Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Effectiveness of elastomer

To assess the effect of elastomer degradation on composite performance, additional composites were fabricated with the same 121°C cure epoxy without any addition of the elastomer (211. The expansion behavior of the modified epoxy composite was similar to the toughened material. For electron doses less than 10 rads the CTE of the toughened and untoughened composites were essentially the same which suggests that the epoxy matrix and not the elastomeric component controls the thermal expansion behavior. [Pg.250]

K. Oksman and C. Clemons. Effect of elastomers and coupling agent on impact performance of wood flour-filled polypropylene. In Fourth International Conference on Woodfiber-Plastic Composites, Madison, WI, May 12-14, 1997, pp. 144-155. [Pg.200]

Premphet, K. Horanont, P.(2000). Polymer, Phase structure of ternary polypropylene /elastomer /filler composites effect of elastomer pxrlarity. Polymer, 41, 9283-9290,... [Pg.355]

Zhang, L. Wang, Z.H. Huang, R. Li, L.B. Zhang, XY. (2002). PP/elastomer/calcium carbonate composites effect of elastomer and calcium carbonate contents on the deformation and impact behavior. Journal of Materials Science, vol.37, pp.2615-2621, ISSN 1573-4803... [Pg.356]

EFFECT OF ELASTOMERS ON ADHESIVE PROPERTIES Single Lap Shear Bond Testing... [Pg.472]

EFFECT OF ELASTOMER CHAIN LENGTH ON ADHESIVE PROPERTIES Adhesive Formulations... [Pg.475]

A.K. St. Clair, T.L. St. Clair, and S.A. Ezzell, "The Effect of Elastomer Chain Length on Properties of Silicone-Modified Polyimide Adhesives," NASA TM-83172 (1981). [Pg.480]

Fig. 17.8 Notched impact strength of PP/PP-g-MA/ MMT/EOR nanocomposites, (a) Effect of MMT content and PP-g-MA/organoclay ratio, (b) effect of elastomer particle size (Tiwari et al. 2012)... Fig. 17.8 Notched impact strength of PP/PP-g-MA/ MMT/EOR nanocomposites, (a) Effect of MMT content and PP-g-MA/organoclay ratio, (b) effect of elastomer particle size (Tiwari et al. 2012)...
Fig. 17.10 The effect of elastomer MFI on MMT particle aspect ratio of PP/PP-g-MA/MMT/EOR nanocomposite prepared from various molecular weight PP. Gray- and black- filled symbol represents nanocomposites containing elastomers having 39 and 28 wt% octene content, respectively. The EOR and MMT content is based on the total nanocomposite weight (Tiwari and Paul 2011b)... Fig. 17.10 The effect of elastomer MFI on MMT particle aspect ratio of PP/PP-g-MA/MMT/EOR nanocomposite prepared from various molecular weight PP. Gray- and black- filled symbol represents nanocomposites containing elastomers having 39 and 28 wt% octene content, respectively. The EOR and MMT content is based on the total nanocomposite weight (Tiwari and Paul 2011b)...
D-B transition temperature, and the effect of elastomer MFI on the D-B transitirMi temperature becomes less prominent with the increased PP molecular weight as seen in Fig. 17.18. The nanocomposites based on the high-octene-content elastomer ( 39 wt%) also lead to a lower D-B transition temperature compared with nanocomposites based on the elastomer with low octene content ( 28 wt%). The toughening mechanism was not explored for this system a more detailed study in this area would further enhance the understanding of the role of organoclay in elastomer-toughened nanocomposites with partially exfoliated clay particles. [Pg.1511]

A RESEARCH NOTE ON THE EFFECTS OF ELASTOMER PARTICLES SIZE IN THE ASPHALT CONCRETE... [Pg.34]

A Research Note on the Effects of Elastomer Particles Size... [Pg.36]

Quantitative interpretation of the toughening effects of elastomers in blends and in composites, particularly the polymer-modifled ceramics. [Pg.61]

Fig. 4. Effect of elastomer prepolymerization on RPVF and phase continuity for 15/85 Lunaria... Fig. 4. Effect of elastomer prepolymerization on RPVF and phase continuity for 15/85 Lunaria...
Table 7. Effect of Elastomer Prepolymerization on Stress-Strain and Impact Response. Table 7. Effect of Elastomer Prepolymerization on Stress-Strain and Impact Response.
Sahnoune F, Lopez-Cuesta J M and Crespy A (1999) Effect of elastomer interfacial agents on tensile and impact properties of CaC03 filled HDPE, J Mater Sci 34 535-544. [Pg.155]

Kelnar J, Kotek J, Kapralkovtl L, Hromddkovd J and Kratochvfl J (2006) Effect of elastomer type and functionality on the behavior of toughened polyamide nanoconipos-ites, J Appl Polym Sci 100 1571-1576. [Pg.415]

Effects of elastomer and storage on bound rubber. (Data from J.L. Leblanc, P. Hardy, Kautsch. Gummi, Kunstst, 44,1119-1124,1991 curves are drawn using a model described hereafter.)... [Pg.119]

See other pages where Effectiveness of elastomer is mentioned: [Pg.542]    [Pg.109]    [Pg.539]    [Pg.542]    [Pg.373]    [Pg.374]    [Pg.375]    [Pg.376]    [Pg.377]    [Pg.539]    [Pg.91]    [Pg.477]    [Pg.1503]    [Pg.1505]    [Pg.1506]    [Pg.1507]    [Pg.1513]    [Pg.1513]    [Pg.1516]    [Pg.257]    [Pg.259]   


SEARCH



Effect of Monol Content on One-Shot Elastomer Processability and Properties

Effect of Primary Hydroxyl Concentration on One-Shot Elastomer Processability

Effects of Radiation on Individual Elastomers

Elastomer effect

© 2024 chempedia.info