External formats

Let us return to the question of external formation processes for complex molecules. 

An additional factor which can have a pronounced influence on the transition is the presence of a second solute whose oxide has a stability intermediate between that of A and B. If the P02 is great enough to form the oxide of the second solute this will, in effect, decrease the inward flux of oxygen and allow external formation of... 

The transition from the internal to external formation of a protective scale typically occurs after a relatively small increase in the alloy content of the protective-scaleforming element. For instance. Fig. 5-17 compares the cross-sectional micrographs... 

A string-processing language is used to specify a connection table format. This language allows succinct specification of both the content and encoding of most external formats that we have encountered, but is currently Umited to character-oriented files. 

Chemicals are usually stored in computer-readable format as data which represent a valence structure. For historical reasons, the external format for such data is commonly referred to as a connection table. A majority of connection table formats are simply formatted versions of an internal data structure written out in tabular format. However, a significant number of non-tabular formats are used for external computer representation of chemicals. 

ProcGen generates a scaled 3D model of the test specimen geometry, in the form of a faceted boundary representation. This model is made available for use by other software tasks in the system. The STEP file format (the ISO standard for product data exchange) was chosen to provide future compatibility with CAD models produced externally. In particular part 204 (faceted b-rep) of this standard is used. 

Qualitative examples abound. Perfect crystals of sodium carbonate, sulfate, or phosphate may be kept for years without efflorescing, although if scratched, they begin to do so immediately. Too strongly heated or burned lime or plaster of Paris takes up the first traces of water only with difficulty. Reactions of this type tend to be autocat-alytic. The initial rate is slow, due to the absence of the necessary linear interface, but the rate accelerates as more and more product is formed. See Refs. 147-153 for other examples. Ruckenstein [154] has discussed a kinetic model based on nucleation theory. There is certainly evidence that patches of product may be present, as in the oxidation of Mo(lOO) surfaces [155], and that surface defects are important [156]. There may be catalysis thus reaction VII-27 is catalyzed by water vapor [157]. A topotactic reaction is one where the product or products retain the external crystalline shape of the reactant crystal [158]. More often, however, there is a complicated morphology with pitting, cracking, and pore formation, as with calcium carbonate [159]. 

Almost all chemical information systems work with tlicir own special type of connection table. They often use various formats distinguishing between internal and external connection tables. In most cases, the internal connection tables arc redundant, thus allowing maximum flexibility and increasing the speed of data processing. The external connection tables are usually non-redundant in order to save disk space. Although a connection table can be cprcsented in many different ways, the core remains the same the list of atoms and the list of bonds. Thus, the conversion of one connection table format into another is usually a fairly straightforward task. 

The different internal and external file formats make it necessary to have programs which convert one format into another. One of the first conversion programs for chemical structure information was Babel (around 1992). It supports almost 50 data formats for input and output of chemical structure information [61]. CLIFF is another file format converter based on the CACTVS technology and which supports nearly the same number of file formats [29]. In contrast to Babel, the program is more comprehensive it is able to convert chemical reaction information, and can calculate missing atom coordinates [29]. 

It follows therefore that the specific surface of a mesoporous solid can be determined by the BET method (or from Point B) in just the same way as that of a non-porous solid. It is interesting, though not really surprising, that monolayer formation occurs by the same mechanism whether the surface is wholly external (Type II isotherm) or is largely located on the walls of mesopores (Type IV isotherm). Since the adsorption field falls off fairly rapidly with distance from the surface, the building up of the monolayer should not be affected by the presence of a neighbouring surface which, as in a mesopore, is situated at a distance large compared with the size of a molecule. 

In the absence of Fe +, the membrane is colorless, but when immersed in a solution of Fe + and C, the membrane develops a red color as a result of the formation of a Fe +-bathophenanthroline complex. A calibration curve determined using a set of external standards with known molar concentrations of Fe + gave a standardization relationship of... 

Fig. 2. Aerosol emulsion droplets containing propellant (a) in the internal phase with subsequent formation of aerosol foam and (b) in the external phase...

Lasers act as sources and sometimes as amplifiers of coherent k—uv radiation. Excitation in lasers is provided by external particle or photon pump sources. The high energy densities requked to create inverted populations often involve plasma formation. Certain plasmas, eg, cadmium, are produced by small electric discharges, which act as laser sources and amplifiers (77). Efforts that were dkected to the improvement of the energy conversion efficiencies at longer wavelengths and the demonstration of an x-ray laser in plasma media were successful (78). 

The reverse reaction (ion formation) can occur in two ways internally, by attack of the penultimate polymer oxygen atom, or externally, by attack of a monomer oxygen atom (chain growth). The external process is about 10 times slower than the internal process in bulk THF (1). Since ion formation is a slow process compared to ion chain growth, chain growth by external attack of monomer on covalent ester makes a negligible contribution to the polymerization process. 

Radiation Dosimetry. Radioactive materials cause damage to tissue by the deposition of energy via their radioactive emissions. Thus, when they are internally deposited, all emissions are important. When external, only those emissions that are capable of penetrating the outer layer of skin pose an exposure threat. The biological effects of radiation exposure and dose are generally credited to the formation of free radicals in tissue as a result of the ionization produced (17). 

---