Enolates from enol acetates

Although ethereal solutions of methyl lithium may be prepared by the reaction of lithium wire with either methyl iodide or methyl bromide in ether solution, the molar equivalent of lithium iodide or lithium bromide formed in these reactions remains in solution and forms, in part, a complex with the methyllithium. Certain of the ethereal solutions of methyl 1ithium currently marketed by several suppliers including Alfa Products, Morton/Thiokol, Inc., Aldrich Chemical Company, and Lithium Corporation of America, Inc., have been prepared from methyl bromide and contain a full molar equivalent of lithium bromide. In several applications such as the use of methyllithium to prepare lithium dimethyl cuprate or the use of methyllithium in 1,2-dimethyoxyethane to prepare lithium enolates from enol acetates or triraethyl silyl enol ethers, the presence of this lithium salt interferes with the titration and use of methyllithium. There is also evidence which indicates that the stereochemistry observed during addition of methyllithium to carbonyl compounds may be influenced significantly by the presence of a lithium salt in the reaction solution. For these reasons it is often desirable to have ethereal solutions... 

Alkali Metal Enolates from Enol Acetates and Silyl Eru>l Ethers 1.423 Alkali Metal Enolates by Miscellaneous Methods... 

The majority of preparative methods which have been used for obtaining cyclopropane derivatives involve carbene addition to an olefmic bond, if acetylenes are used in the reaction, cyclopropenes are obtained. Heteroatom-substituted or vinyl cydopropanes come from alkenyl bromides or enol acetates (A. de Meijere, 1979 E. J. Corey, 1975 B E. Wenkert, 1970 A). The carbenes needed for cyclopropane syntheses can be obtained in situ by a-elimination of hydrogen halides with strong bases (R. Kdstcr, 1971 E.J. Corey, 1975 B), by copper catalyzed decomposition of diazo compounds (E. Wenkert, 1970 A S.D. Burke, 1979 N.J. Turro, 1966), or by reductive elimination of iodine from gem-diiodides (J. Nishimura, 1969 D. Wen-disch, 1971 J.M. Denis, 1972 H.E. Simmons, 1973 C. Girard, 1974),... 

The isoflavone 406 is prepared by the indirect a-phenylation of a ketone by reaction of phenylmercury(II) chloride with the enol acetate 405, prepared from 4-chromanone[371]. A simple synthesis of pterocarpin (409) has been achieved based on the oxypalladation of the oriho-mercurated phenol derivative 408 with the cyclic alkene 407[372,373]. 

Another preparative method for the enone 554 is the reaction of the enol acetate 553 with allyl methyl carbonate using a bimetallic catalyst of Pd and Tin methoxide[354,358]. The enone formation is competitive with the allylation reaction (see Section 2.4.1). MeCN as a solvent and a low Pd to ligand ratio favor enone formation. Two regioisomeric steroidal dienones, 558 and 559, are prepared regioselectively from the respective dienol acetates 556 and 557 formed from the steroidal a, /3-unsaturated ketone 555. Enone formation from both silyl enol ethers and enol acetates proceeds via 7r-allylpalladium enolates as common intermediates. 

The reactions of ketenes or ketene equivalents with imines, discussed above, all involve the imine acting as nucleophile. Azetidin-2-ones can also be produced by nucleophilic attack of enolate anions derived from the acetic acid derivative on the electrophilic carbon of the imine followed by cyclization. The reaction of Reformatsky reagents, for example... 

Two surprising observations were made in the course of this work first that the enol acetate (5) is stable under the conditions for formation of (6) from (4) second, that the course of the buffered bromination of (5) depends on the conditions used. Thus, in the presence of epichlorohydrin, (7) is the sole isomer produced, whereas in pyridine-acetic acid approximately equal amounts of (7) and (8) are formed. It was suggested that this difference is inherent in the mechanism and not a result of isomerization of (7) to (8) during the course of the reaction. 

In the absence of steric factors e.g. 5 ), the attack is antiparallel (A) (to the adjacent axial bond) and gives the axially substituted chair form (12). In the presence of steric hindrance to attack in the preferred fashion, approach is parallel (P), from the opposite side, and the true kinetic product is the axially substituted boat form (13). This normally undergoes an immediate conformational flip to the equatorial chair form (14) which is isolated as the kinetic product. The effect of such factors is exemplified in the behavior of 3-ketones. Thus, kinetically controlled bromination of 5a-cholestan-3-one (enol acetate) yields the 2a-epimer, (15), which is also the stable form. The presence of a 5a-substituent counteracts the steric effect of the 10-methyl group and results in the formation of the unstable 2l5-(axial)halo ketone... 

The selectivity is probably impaired by bromination at C-2 and C-9. Bromination under buffered conditions of the A -enol acetate prepared from acetic anhydride with perchloric acid catalysis may give better results. See also ref. 55 for a similar bromination. 

The double bond migration which normally occurs on forming ethylene ketals from A -3-ketones has frequently been utilized to form derivatives of the A -system. The related transformation of A -3-ketones into A -3-alcohols is usually accomplished by treatment of the enol acetate (171) (X = OAc) with borohydride. This sequence apparently depends on reduction of the intermediate (172) taking place faster than conjugation ... 

The A" -3-keto system (175) may be obtained directly from the enol acetate ... 

Enol acetates are readily prepared from saturated ketones by reaction with acetic anhydride alone or diluted, in the presence of acetyl chloride ... 

The dimethyl acetal (94) is readily prepared from the 22-aldehyde (93) by direct reaction with methanol in the presence of hydrogen chloride. Ena-mines (95) are formed without a catalyst even with the poorly reactive piperidine and morpholine.Enol acetates (96) are prepared by refluxing with acetic anhydride-sodium acetate or by exchange with isopropenyl acetate in pyridine.Reaction with acetic anhydride catalyzed by boron trifluoride-etherate or perchloric acid gives the aldehyde diacetate. 

Both the Af-fluorosulfonamides and the A -fluoroammonium salts are very effective in the fluormation of enol acetates, enamines, silyl enol ethers, and enolates (Table 2) The reactions are thought to proceed through a mechanism which involves Sf 2 attack on the fluorine atom, but contributions from electron-transfer pathways also exist [65, 68, 73, 75, 76, 79, 80, 81, 82]... 

Nitradon of the potassium enolates of cycloalkanones with pentyl n silyl enol ethers with nitroniiim tetraflnoroborate " provides a method for the preparadon of cydic ct-nitro ketones. Tnflnoroacetyl nitrate generated from tnflnoroacedc anhydnde and ammonium nitrate is a mild and effecdve nitradug reagent for enol acetates fEq. 2.411. ... 

The enol acetates, in turn, can be prepared by treatment of the parent ketone with an appropriate reagent. Such treatment generally gives a mixture of the two enol acetates in which one or the other predominates, depending on the reagent. The mixtures are easily separable. An alternate procedure involves conversion of a silyl enol ether (see 12-22) or a dialkylboron enol ether (an enol borinate, see p. 560) to the corresponding enolate ion. If the less hindered enolate ion is desired (e.g., 126), it can be prepared directly from the ketone by treatment with lithium diisopropylamide in THE or 1,2-dimethoxyethane at —78°C. ... 

Enol (9) comes from available dkione (10) and the synthesis was performed on the enol acetate (11) rather than enol (9). Elimination with strong base gave (6) and the synthesis was completed by Wolf-Kishner removal of the carbonyl group. 

The low-temperature method is effective not only in the kinetic resolution of alcohols but also in the enantioface-selective asymmetric protonation of enol acetate of 2-methylcyclohexanone (15) giving (f )-2-methylcyclohexanone (16). The reaction in H2O at 30°C gave 28% ee (98% conv.), which was improved up to 77% ee (82% conv.) by the reaction using hpase PS-C 11 in /-Pt20 and ethanol at 0°C. Acceleration of the reaction with lipase PS-C 11 made this reaction possible because this reaction required a long reaction time. The temperature effect is shown in Fig. 14. The regular temperature effect was not observed. The protons may be supplied from H2O, methanol, or ethanol, whose bulkiness is important. 

After succeeding in the asymmetric reductive acylation of ketones, we ventured to see if enol acetates can be used as acyl donors and precursors of ketones at the same time through deacylation and keto-enol tautomerization (Scheme 8). The overall reaction thus corresponds to the asymmetric reduction of enol acetate. For example, 1-phenylvinyl acetate was transformed to (f )-l-phenylethyl acetate by CALB and diruthenium complex 1 in the presence of 2,6-dimethyl-4-heptanol with 89% yield and 98% ee. Molecular hydrogen (1 atm) was almost equally effective for the transformation. A broad range of enol acetates were prepared from ketones and were successfully transformed into their corresponding (7 )-acetates under 1 atm H2 (Table 19). From unsymmetrical aliphatic ketones, enol acetates were obtained as the mixtures of regio- and geometrical isomers. Notably, however, the efficiency of the process was little affected by the isomeric composition of the enol acetates. 

---