Electrolytes nonaqueous solvents

Micellar properties are affected by changes in the environment, eg, temperature, solvents, electrolytes, and solubilized components. These changes include compHcated phase changes, viscosity effects, gel formation, and Hquefication of Hquid crystals. Of the simpler changes, high concentrations of water-soluble alcohols in aqueous solution often dissolve micelles and in nonaqueous solvents addition of water frequendy causes a sharp increase in micellar size. 

Most 2,5-unsubstituted pyrroles and thiophenes, and most anilines can be polymerized by electrochemical oxidation. For pyrroles, acetonitrile,54 or aqueous55 electrolyte solutions are normally used, while the polymerization of thiophenes is performed almost exclusively in nonaqueous solvents such as acetonitrile, propylene carbonate, and benzonitrile. 0 Polyanilines are generally prepared from a solution of aniline in aqueous acid.21 Platinum or carbon electrodes have been used in most work, although indium-tin oxide is routinely used for spectroelectrochemical experiments, and many other electrode materials have also been employed.20,21... 

The influence of interfaeial potentials (diffusion or liquid junction potentials) established at the boundary between two different electrolyte solutions (based on e.g. aqueous and nonaqueous solvents) has been investigated frequently, for a thorough overview see Jakuszewski and Woszezak [68Jak2]. Concerning the usage of absolute and international Volt see preceding chapter. 

Nonaqueous electrolyte solutions are analogous to aqueous solutions they, too, are systems with a liquid solvent and a solute or solutes dissociating and forming solvated ions. The special features of water as a solvent are its high polarity, e = 78.5, which promotes dissocation of dissolved electrolytes and hydration of the ions, and its protolytic reactivity. When considering these features, we can group the nonaqueous solvents as follows ... 

A point meriting attention is the voltage difference above. Doped polymers are rather electropositive (up to more than 4 V vs. a lithium electrode in the same solution), so much so that charging may have to be limited in order not to exceed the stability limits of the electrolyte (typically, propylene carbonate or acetonitrile as aprotic nonaqueous solvents). 

In fact, the orientation of water at the potential of zero charge is expected to depend approximately linearly on the electronegativity of the metal.9 This orientation (see below) may be deduced from analysis of the variation of the potential drop across the interface with surface charge for different metals and electrolytes. Such analysis leads to the establishment of a hydrophilicity scale of the metals ( solvophilicity for nonaqueous solvents) which expresses the relative strengths of metal-solvent interaction, as well as the relative reactivities of the different metals to oxygen.23... 

W.J. Macknight, E.A. Ponomarenko, and D.A. Tirrell, Self-assembled poly electrolyte-surfactant complexes in nonaqueous solvents and in the solid state. Acc. Chem. Res. 31, 781-788 (1998). 

Water is involved in most of the photodecomposition reactions. Hence, nonaqueous electrolytes such as methanol, ethanol, N,N-d i methyl forma mide, acetonitrile, propylene carbonate, ethylene glycol, tetrahydrofuran, nitromethane, benzonitrile, and molten salts such as A1C13-butyl pyridium chloride are chosen. The efficiency of early cells prepared with nonaqueous solvents such as methanol and acetonitrile were low because of the high resistivity of the electrolyte, limited solubility of the redox species, and poor bulk and surface properties of the semiconductor. Recently, reasonably efficient and fairly stable cells have been prepared with nonaqueous electrolytes with a proper design of the electrolyte redox couple and by careful control of the material and surface properties [7], Results with single-crystal semiconductor electrodes can be obtained from table 2 in Ref. 15. Unfortunately, the efficiencies and stabilities achieved cannot justify the use of singlecrystal materials. Table 2 in Ref. 15 summarizes the results of liquid junction solar cells prepared with polycrystalline and thin-film semiconductors [15]. As can be seen the efficiencies are fair. Thin films provide several advantages over bulk materials. Despite these possibilities, the actual efficiencies of solid-state polycrystalline thin-film PV solar cells exceed those obtained with electrochemical PV cells [22,23]. 

The techniques and apparatus which have been developed to measure electrolytic conductivities in nonaqueous solutions have been adapted from aqueous conductivity measurements with some modifications. Direct current measurements suffer the limitation of requiring reversible electrodes - a serious limitation in nonaqueous solvents. Although this problem can be circumvented U in some instances, virtually all precision conductance data have been taken using the alternating current method. General descriptions of this method are given in several sources. 2>3)... 

In any study of electrosorption of neutral molecules on metallic electrodes, the ions of supporting electrolytes should not be specifically adsorbed. Nevertheless, the interaction of the electrolyte ions with the electrode surface may depend on the interaction of the ions with the solvent. Usually, the stronger the ion-solvent interaction, the weaker the adsorption of the ion. Since the ions are more weakly solvated in nonaqueous solvents than in water, the ions that are not adsorbed from aqueous solutions may still be adsorbed from organic solvents. However, even in the absence of... 

Electrolytes are ubiquitous and indispensable in all electrochemical devices, and their basic function is independent of the much diversified chemistries and applications of these devices. In this sense, the role of electrolytes in electrolytic cells, capacitors, fuel cells, or batteries would remain the same to serve as the medium for the transfer of charges, which are in the form of ions, between a pair of electrodes. The vast majority of the electrolytes are electrolytic solution-types that consist of salts (also called electrolyte solutes ) dissolved in solvents, either water (aqueous) or organic molecules (nonaqueous), and are in a liquid state in the service-temperature range. [Although nonaqueous has been used overwhelmingly in the literature, aprotic would be a more precise term. Either anhydrous ammonia or ethanol qualifies as a nonaqueous solvent but is unstable with lithium because of the active protons. Nevertheless, this review will conform to the convention and use nonaqueous in place of aprotic .]... 

Like LiAsFe, LiBF4 is a salt based on an inorganic superacid anion and has moderate ion conductivity in nonaqueous solvents (Table 3). It was out of favor in the early days of lithium battery research because the ether-based electrolytes containing it were found to result in poor lithium cycling efficiencies, which decayed rapidly with cycle number. ° The reactivity of LiBF4 with lithium was suspected as discoloration occurred with time or heating. 

One major drawback of these sulfonate salts is their poor ion conductivity in nonaqueous solvents as compared with other salts. In fact, among all the salts listed in Table 3, LiTf affords the lowest conducting solution. This is believed to be caused by the combination of its low dissociation constant in low dielectric media and its moderate ion mobil-ityi29 3 compared with those of other salts. Serious ion pairing in LiTf-based electrolytes is expected, especially when solvents of low dielectric constant such as ethers are used. ... 

For lithium electrolytes, the only variable in salt structure is the anion. In a given nonaqueous solvent system, the dissociation of a lithium salt would be... 

On the basis of the findings on LiBOB performance in nonaqueous solvents and other advances made to improve the low-temperature performance of lithium ion electrolytes. Jow and co-workers proposed that an electrolyte with a much wider temperature range could be formulated using LiBOB alone or in combination with other salts. The following section (8.4) will be dedicated to this topic. 

This chapter provides the groundwork of solution chemistry that is relevant to solvent extraction. Some of the concepts are rather elementary, but are necessary for the comprehension of the rather complicated relationships encountered when the solubilities of organic solutes or electrolytes in water or in nonaqueous solvents are considered. They are also relevant in the context of complex and adduct formation in aqueous solutions, dealt with in Chapter 3 and of the distribution of solutes of diverse kinds between aqueous and immiscible organic phases dealt with in Chapter 4. 

Ks = [S62-][S8]VV[Sg2-]) in nonaqueous solvents with supporting electrolyte at room temperature [32]... 

The behavior of the Zn(II)/Zn(Hg) system in nonaqueous solvents containing tetraalkylammonium perchlorate ions was presented in works [70-73]. The data show that the standard rate constant, kg, in DMF and DMSO [70] solutions changes with size of the electrolyte cation in the order kg (TPA+) > kg (TBA+) > kg (TEA+) kg... 

More data regarding Au nonaqueous solvent interfaces, including surface preparation problems, can be found elsewhere [4] and in references cited therein. Table 2 summarizes selected values of the potential of zero charge for the pc-Au electrodes in contact with some solvent-electrolyte systems. 

Tab. 2 Potentials of zero charge ( pzc) for pc-Au electrode in contact with selected nonaqueous solvent-electrolyte systems. The pzc for pc-Au IH2O is equal to 0.20 V versus aqueous standard hydrogen electrode (SHE) and 0.85 V versus bis(biphenyl)chromium(l)/(0) redox couple (BBCr) [4]...

---