Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Evaluation of impact

External cost of damage is where economic valuation of these impacts i.e. external costs and their value is performed [2]. Evaluation of impacts on both the humans and the ecosystem is based on valuation studies, in order to monetize the external effects. [Pg.128]

There was no evaluation of impact of software changes on other parts of the program. [FDA 483, 2003]... [Pg.84]

Dr. Riew has presented more than 50 technical papers and holds more than 25 patents on emulsion polymers, hydrophilic polymers, synthesis and application of telechelic polymers, and toughened plastics for adhesives and composites. His latest research is in the synthesis, characterization, and performance evaluation of impact modifiers for thermosets and engineering thermoplastics. His research interests include correlating polymer chemistry and physics, morphology, engineering, and static and dynamic thermomechanical properties to the failure mechanisms of toughened plastics. [Pg.7]

In addition to the data elements that go into the frequency and consequence analyses detailed above, there are two other categories of data that will be directly discussed. These include the selection and use of meteorological data in the consequence analysis and the population data for the evaluation of impacts. The reader may refer to Chapter 2 of the Guidelines for Chemical Transportation Risk Analysis (CCPS, 1995) for additional information on these data sources as well as any others not exphcitly discussed in this chapter. [Pg.89]

The index approach presented provides a simple strategy for integrated evaluation of impacts on wetlands, using soil biogeochemical processes and parameters as potential indicators. Although... [Pg.594]

Lin, C.C. Yu, K.R Zhao, R Lee, G.W.M. Evaluation of impact factors on VOC emissions and concentrations from wooden flooring based on chamber tests. Build Environ 44 (2009) 525-533. [Pg.1481]

The methodological and scientific framework for impact assessment is still being developed. Models for impact categories are in different stages of development. There is subjectivity in the life cycle impact assessment phase such as the choice, modelling and evaluation of impact categories. Therefore, transparency is critical to impact assessment to ensure that the assumptions are clearly described and reported. [Pg.375]

Jakobsson, L. 2004. Evaluation of impact severity measures for ais 1 neck injuries in frontal impacts using crash recorder data. International Journal of Crashworthiness 9(1), 105-111. [Pg.823]

Beming et al. [58] performed a parametric study using their previously described singlephase, three-dimensional model [55]. The effect of various operational parameters such as the temperature and pressure on the fuel cell performance was investigated. In addition, geometrical and material parameters such as the gas diffusion electrode thickness and porosity as well as the ratio between the channel width and the land area were investigated. It was found that in order to obtain physically realistic results experimental measurements of various modeling parameters were needed. In addition, the contact resistance inside the cell was found to play an important role for the evaluation of impact of such parameters on the fuel cell performance. The impact of liquid water on transport in the gas-diffusion electrode was, however, not account for. [Pg.299]

In this respect, instrumented tests can contribute to better evaluation of impact characteristics, but composite materials may present some problems in reading the initial damage point from the force/deformation curve. [Pg.282]

USEPA. (2004). The Central Appalachian Coal Basin—Attachment 6 Evaluation of Impacts to Underground Sources of Drinking Water by Hydraulic Fracturing of Coalbed Methane Reserves, ERA 816-R-04-003. U.S. Environmental Protection Agency, Washington, DC, 26 pp. [Pg.151]

A statistical analysis of the data and careful interpretation of the results is required in any evaluation of impact strength, because variability or scatter in impact-strength results is the rule rather than the exception. It would not be uncommon, for example, to observe a fourfold difference between the highest and lowest values in a population of 100 TP samples. [Pg.223]

The evaluation of impacts of the dam projects from the 1990 s onwards began by identifying the agricultural gains of those projects. Olofin (2000) listed these gains ... [Pg.1625]

A.R. Beattie, R.A. Abram, P. Seharoch, Realistic evaluation of impact ionisation and Auger recombination rates for the eeeh transition in InSb and InGaAsP. Semicond. Sci. Tech. 5(7),... [Pg.237]

Our inabihty to undertake quantitative evaluations of impacts of competing human nutrition strategies on human food availability is due in large part to the fact that current plant and animal production models are normally restricted to single species and have not been interfaced. ... [Pg.29]

Shailaja, M.S. D Silva, C. 2003. Evaluation of impact of PAH on a tropical fish, Oreochromis mossambicus using multiple biomarkers. Chemosphere, v.53, p.835-841. [Pg.404]


See other pages where Evaluation of impact is mentioned: [Pg.337]    [Pg.127]    [Pg.136]    [Pg.165]    [Pg.131]    [Pg.280]    [Pg.347]    [Pg.68]    [Pg.505]   
See also in sourсe #XX -- [ Pg.17 ]




SEARCH



Impact evaluation

© 2024 chempedia.info