Ethylene monomers, polymerization

The desired form in homopolymers is the isotactic arrangement (at least 93% is required to give the desired properties). Copolymers have a random arrangement. In block copolymers a secondary reactor is used where active polymer chains can further polymerize to produce segments that use ethylene monomer. 

Peioxydicaibonates are efficient polymerization initiators for most vinyl monomer polymerizations, especially for monomers such as acrylates, ethylene, and vinyl chloride. They are particularly good initiators for less reactive monomers such as those containing aHyl groups. They are also effective for curing of unsaturated polyester mol ding resins. 

The free radical initiators are more suitable for the monomers having electron-withdrawing substituents directed to the ethylene nucleus. The monomers having electron-supplying groups can be polymerized better with the ionic initiators. The water solubility of the monomer is another important consideration. Highly water-soluble (relatively polar) monomers are not suitable for the emulsion polymerization process since most of the monomer polymerizes within the continuous medium, The detailed emulsion polymerization procedures for various monomers, including styrene [59-64], butadiene [61,63,64], vinyl acetate [62,64], vinyl chloride [62,64,65], alkyl acrylates [61-63,65], alkyl methacrylates [62,64], chloroprene [63], and isoprene [61,63] are available in the literature. 

Uses. There are about forty to fifty organic peroxides commercially available in more than seventy formulations designed for specific applications which include (1) initiators for vinyl monomer polymerizations, and copolymerizations of monomers such as vinyl chloride, ethylene, styrene, vinyl acetate, acrylics, fluoroolefms and buta-dienestyrene (2) curing agents for thermoset polyesters, styrenated alkyds and oils, silicone rubbers and poly allyl diglycol carbonates ... 

Ethylene oxide polymerization may be initiated similarly by substances (alcohols, amines, mercaptans) capable of generating a hydroxyl group through reaction with the monomer. In the presence of strongly acidic or basic catalysts, successive addition of ethylene oxide molecules proceeds rapidly in the following manner ... 

The overwhelming majority of synthetic polymers is organic in nature, and it is on these that we will concentrate. The simplest and most common synthetic polymer is polyethylene, which will be our first example. Figure 1.1 shows the basic chemical structure of polyethylene. Pairs of hydrogen atoms are attached to the carbon atoms that make up the backbone. The repeat unit in this structure contains two carbon atoms and is derived from the ethylene monomer. In the case of polyethylene, the number of monomer residues, which is known as the polymerization... 

Addition polymers, which are also known as chain growth polymers, make up the bulk of polymers that we encounter in everyday life. This class includes polyethylene, polypropylene, polystyrene, and polyvinyl chloride. Addition polymers are created by the sequential addition of monomers to an active site, as shown schematically in Fig. 1.7 for polyethylene. In this example, an unpaired electron, which forms the active site at the growing end of the chain, attacks the double bond of an adjacent ethylene monomer. The ethylene unit is added to the end of the chain and a free radical is regenerated. Under the right conditions, chain extension will proceed via hundreds of such steps until the supply of monomers is exhausted, the free radical is transferred to another chain, or the active site is quenched. The products of addition polymerization can have a wide range of molecular weights, the distribution of which depends on the relative rates of chain grcnvth, chain transfer, and chain termination. 

Some of the vinyl monomers polymerized by transition metal benzyl compounds are listed in Table IX. In this table R represents the rate of polymerization in moles per liter per second M sec-1), [M]0 the initial monomer concentration in moles per liter (M) and [C]0 the initial concentration of catalyst in the same units. The ratio i2/[M]0[C]0 gives a measure of the reactivity of the system which is approximately independent of the concentration of catalyst and monomer. It will be observed that the substitution in the benzyl group is able to affect the polymerization rate significantly, but the groups that increase the polymerization rate toward ethylene have the opposite effect where styrene is concerned. It would also appear that titanium complexes are more active than zirconium. The results with styrene and p-bromostyrene suggests that substituents in the monomer, which increase the electronegative character of the double bond, reduces the polymerization rate. The order of reactivity of various olefinically unsaturated compounds is approximately as follows ... 

Monomers, such as ethylene, propylene, isobutylene, and isoprene, containing the carbon-carbon double bond undergo chain polymerization. Polymerization is initiated by radical, anionic or cationic catalysts (initiators) depending on the monomer. Polymerization involves addition of the initiating species R, whether a radical, cation, or anion, to the double bond followed by its propagation by subsequent additions of monomer... 

Olefin polymerization catalysts systems typically experience higher reactivity toward ethylene (monomer 1) than LAOs (monomer 2), resulting in I r2 [37], For our purposes, let us consider a hypothetical example where the catalysts have the following reactivity ratios ... 

Polymerization, the reaction of monomer to produce polymer, may be self-polymerization (e.g., ethylene monomer to produce polyethylene), or copolymerization (e.g.,... 

The low tendency of 1,2-disubstituted ethylenes to polymerize is due to kinetic considerations superimposed on the thermodynamic factor. The approach of the propagating radical to a monomer molecule is sterically hindered. The propagation step is extremely slow because of steric interactions between the P-substituent of the propagating species and the two substituents of the incoming monomer molecule ... 

The transition group compound (catalyst) and the metal alkyl compound (activator) form an organometallic complex through alkylation of the transition metal by the activator which is the active center of polymerization (Cat). With these catalysts not only can ethylene be polymerized but also a-olefins (propylene, 1-butylene, styrene) and dienes. In these cases the polymerization can be regio- and stereoselective so that tactic polymers are obtained. The possibilities of combination between catalyst and activator are limited because the catalytic systems are specific to a certain substrate. This means that a given combination is mostly useful only for a certain monomer. Thus conjugated dienes can be polymerized by catalyst systems containing cobalt or nickel, whereas those systems... 

Well-defined diblock (P—R) and triblock (P R — P) copolymers consisting of the polypropylene block (P) and the ethylene-propylene random copolymer block (R) were prepared by adding ethylene monomer during the living coordination polymerization of propylene with the soluble V(acac)3/Al(C2H5)2Cl/anisole catalyst U1). 

The classical ethylene oxide polymerization may be regarded as an anionic polycondensation in which the monomer is attacked by a nucleophilic group on the end of a growing chain. 

---