Energy conversion level

In this paper we present a meaningful analysis of the operation of a batch polymerization reactor in its final stages (i.e. high conversion levels) where MWD broadening is relatively unimportant. The ultimate objective is to minimize the residual monomer concentration as fast as possible, using the time-optimal problem formulation. Isothermal as well as nonisothermal policies are derived based on a mathematical model that also takes depropagation into account. The effect of initiator concentration, initiator half-life and activation energy on optimum temperature and time is studied. 

Fig. 3. Calculated activation energies at different conversion levels of waste PSP.

Singh P, Singh R, Gale R, Rajeshwar K, DuBow J (1980) Surface charge and specific ion adsorption effects in photoelectrochemical devices. J Appl Phys 51 6286-6291 Bard AJ, Bocarsly AB, Pan ERF, Walton EG, Wrighton MS (1980) The concept of Fermi level pinning at semiconductor/liquid junctions. Consequences for energy conversion efficiency and selection of useful solution redox couples in solar devices. J Am Chem Soc 102 3671-3677... 

The band edges are flattened when the anode is illuminated, the Fermi level rises, and the electrode potential shifts in the negative direction. As a result, a potential difference which amounts to about 0.6 to 0.8 V develops between the semiconductor and metal electrode. When the external circuit is closed over some load R, the electrons produced by illumination in the conduction band of the semiconductor electrode will flow through the external circuit to the metal electrode, where they are consumed in the cathodic reaction. Holes from the valence band of the semiconductor electrode at the same time are directly absorbed by the anodic reaction. Therefore, a steady electrical current arises in the system, and the energy of this current can be utilized in the external circuit. In such devices, the solar-to-electrical energy conversion efficiency is as high as 5 to 10%. Unfortunately, their operating life is restricted by the low corrosion resistance of semiconductor electrodes. 

By using a multichamber system [129], exchange of residual gases between successive depositions will be strongly decreased, and very sharp interfaces can be made. Furthermore, the use of a load-lock system ensures high quality of the background vacuum, and thus low levels of contaminants in the bulk layers. Multichamber reactor systems have been used for the fabrication of solar cells, and considerable improvements in energy conversion efficiency have been achieved [130, 131]. 

In the case of 50 kW power, the rate of hydrogen supply needed (LH) is around 1.69 X 103 (mol/h) at the energy-conversion-efficiency level of 45% for the proton exchange membrane fuel cell (PEM-FC) [38]. 

Manipulating surface states of semiconductors for energy conversion applications is one problem area common to electronic devices as well. The problem of Fermi level pinning by surface states with GaAs, for example, raises difficulties in the development of field effect transistors that depend on the... 

F-ATPases (including the H+- or Na+-translocating subfamilies F-type, V-type and A-type ATPase) are found in eukaryotic mitochondria and chloroplasts, in bacteria and in Archaea. As multi-subunit complexes with three to 13 dissimilar subunits, they are embedded in the membrane and involved in primary energy conversion. Although extensively studied at the molecular level, the F-ATPases will not be discussed here in detail, since their main function is not the uptake of nutrients but the synthesis of ATP ( ATP synthase ) [127-130]. For example, synthesis of ATP is mediated by bacterial F-type ATPases when protons flow through the complex down the proton electrochemical gradient. Operating in the opposite direction, the ATPases pump 3 4 H+ and/or 3Na+ out of the cell per ATP hydrolysed. 

In recent years, electrochemical charge transfer processes have received considerable theoretical attention at the quantum mechanical level. These quantal treatments are pivotal in understanding underlying processes of technological importance, such as electrode kinetics, electrocatalysis, corrosion, energy transduction, solar energy conversion, and electron transfer in biological systems. 

Numerous demonstrations in recent years have shown that the level of performance of present-day polymer electrolyte fuel cells can compete with current energy conversion technologies in power densities and energy efficiencies. However, for large-scale commercialization in automobile and portable applications, the merit function of fuel cell systems—namely, the ratio of power density to cost—must be improved by a factor of 10 or more. Clever engineering and empirical optimization of cells and stacks alone cannot achieve such ambitious performance and cost targets. 

---