Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Ethylene alkylation, stereospecific

Another important use of BCl is as a Ftiedel-Crafts catalyst ia various polymerisation, alkylation, and acylation reactions, and ia other organic syntheses (see Friedel-Crafts reaction). Examples include conversion of cyclophosphasenes to polymers (81,82) polymerisation of olefins such as ethylene (75,83—88) graft polymerisation of vinyl chloride and isobutylene (89) stereospecific polymerisation of propylene (90) copolymerisation of isobutylene and styrene (91,92), and other unsaturated aromatics with maleic anhydride (93) polymerisation of norhornene (94), butadiene (95) preparation of electrically conducting epoxy resins (96), and polymers containing B and N (97) and selective demethylation of methoxy groups ortho to OH groups (98). [Pg.224]

Dialkoxycarbonylation has been reported using a Pd-catalyst/oxidant system on propynols or butynols furnishing respectively /3- or y-lactone derivatives with a-(alkoxycarbonyl)ethylene chains (Scheme 24) [83,137, 138]. This reaction occurs in a stereospecific way leading exclusively to cis-dicarbonylated products in fair to excellent yields (25-97%). Noteworthy, a butynol bearing an alkyl or an aryl substituent instead of a TMS one undergoes a different course of reaction under the same conditions here frans-alkoxycarbonylation takes place selectively (Scheme 25). [Pg.125]

Turro69 has reported that several alkyl ketones react with 1,2-dicyano-ethylene (12) by nucleophilic attack of the ketone (rr, n) singlet state to give oxetanes stereospecifically. Addition of diene quenchers which are known to deactivate ketone triplets do not affect the rate of oxetane formation. This... [Pg.256]

Note that only ca 1% of the titanium atoms introduced with TiCl3 into the system give rise to the formation of surface active sites (since most of the titanium atoms remain inside the solid TiCl3 particles) [40], However, such active sites exhibit rather low stereospecificity in propylene polymerisation. The activity and stereospecificity of catalysts based on the / -TiCl3 modification also depend on the type of alkyl aluminium compound used as the activator. The application of triethylaluminium leads to a catalyst of much higher activity but of much lower stereospecificity, and on account of this diethylaluminium chloride is used for the polymerisation of propylene and other a-olefins, while triethylaluminium (and also triisobutylaluminium) is used for ethylene polymerisation [28],... [Pg.57]

The second approach is a popular route to cationic lanthanide alkyl complexes, which have proven to be the important intermediates for ethylene polymerization and the stereospecific polymerization of diene [5]. Various monocationic lanthanide monoalkyl complexes have been synthesized by the alkyl abstraction/elimination reaction of lanthanide dialkyl complexes. The reaction of a bisbenzyl scandium complex supported by P-diketiminate with B(C6Fs)3 affords the cationic complex with a contact ion pair structure, in which a weak bonding between the cation and the anion exists (Figure 8.21) [77]. The reaction of an amidinate... [Pg.323]

Ziegler catalyst. A type of stereospecific catalyst, usually a chemical complex derived from a transition metal halide and a metal hydride or a metal alkyl. The transition metal may be any of those ingroups IV to VIII of the periodic table the hydride or alkyl metals are those of groups I, II, and III. Typically, titanium chloride is added to aluminum alkyl in a hydrocarbon solvent to form a dispersion or precipitate of the catalyst complex. These catalysts usually operate at atmospheric pressure and are used to convert ethylene to linear polyethylene and also in stereospecific polymerization of propylene to crystalline polypropylene (Ziegler process). [Pg.1342]

Reactions of lithium alkyls are generally considered to be carbanionic in nature, but in reactions with alkyl halides free radicals have been detected by electron spin resonance.32 Lithium alkyls are widely employed as stereospecific catalysts for the polymerization of alkenes, notably isoprene, which gives up to 90% of 1,4-cA-polyisoprene numerous other reactions with alkenes have been studied.33 The TMED complexes again are especially active not only will they polymerize ethylene but they will even metallate benzene and aromatic compounds, as well as reacting with hydrogen at 1 atm to give LiH and alkane. [Pg.204]

IV to VIII metals and base metal alkyls of Group II or III metals (Penczek and Premia, 2012 Boor, 1979 Ciardelli, 1992). It arose from the spectacular discovery of Ziegler et al. (1955) that mixtures of titanium tetrachloride and aluminum alkyls polymerize ethylene at low pressures and temperatures and from the equally spectacular discovery by Natta (1955) that the Ziegler catalysts can stereospecifically polymerize monoolefins to produce tactic, crystalline polymers. As can be imagined, these systems can involve many combinations of catalyst components, not all of which are catalytically active or stereospecific. However, we shall be concerned here only with polymerizations involving the commercial elastomers, principally polyisoprene, polybutadiene (Duck and Locke, 1977 Zohuri et al., 2012 Teyssie et al., 1988), and the ethylene-propylene copolymers (Schobel et al., 2012 Ver Strate, 1986 Davis et al., 1996 Noordermeer, 2003 Baldwin and Strate, 1972). [Pg.80]

Solvents influence the rate of free-radical homopolymerization of acrylic acid and its copolymerization with other monomers. Hydrogen-bonding solvents slow down the reaction rates. Due to the electron-withdrawing nature of the ester groups, acrylic and methacrylic ester polymerize by anionic but not by cationic mechanisms. Lithium alkyls are very effective initiators of a-methyl methacrylate polymerization yielding stereospecific polymers.Isotactic poly(methyl methacrylate) forms in hydrocarbon solvents. Block copolymers of isotactic and syndiotactic poly(methyl methacrylate) form in solvents of medium polarity. Syndiotactic polymers form in polar solvents, like ethylene glycol dimethyl ether, or pyridine. This solvent influence is related to Lewis basicity in the following order ... [Pg.255]


See other pages where Ethylene alkylation, stereospecific is mentioned: [Pg.473]    [Pg.331]    [Pg.87]    [Pg.98]    [Pg.421]    [Pg.668]    [Pg.1545]    [Pg.874]    [Pg.885]    [Pg.102]    [Pg.121]    [Pg.134]    [Pg.239]    [Pg.552]    [Pg.559]    [Pg.562]    [Pg.19]    [Pg.65]    [Pg.257]    [Pg.421]    [Pg.668]    [Pg.679]    [Pg.404]    [Pg.538]    [Pg.775]    [Pg.55]    [Pg.791]    [Pg.187]    [Pg.73]    [Pg.35]    [Pg.294]    [Pg.107]    [Pg.600]    [Pg.155]    [Pg.120]    [Pg.79]    [Pg.563]    [Pg.201]   


SEARCH



Alkyl stereospecific

Alkylation ethylene

© 2024 chempedia.info