Light transmitted

Relationships between the intensity of incident light, sample thickness, concentration and intensity of transmitted light are embodied in Beer s law and Lambert s law. ... 

A point light source is imaged onto the specimen by the objective and the transmitted light collected by the collector lens and detected by a broad-area detector in the case of reflection microscopy, the objective lens also serves simultaneously as a collector (see figure Bl.18.10. The resolution is solely detennined by the objective lens, because the collector has no imaging fimction and only collects the transmitted light. The... 

Contrast. This can be quantified as the ratio of transmitted light intensity in the bright state compared to the dar... 

Unwanted stmctures in the film plane—often found within LB films fonned from simple rodlike molecules or from molecules polymerized after deposition—can be problematic, since many possible applications of such films require a unifonn stmcture within the plane. On the other hand, however, the production of a system in which the stmcture within the plane is so disordered that there exist no stmctural features large enough to cause problems would also render applications possible. In tliree-dimensional materials, for example, both inorganic glasses and many polymers are capable of transmitting light without any appreciable scattering for substantial distances. 

From now on we shall describe the scattered light by Eq, (10.30) exclusively, rather than considering the separate components. We shall also consider 0 only in the xy plane, in which case we use the symbol 6 to describe this angle. By convention, the incident light approaches the scattering dipole from 6 = 180°, and the transmitted light leaves the sample at 0 = 0°. 

Optical windows of highly purified magnesium fluoride which transmit light from the vacuum ultraviolet (140 nm) into the infrared (7) are recommended for use as ultraviolet optical components for use in space exploration. 

Fig. 2ab. Photomicrographs of foam cell stmcture (a) extmded polystyrene foam, reflected light, 26 x (b) polyurethane foam, transmitted light, 26 x (c) polyurethane foam, reflected light, 12 x (d) high density plastic foam, transmitted light, 50x (22).

The contrast for specimen detail in the field of view is gready enhanced by darkfield illumination (10). The degree of contrast and sensitivity of detection of smaH-object details depend on the relative indices of the specimen and the mounting Hquid and on the intensity of the illumination. Darkfield illumination is not, however, a satisfactory solution for biologists who need direct transmitted light in order to observe specimens, especially stained specimens. It is, however, very usefiil in detecting asbestos fibrils that often exist in door tiles or water and air samples as 20-nm fibers (10 times finer than the resolution of an asbestos analyst s usual microscope) (11). Darkfield illumination yields an uimatural appearance and difficulties in interpretation hence, a need for better contrast methods stiU exists. 

Absorption spectroscopy records depletion by the sample of radiant energy from a continuous or frequency-tunable source, at resonance frequencies that are characteristic of various energy levels ia atoms or molecules. The basic law of absorption, credited to Bouguer-Lambert-Beer, states that ia terms of the iacident, Jq, and transmitted, light iatensities, the absorbance, M (or transmittance, T), is given by equation 1 ... 

Colorant Mixing. A colorant, whether a dye dissolved in a medium or pigment particles dispersed in it, produces color by absorbing and/or scattering part of the transmitted light. If only absorption is present, the Beer-Lambert law appHes ... 

Figure 3.10. Fabry-Perot fringe records of a moving reflector. Comparison of the two different records suggest superior fringe signals when optical fibers are used to transmit light signals (Gidon et al., 1984).

---