Ethylene-propylene-diene terpolymer polypropylene blends

FIGURE 20.12 (a) Top part shows variations of elastic modulus profile measured in different locations of the polypropylene (PP)-ethylene-propylene-diene terpolymer (EPDM) blend. The locations are shown by white dots in the blend phase image placed at the bottom. Vertical white dashed lines show the components borders and the elastic modulus value for this location. Vertical black dotted lines indicate the locations where elastic modulus E gradually changes between PP (E ) and EPDM (E )- These values are indicated with black arrows on the E axis, (b) LvP curves for PP-matrix, EPDM-domains, and one of interface locations. The approach curves are seen as solid black lines and the retract curves as gray lines. 

Manchado M. A. L., Biagiotti J. and Kenny J. M., Rheological behavior and processability of polypropylene blends with rubber ethylene propylene diene terpolymer. J. Appl. Polym. Sci. 81 (2001) pp. 1-10. 

Study on the blends of ethylene-propylene-diene terpolymer (EPDM) and atactic polypropylene (aPP) reported by Silva et is another case of... 

The choice of date range is arbitrary. The number of journal articles for each year was obtained from a search of electronic version of English-based polymer and polymer-related journals using the keywords polyolefin and blends. Within polyolefin keyword, the subkeywords used in the search were polyethylene (PE, LLDPE, LDPE, HDPE, UHMWPE, PE, etc.), polypropylene (PP, iPP, sPP, aPP, etc.), polybutene-1, poly-4-methylpentene-l, ethylene-diene monomer, ethylene-propylene-diene terpolymer, ethylene propylene rubber, thermoplastic olefins, natural rubber (NR), polybutadiene, polyisobutylene (PIB), polyisoprene, and polyolefin elastomer. For the polyolefin blends patent search, polymer indexing codes and manual codes were used to search for the patents in Derwent World Patent Index based on the above keywords listed in the search strategy. 

Polypropylene/Ethylene-Propylene-Diene Terpolymer Blends... 

Phase Field Approach to Thermodynamics and Dynamics of Phase Separation and Crystallization of Polypropylene Isomers and Ethylene-Propylene-Diene Terpolymer Blends... 

During the last several years, much effort has been spent on developing new materials, based on iPP/elastomers blends. This interest is related to the fact that addition of the rubber phase improves the impact strength of the iPP, The present paper reports on a study of the isothermal crystallization and melting behaviour of thin films of isotactic polypropylene blended with an ethylene--propylene diene terpolymer and three samples of polyisobutylene with different molecular mass. 

The co-continuous structure and the final rheological properties of an immiscible polymer blend are generally controlled by not only the viscoelastic and interfacial properties of the constituent polymers but also by the processing parameters. For example, the effect of plasticizer on co-continuity development in blends based on polypropylene and ethylene-propylene-diene-terpolymer (PP/EPDM), at various compositions, was studied using solvent extraction. The results showed more rapid percolation of the elastomeric component in the presence of plasticizer. However, the same fuUy co-continuous composition range was maintained, as for the non-plasticized counterparts (Shahbikian et al. 2011). It was also shown that the presence of nanoclay narrows the co-continuity composition range for non-plasticized thermoplastic elastomeric materials (TPEs) based on polypropylene and ethylene-propylene-diene-terpolymer and influences their symmetry. This effect was more pronounced in intercalated nanocomposites than in partially exfoliated nanocomposites with improved clay dispersion. It seems that the smaller, well-dispersed particles interfere less with thermoplastic phase continuity (Mirzadeh et al. 2010). A blend of polyamide 6 (PA6) and a co-polyester of... 

Impact properties of polyethylenes, HOPE, LDPE, or LLDPE, were improved by blending them with ethylene-propylene-diene terpolymer, EPDM, and with polypropylene PP, or polybutene, PB H. P. Schreiber, British Patent I, 037,819 1,037,820, 03 Aug 1966, Appl. 1963, to Canadian Industries Ltd. 

An elastomer which upon heating turns into regularly behaving linear polymer. Polystyrene-polybutadiene block copolymers, polypropylene blends with ethylene-propylene-diene terpolymer provide examples. 

Melt blending of polymers is a widely used technique for tailor-making polymeric materials to generate the desired properties. Blending polypropylene block copolymer (PPBC) with elastomeric ethylene-propylene-diene terpolymer (EPDM) produces a range of useful materials commercialized in early 1970 s that found significant uses in the automotive industry. Polyolefin-based bumpers dominate the automobile market in Europe and Japan and have made in-roads in the North American market. In India, the polyolefin blend for car bumpers was commercialized in 1992. 

Acharya et al. [26] and Gcwabaza et al. [28] used XRD to study the effects of nanoclay (OMMT) loading on the morphology of polymer blend nanocomposites for an ethylene propylene diene terpolymer (EPDM)ZEVA and a polypropylene/poly(butylene succinate) (PP/PBS) blend, respectively. Both studies showed an increase in the intensity of the diffraction peak due to nanoclay with an increase in the nanoclay loading, but the location (20) of the peak seems not to be affected by the increase of nanoclay loading. 

A very important thermoplastic elastomer is comprised of a blend of polypropylene (PP) with an ethylene-propylene-diene (EPDM) terpolymer. This latter material is, of course, a crosslinkable thermoset rubber ... 

There are many other commercial examples of polymer blends. Polycarbonate can be blended with an acrylonitrile-butadiene-styrene terpolymer to give a PC-ABS blend. Polypropylene impact can be improved by the addition of ethylene-propylene copolymers, which are sometimes called ethylene-propylene-rubber (EPR). Ethylene, propylene, and a diene monomer (EPDM), such as ethylidene norbomene, is also used to impart impact and flexibiUty to polypropylene. 

---