Enantioselective synthesis products

Miller, M. T., Ge, Z. and Mao, B. Development of a nonchiral HPLC method with circular dichroism detection for chiral analysis of molybdenum-catalyzed enantioselective synthesis products. Chirality 14 659, 2002. 

Enantiomers (Section 7 1) Stereoisomers that are related as an object and its nonsupenmposable mirror image Enantioselective synthesis (Section 27 4) Reaction that converts an achiral or racemic starting material to a chiral product in which one enantiomer is present in excess of the other... 

Depending on the stereoselectivity of the reaction, either the or the 5 configuration can generated at C-2 in the product. This corresponds to enantioselective synthesis of the d md L enantiomers of a-amino acids. Hydrogenation using chiral catalysts has been carefully investigated. The most effective catalysts for the reaction are ihodiiun... 

The Pictet-Spengler condensation has been of vital importance in the synthesis of numerous P-carboline and isoquinoline compounds in addition to its use in the formation of alkaloid natural products of complex structure. A tandem retro-aldol and Pictet-Spengler sequence was utilized in a concise and enantioselective synthesis of 18-pseudoyohimbone. Amine 49 cyclized under acidic conditions to give the condensation product 50 in good yield. Deprotection of the ketone produced the indole alkaloid 51. 

A series of chiral binaphthyl ligands in combination with AlMe3 has been used for the cycloaddition reaction of enamide aldehydes with Danishefsky s diene for the enantioselective synthesis of a chiral amino dihydroxy molecule [15]. The cycloaddition reaction, which was found to proceed via a Mukaiyama aldol condensation followed by a cyclization, gives the cycloaddition product in up to 60% yield and 78% ee. 

The high enantioselectivity of the exo product opens up a new and readily accessible route to an enantioselective synthesis of interesting isoquinoline alkaloids (Scheme 6.15) [35]. The tricyclic isoxazolidine exo-15b was obtained from the 1,3-dipolar cydoaddition reaction as the pure exo isomer and with 58% ee [34]. As shown in Scheme 6.15 the exo product from the 1,3-dipolar cydoaddition was converted into 17 in two steps without racemization at the chiral center. In addition to the illustrated synthesis, the 6,7-dimethoxy-derived isoxazolidine exo-15b is a very useful precursor for the synthesis of naturally occurring isoquinoline alkaloids [36-40]. 

For the performance of an enantioselective synthesis, it is of advantage when an asymmetric catalyst can be employed instead of a chiral reagent or auxiliary in stoichiometric amounts. The valuable enantiomerically pure substance is then required in small amounts only. For the Fleck reaction, catalytically active asymmetric substances have been developed. An illustrative example is the synthesis of the tricyclic compound 17, which represents a versatile synthetic intermediate for the synthesis of diterpenes. Instead of an aryl halide, a trifluoromethanesul-fonic acid arylester (ArOTf) 16 is used as the starting material. With the use of the / -enantiomer of 2,2 -Z7w-(diphenylphosphino)-l,F-binaphthyl ((R)-BINAP) as catalyst, the Heck reaction becomes regio- and face-selective. The reaction occurs preferentially at the trisubstituted double bond b, leading to the tricyclic product 17 with 95% ee. °... 

Several approaches to enantioselective synthesis have been taken, but the most efficient are those that use chiral catalysts to temporarily hold a substrate molecule in an unsymmetrical environment—exactly the same strategy that nature uses when catalyzing reactions with chiral enzymes. While in that unsymmetrical environment, the substrate may be more open to reaction on one side than on another, leading to an excess of one enantiomeric product over another. As an analog)7, think about picking up a coffee mug in your... 

Enantioselective synthesis (Chapter 19 Focus On) A reaction method that yields only a single enantiomer of a chiral product starting from an achiral substrate. 

An (E)-selective CM reaction with an acrylate (Scheme 61) was applied by Smith and O Doherty in the enantioselective synthesis of three natural products with cyclooxygenase inhibitory activity (cryptocarya triacetate (312), cryptocaryolone (313), and cryptocaryolone diacetate (314)) [142]. CM reaction of homoallylic alcohol 309 with ethyl acrylate mediated by catalyst C led (E)-selectively to d-hydroxy enoate 310 in near quantitative yield. Subsequent Evans acetal-forming reaction of 310, which required the trans double bond in 310 to prevent lactonization, led to key intermediate 311 that was converted to 312-314. 

A [2 + 2] photoaddition-cycloreversion was applied to the enantioselective synthesis of the natural product byssocMamic add (Figure 6.11). Desymmetrization of a meso-cyclopentene dimethyl ester with PLE in pH 7 buffer-acetone (5 1) provided a monoacid, one of the photopartners. It is noteworthy that both enantiomers of this natural product were synthesized from the same monoacid [58]. 

Several reaction types and functional group transformations will be outlined in the following sections with a major emphasis on those biocatalytic processes of major impact on enantioselective synthesis and chiral product preparation. 

Because of the nature of the transition state in the pericyclic mechanism, optically active substrates with a chiral carbon at C-3 or C-4 transfer the chirality to the product, making this an enantioselective synthesis (see p. 1451 for an example in the mechanistically similar Claisen rearrangement). ... 

The condensation of nitro compounds and imines, the so-called aza-Henry or nitro-Mannich reaction, has recently emerged as a powerful tool for the enantioselective synthesis of 1,2-diamines through the intermediate /3-amino nitro compounds. The method is based on the addition of a nitronate ion (a-nitro carbanion), generated from nitroalkanes, to an imine. The addition of a nitronate ion to an imine is thermodynamically disfavored, so that the presence of a protic species or a Lewis acid is required, to activate the imine and/or to quench the adduct. The acidic medium is compatible with the existence of the nitronate anion, as acetic acid and nitromethane have comparable acidities. Moreover, the products are often unstable, either for the reversibility of the addition or for the possible /3-elimination of the nitro group, and the crude products are generally reduced, avoiding purification to give the desired 1,2-diamines. Hence, the nitronate ion is an equivalent of an a-amino carbanion. 

Scheme 10.12 gives some examples of enantioselective cyclopropanations. Entry 1 uses the W.s-/-butyloxazoline (BOX) catalyst. The catalytic cyclopropanation in Entry 2 achieves both stereo- and enantioselectivity. The electronic effect of the catalysts (see p. 926) directs the alkoxy-substituted ring trans to the ester substituent (87 13 ratio), and very high enantioselectivity was observed. Entry 3 also used the /-butyl -BOX catalyst. The product was used in an enantioselective synthesis of the alkaloid quebrachamine. Entry 4 is an example of enantioselective methylene transfer using the tartrate-derived dioxaborolane catalyst (see p. 920). Entry 5 used the Rh2[5(X)-MePY]4... 

Section B shows some Hofmann rearrangements. Entry 9, using basic conditions with bromine, provided an inexpensive route to an intermediate for a commercial synthesis of an herbicide. Entry 10, which uses the Pb(OAc)4 conditions (see p. 949), was utilized in an enantiospecific synthesis of the naturally occurring analagesic (-)-epibatidine. Entry 11 uses phenyliodonium diacetate as the reagent. The product is the result of cyclization of the intermediate isocyanate and was used in an enantioselective synthesis of the antianxiety drug (tf)-fluoxetine. 

For a discussion of this approach to enantioselective synthesis, see S. Hanessian, Total Synthesis of Natural Products The Chiron Approach, Pergamon Press, New York, 1983. 

The Prelog-Djerassi lactone (abbreviated here as P-D lactone) was originally isolated as a degradation product during structural investigations of antibiotics. Its open-chain equivalent 3 is typical of the methyl-branched carbon chains that occur frequently in macrolide and polyether antibiotics. The compound serves as a test case for the development of methods of control of stereochemistry in such polymethylated structures. There have been more than 20 different syntheses of P-D lactone.24 We focus here on some of those that provide enantiomerically pure product, as they illustrate several of the methods for enantioselective synthesis.25... 

The syntheses in Schemes 13.45 and 13.46 illustrate the use of oxazolidinone chiral auxiliaries in enantioselective synthesis. Step A in Scheme 13.45 established the configuration at the carbon that becomes C(4) in the product. This is an enolate alkylation in which the steric effect of the oxazolidinone chiral auxiliary directs the approach of the alkylating group. Step C also used the oxazolidinone structure. In this case, the enol borinate is formed and condensed with an aldehyde intermediate. This stereoselective aldol addition established the configuration at C(2) and C(3). The configuration at the final stereocenter at C(6) was established by the hydroboration in Step D. The selectivity for the desired stereoisomer was 85 15. Stereoselectivity in the same sense has been observed for a number of other 2-methylalkenes in which the remainder of the alkene constitutes a relatively bulky group.28 A TS such as 45-A can rationalize this result. 

In a recently published report by MacMillan s group [121] on the enantioselective synthesis of pyrroloindoline and furanoindoline natural products such as (-)-flustramine B 2-219 [122], enantiopure amines 2-215 were used as organocatalysts to promote a domino Michael addition/cyclization sequence (Scheme 2.51). As substrates, the substituted tryptamine 2-214 and a, 3-unsaturated aldehydes were used. Reaction of 2-214 and acrolein in the presence of 2-215 probably leads to the intermediate 2-216, which cyclizes to give the pyrroloindole moiety 2-217 with subsequent hydrolysis of the enamine moiety and reconstitution of the imidazolid-inone catalyst. After reduction of the aldehyde functionality in 2-217 with NaBH4 the flustramine precursor 2-218 was isolated in very good 90 % ee and 78 % yield. 

The same authors also used this approach for an enantioselective synthesis of the natural product (-i-)-royleanone (4-54), a member of the abietane diterpenoid family [17]. The enantiopure sulfoxide 4-50 was oxidized using DDQ to give crude 1,4-ben-zoquinone 4-51, which by reaction with the diene 4-52 in CH2C12 under high pressure led to the tricyclic compound 4-53 with 97 % ee and 60% yield based on 4-50 (Scheme 4.11). Hydrogenation of the unconjugated double bond in 4-53 afforded 35% of the desired compound 4-54 after crystallization to separate it from the unwanted cis-isomer. 

An enantioselective synthesis of both (R)- and (5)-a-alkylcysteines 144 and 147 is based on the phase-transfer catalytic alkylation of fert-butyl esters of 2-phenyl-2-thiazoline-4-carboxylic acid and 2-ort/ro-biphenyl-2-thiazoline-4-carboxylic acid, 142 and 145 <06JOC8276>. Treatment of 142 and 145 with alkyl halides and potassium hydroxide in the presence of chiral catalysts 140 and 141 gives the alkylated products, which are hydrolyzed to (R)- and (S)-a-alkylcysteines 144 and 147, respectively, in high enantioselectivity. This method may have potential for the practical synthesis of chiral a-alkylcysteines. 

---