should also include an interpretation of the results and an adequate explanation of their significance (e.g. with reference to appropriate models or standards or to the uncertainty of the results), especially for results that show significant variations in the releases or in the contamination of the environment. The summary should also include other useful information such as the weather conditions during the reported period and the net electrical energy production (for nuclear power plants) or the quantities of fuel produced (for a fuel fabrication facility) or reprocessed (for a fuel reprocessing plant) in the period concerned. 

DuPont carried out and supported research and development by others focused on conceptual design studies for an NRC licensed fuel recycle complex based on its successful reprocessing experience and lessons learned from that experience and the experience of others. The design studies were completed and reports issued in November 1978. Costs for the 3000 ton/ycar integrated fuel reprocessing/fabrication facility were estimated at 3.7 billion (1978 dollars). Special features ofthis facility design include ... 

Other NFPA documents that are important for specific applications are NFPA 30 (Flammable and Combustible Liquids Code), NFPA 54 (National Fuel Gas Code), NFPA 75 (Standard for the Protection of Information Technology Equipment), and NFPA 318 (Standard for the Protection of Semiconductor Fabrication Facilities). 

Interest in the synthesis and processing of mesoporous silica materials has grown extensively since their discovery in 1992, and the exciting potential that these films hold in low-k dielectrics, sensors, nanowire fabrication, catalysis, membrane separations, and many other applications will continue to fuel academic and industrial interest in these films. While there are many new synthesis routes for processing mesoporous silica thin films, spin coating and dip coating remain the most facile methods available. These methods deliver high quality reproducible films that can be used for any of the variety of applications. 

---