Electrically addressed displays

To some extent, development of smectic materials has been slow and usually come as an off shoot of work on nematics. For example, the binary mixture shown in (38) exhibits a room temperature smectic A, a short range nematic, and is of positive dielectric anisotropy.Such properties may be used in thermally addressed displays where a transition from a scattering to a clear state forms the optical effect. This transition may also be effected by an electric field. Obviously, more work on useful smectics is required although their inherent high viscosity is a problem. 

Dyes for Color Filters. Colorhquid crystal display systems consist of LSI drivers, glass plates, polarizers, electrodes (indium—tin oxide), and microcolor filters. The iadependent microcolor filter containing dyes is placed on each Hquid crystal pixel addressed electrically and acts as an iadividual light switch. All colors can be expressed by the light transmitted through each filter layer of the three primary colors, ie, red, green, and blue (Fig. 12). 

Many LCDs are based on active-matrix addressing, in which an active device circuit containing one or more TFTs is connected to each pixel. The TFT circuit at each pixel effectively acts as an individual electrical switch that provides the means to store display information on a storage capacitor for the entire frame time, such that the pixel can remain emitting during this entire time rather than for a small fraction of time, as is the case in passive addressing. 

Nanocrystalline systems display a number of unusual features that are not fully understood at present. In particular, further work is needed to clarify the relationship between carrier transport, trapping, inter-particle tunnelling and electron-electrolyte interactions in three dimensional nan-oporous systems. The photocurrent response of nanocrystalline electrodes is nonlinear, and the measured properties such as electron lifetime and diffusion coefficient are intensity dependent quantities. Intensity dependent trap occupation may provide an explanation for this behaviour, and methods for distinguishing between trapped and mobile electrons, for example optically, are needed. Most models of electron transport make a priori assumptions that diffusion dominates because the internal electric fields are small. However, field assisted electron transport may also contribute to the measured photocurrent response, and this question needs to be addressed in future work. 

---