Enantioselectivity with chiral auxiliaries

Progress has been made toward enantioselective and highly regioselective Michael type alkylations of 2-cyclohexen-l -one using alkylcuprates with chiral auxiliary ligands, e. g., anions of either enantiomer of N-[2-(dimethylamino)ethyl]ephedrine (E. J. Corey, 1986), of (S)-2-(methoxymethyl)pyrrolidine (from L-proline R. K. EHeter, 1987) or of chiramt (= (R,R)-N-(l-phenylethyl)-7-[(l-phenylethyl)iinino]-l,3,5-cycloheptatrien-l-amine, a chiral aminotro-ponimine G. M. Villacorta, 1988). Enantioselectivities of up to 95% have been reported. 

The highest ee s reported to date for the addition of achiral organometallic reagents in the presence of aprotic chiral additives were observed with the C2-symmetric diamines 10, 11 and 12 (Table 25)13 — 15. Enantioselectivities as high as 89% ee were observed with chiral auxiliary 1012. Addition of phenyllithium to pentanal proceeds with lower enantioselection that the analogous addition of butyllithium to benzaldehydeu. Generally, the enantioselcctivity in-... 

Dienes with Chiral Auxiliaries The use of dienes with the chiral auxiliary attached to the C-l position of the dienes is the most popular in asymmetric Diels-Alder reactions.59 In 1980, Trost reported high asymmetric induction in the Diels-Alder reaction using l-(S)-0-methylmandeloxy-l,4-butadiene59a However, the result obtained by Trost et al. has remained unique for more than a decade, at least in terms of enantioselectivity. The asymmetric Diels-Alder reaction of chiral diene-amines with nitroalkenes gives aminocyclohexenes with good diastereoselectivity (Eq. 8.37).60 The development in the area of chiral dienes is slow it may be due to the difficulty of preparing these compounds. 

Chiral amines were always considered important targets for synthetic chemists, and attempts to prepare such compounds enantioselectively date back to quite early times. Selected milestones for the development of enantioselective catalysts for the reduction of C = N functions are listed in Table 34.1. At first, only heterogeneous hydrogenation catalysts such as Pt black, Pd/C or Raney nickel were applied. These were modified with chiral auxiliaries in the hope that some induction - that is, transfer of chirality from the auxiliary to the reactant -might occur. These efforts were undertaken on a purely empirical basis, without any understanding of what might influence the desired selectivity. Only very few substrate types were studied and, not surprisingly, enantioselectivities were... 

Enantioselective Allylations and Crotylations with Chiral Auxiliary... 

The use of ketocarbenoids with chiral auxiliaries has not been terribly effective at chiral induction. Menthol and bomeol esters of diazoacetates resulted in very low enantioselectivity.38 Some improvements were obtained by using the chiral amide (29 equation 13), but low overall yields were obtained due to competing intramolecular side reactions.39 Related studies with other types of carbenoids, however, have resulted in high enantioselectivity.60... 

Asymmetric Mannich reactions provide useful routes for the synthesis of optically active p-amino ketones or esters, which are versatile chiral building blocks for the preparation of many nitrogen-containing biologically important compounds [1-6]. While several diastereoselective Mannich reactions with chiral auxiliaries have been reported, very little is known about enantioselective versions. In 1991, Corey et al. reported the first example of the enantioselective synthesis of p-amino acid esters using chiral boron enolates [7]. Yamamoto et al. disclosed enantioselective reactions of imines with ketene silyl acetals using a Bronsted acid-assisted chiral Lewis acid [8]. In all cases, however, stoichiometric amounts of chiral sources were needed. Asymmetric Mannich reactions using small amounts of chiral sources were not reported before 1997. This chapter presents an overview of catalytic asymmetric Mannich reactions. 

As with acyclic dienes, methods have been developed for enantioselective and diastereoselective complexation of prochiral and chiral cyclic dienes. An approach has been developed for the asymmetric catalytic complexation of prochiral eyelohexa-1,3-dienes nsing (1) in the presence of catalytic amounts of l-azabuta-l,3-dienes such as (232) or (233) an enantiomeric excess as high as 86% has been reported. By contrast, attempts to effect diastereoselective complexations using cyclic diene systems eqnipped with chiral auxiliaries have met with limited success. On the other hand, direct complexation of chiral cyclic dienes snch as (234) and (235) proceed with a high degree of diastereoselectivity, where the iron tricarbonyl fragment is directed syn to alcohols or ethers by transient coordination ( heteroatom dehvery ) (Scheme 66). ... 

Scheme 2.105 Enantioselective perfluoroalkylation [30] using perfluoroalkyl halides with chiral auxiliary groups [31].

Absolute asymmetric synthesis, a rapidly developing field, is a simple approach to the synthesis of enantiomerically pure compounds and has low environmental impact however, enantiomorphic crystals (with a chiral space group) are required, which are not necessarily formed by all compounds with prochiral centers. [2] Enantioselective syntheses with chiral auxiliaries and without biology have been fine-tuned most impressively and have a longer tradition, [3] but are still usually very costly and time-consuming. Several approaches to chemical synthesis may be outlined the synthesis is conducted in chiral media (recently inclusion compounds have been shown to be efficient [4]) or with... 

It is interesting to note that for the assymmetric formation of cyclopropanes of high enantioselectivity, the use of ketocarbenoids with chiral auxiliaries, e. g., diazoacetates as borneol or menthol esters, has been fairly common for a long time. 

Enolates with Chiral Auxiliaries. Enantioselective alkylation of carbonyl derivatives encompassing chiral auxiliaries constitutes an important synthetic process. The anions derived from aldehydes, acyclic ketones, and cyclic ketones with (S)-l-Amino-2-methoxymethylpyrrolidine (SAMP) are used to obtain alkylated products in good to excellent yields and high enan-tioselectivity (e.g. eq 21). ... 

In her review, Laschat summarizes the strategies that have been employed to control stereochemistry. These strategies include diastereo-selectivity from enantiopure starting materials and enantioselectivity with chiral additives. The use of enantiopure starting materials falls into three catagories The controlling stereocenter is in the tether for an intramolecular PKR, the controlling stereocenter is in a chiral auxiliary on the alkyne or alkene, or a chiral cobalt complex controls stereochemistry. 

This overview on the use of metal enolates for catalytic asymmetric aldol reaction may give an impression of the enormous progress in the development made mainly in recent years. Looking back on the aldol addition with chiral auxiliaries and comparing both concepts for this particular valuable reaction, one gets aware that in terms of enantioselectivity and particular simple diastereoselection (i.e., the control of syn- and h -configuration), the excellent traditional auxiliary approaches remain mostly unsurpassed. 

The first practical method for asymmetric epoxidation of primary and secondary allylic alcohols was developed by K.B. Sharpless in 1980 (T. Katsuki, 1980 K.B. Sharpless, 1983 A, B, 1986 see also D. Hoppe, 1982). Tartaric esters, e.g., DET and DIPT" ( = diethyl and diisopropyl ( + )- or (— )-tartrates), are applied as chiral auxiliaries, titanium tetrakis(2-pro-panolate) as a catalyst and tert-butyl hydroperoxide (= TBHP, Bu OOH) as the oxidant. If the reaction mixture is kept absolutely dry, catalytic amounts of the dialkyl tartrate-titanium(IV) complex are suflicient, which largely facilitates work-up procedures (Y. Gao, 1987). Depending on the tartrate enantiomer used, either one of the 2,3-epoxy alcohols may be obtained with high enantioselectivity. The titanium probably binds to the diol grouping of one tartrate molecule and to the hydroxy groups of the bulky hydroperoxide and of the allylic alcohol... 

Solladie-Cavallo has recently reported a two-step asymmetric synthesis of dis-ubstituted N-tosylaziridines from (R,R,R,Ss)-(-)-sulfonium salt 2 (derived from Eliel s oxathiane see Section 1.2.1.1) and N-tosyl imines with use of phosphazine base (EtP2) to generate the ylide (Scheme 1.42) [67], Although the diastereoselectiv-ity was highly substrate-dependent, the enantioselectivities obtained were very high (98.7-99.9%). The chiral auxiliary, although used in stoichiometric quantities, could be isolated and reused, but the practicality and scope of this procedure is limited by the use of the strong - as well as expensive and sensitive - phospha-zene base. 

A remarkable effect of the reaction temperature on the enantioselectivity of the addition of butyllithium to benzaldehyde was found with polystyrene-bound cvs-enofo-S-dimethylamino -(benzyloxy)bornane (8)12. When the soluble monomeric ligand 9 was tested, the enantioselectivity increased with decreasing temperature (53% ee at — 78 C). In contrast, the polymer-bound chiral additive 8 showed an optimum at — 20 C (32% ee). Although the enantioselectivity of this addition reaction is low, an advantage of a polymer-bound chiral auxiliary is that it can be removed by a simple filtration. 

While the mechanism of the ammonium salt catalyzed alkylation is unclear, in polar solvents the enantioselectivity of the addition of dialkylzincs to aldehydes generally drops considerably, probably due to uncatalyzed product formation or complexation of the zinc reagent with the polar solvent rather than with the chiral auxiliary. 

Chiral, nonracemic allylboron reagents 1-7 with stereocenters at Cl of the allyl or 2-butenyl unit have been described. Although these optically active a-substituted allylboron reagents are generally less convenient to synthesize than those with conventional auxiliaries (Section 1.3.3.3.3.1.4.), this disadvantage is compensated for by the fact that their reactions with aldehydes often occur with almost 100% asymmetric induction. Thus, the enantiomeric purity as well as the ease of preparation of these chiral a-substituted allylboron reagents are important variables that determine their utility in enantioselective allylboration reactions with achiral aldehydes, and in double asymmetric reactions with chiral aldehydes (Section 1.3.3.3.3.2.4.). 

An excellent synthetic method for asymmetric C—C-bond formation which gives consistently high enantioselectivity has been developed using azaenolates based on chiral hydrazones. (S)-or (/ )-2-(methoxymethyl)-1 -pyrrolidinamine (SAMP or RAMP) are chiral hydrazines, easily prepared from proline, which on reaction with various aldehydes and ketones yield optically active hydrazones. After the asymmetric 1,4-addition to a Michael acceptor, the chiral auxiliary is removed by ozonolysis to restore the ketone or aldehyde functionality. The enolates are normally prepared by deprotonation with lithium diisopropylamide. 

Good results were obtained with (R)-0-acryloylpantolactone (4) in which the dienophile was incorporated with a smaller chiral auxiliary. Some results are reported in Table 4.4, where the cycloadditions catalyzed by Zn(II)-, Fe(II)- and Ti(IV)-K-10 exchanged montmorillonite calcined at 120 °C and 550 °C are compared with those that were not catalyzed and with TiCU- and EtAlCh-catalyzed reactions. Among the metal-clays activated, the Ti(IV)-K-10 was the best catalyst with high conversion and acceptable enantioselectivity obtained after 2 h. 

---